13.340.40 防护手套 标准查询与下载
共找到 278 条与 防护手套 相关的标准，共 19 页
This part of ISO 13999 specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut-resistant gloves, arm guards and protective sleeves made of materials other than chain mail and rigid metal and plastics. They provide less cut and stab protection than the products specified in ISO 13999-1 and are intended to be used only in work where the knife is not finely pointed or it is used only to cut away from the hand and arm.
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-11
- 实施
This European Standard specifies requirements, test methods, marking and information to be supplied, for protective gloves against the mechanical risks of abrasion, blade cut, tear and puncture. This standard is only applicable in conjunction with EN 420. The test methods developed in this standard can also be applicable to arm protectors which are protective devices separate from the glove or the clothing.
Protective gloves against mechanical risks
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-09-25
- 实施
- 2003-09-25
This standard defines the general requirements and relevant test procedures for glove design and construction, resistance of glove materials to water penetration, innocuousness, comfort and efficiency, marking and information supplied by the manufacturer applicable to all protective gloves. NOTE It can also be applicable to arm protectors and gloves permanently incorporated in containment enclosures. This European Standard does not address the protective properties of gloves and therefore should not be used alone but only in combination with the appropriate specific European Standard(s). A non exhaustive list of these standards is given in the Bibliography.
Protective gloves - General requirements and test methods
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-09-24
- 实施
- 2003-09-24
This standard defines the general requirements and relevant test procedures for glove design and construction, resistance of glove materials to water penetration, innocuousness, comfort and efficiency, marking and information supplied by the manufacturer applicable to all protective gloves. NOTE It can also be applicable to arm protectors and gloves permanently incorporated in containment enclosures. This European Standard does not address the protective properties of gloves and therefore should not be used alone but only in combination with the appropriate specific European Standard(s). A non exhaustive list of these standards is given in the Bibliography.
Protective gloves - General requirements and test methods
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-09-24
- 实施
- 2003-09-24
This European Standard specifies a test method for the penetration resistance of gloves that protect against chemicals and/or micro-organisms. At this time it is believed that gloves which resist penetration, when tested according to this Part of EN 374, will form an effective barrier to micro-biological hazards.
Protective gloves against chemicals and micro-organisms - Determination of resistance to penetration
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-09-16
- 实施
- 2003-09-16
This European Standard specifies the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact. It is emphasised that the test does not represent conditions likely to be found in service, and the use of test data should be restricted to comparing materials chiefly on a relative basis in broad categories of breakthrough times.
Protective gloves against chemicals and micro-organisms - Determination of resistance to permeation by chemicals
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-09-16
- 实施
- 2003-09-16
This standard specifies the requirements for gloves to protect the user against chemicals and/or micro-organisms and defines terms to be used. This standard should be used in conjunction with EN 420. This standard does not specify requirements for protection against any mechanical hazards.
Protective gloves against chemicals and micro-organisms - Terminology and performance requirements
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-09-16
- 实施
- 2003-09-16
This European Standard specifies a test method forThe penetration resistance of gloves that protect againstchemicals and/or micro-organisms.AtThis time it is believed that gloves which resist penetration, when tested according toThis part of EN 374, willform an effective barrier to micro-biological hazards.
Protective Gloves Against Chemicals and Micro- Organisms - Part 2 : Determination of Resistance to Penetration
- ICS
- 13.340.40
- CCS
- 发布
- 2003-09-01
- 实施
This European Standard specifies the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact.It is emphasised that the test does not represent conditions likely to be found in service, and the use of test data should be restricted to comparing materials chiefly on a relative basis in broad categories of breakthrough times.
Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals Incorporating corrigendum March 2006
- ICS
- 13.340.40
- CCS
- 发布
- 2003-09-01
- 实施
This standard specifies the requirements for gloves to protectThe user against chemicals and/or micro-organismsand defines terms to be used.This standard should be used in conjunction with EN 420.This standard does not specify requirements for protection against any mechanical hazards.
Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
- ICS
- 13.340.40
- CCS
- 发布
- 2003-09-01
- 实施
This standard definesThe general requirements and relevant test procedures for glove design and construction, resistance of glove materials to water penetration, innocuousness, comfort and efficiency, marking and information supplied byThe manufacturer applicable to all protective gloves. NOTE It can also be applicable to arm protectors and gloves permanently incorporated in containment enclosures.This European Standard does not addressThe protective properties of gloves andTherefore should not be used alone but only in combination withThe appropriate specific European Standard(s). A non exhaustive list of these standards is given inThe Bibliography.
Protective gloves - General requirements and test methods (Incorporates Amendment A1: 2009)
- ICS
- 13.340.40
- CCS
- 发布
- 2003-09-01
- 实施
Applies to insulating sleeves for the protection of workers from accidental contact with live electrical conductors, apparatus or circuits.
Sleeves of insulating material for live working
- ICS
- 13.340.40
- CCS
- 发布
- 2003-08-11
- 实施
- 2003-06-06
This part of ISO 11393 specifies the requirements and test methods for gloves that are intended to provide protection against cuts by a hand-held chain-saw, including requirements for identification, marking and information for the user. The method for measurement of protective coverage, the apparatus and the test method for assessing resistance to cutting, and the ergonomic assessment are specified. An informative annex on risk analysis, glove ergonomics and glove selection is provided.
Protective clothing for users of hand-held chain-saws - Part 4: Test methods and performance requirements for protective gloves
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-08
- 实施
Protective gloves for professional motorcycle riders - Requirements and test methods.
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-07-01
- 实施
- 2003-07-05
This European Standard defines minimum performance requirements and test methods for firefighters' protective gloves. This European Standard applies only to firefighters' protective gloves which protect the hands during normal firefighting, including search and rescue. These gloves are not intended for deliberate handling of liquid chemicals, but provide some protection against accidental contact with chemicals. Protective gloves for special operations within firefighting service are excluded from the scope of this standard.
Protective gloves for firefighters
- ICS
- 13.340.40
- CCS
- C85
- 发布
- 2003-06-25
- 实施
- 2003-06-25
This standard defines minimum performance requirements and test methods for firefighters' protective gloves. This standard applies only to firefighters' protective gloves which protect the hands during normal firefighting, including search and rescue. These gloves are not intended for deliberate handling of liquid chemicals, but provide some protection against accidental contact with chemicals. Protective gloves for special operations within firefighting service are excluded from the scope of this standard.
Protective gloves for firefighters
- ICS
- 13.340.40
- CCS
- C85
- 发布
- 2003-06-25
- 实施
- 2003-06-25
This European Standard defines minimum performance requirements and test methods for firefighters' protective gloves. This European Standard applies only to firefighters' protective gloves which protect the hands during normal firefighting, including search and rescue. These gloves are not intended for deliberate handling of liquid chemicals, but provide some protection against accidental contact with chemicals. Protective gloves for special operations within firefighting service are excluded from the scope of this standard.
Protective gloves for firefighters (Incorporates Amendment A1: 2008; Incorporating corrigendum June 2009)
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2003-06-23
- 实施
Protective gloves for professional motorcycle riders - Requirements and test methods
- ICS
- 13.340.40
- CCS
- 发布
- 2003-04-02
- 实施
- 2003-04-02
This European Standard applies to protective professional motorcycle riders gloves for use while riding motorcycles for on-road activities. It specifies the requirements for the sizing, ergonomic characteristics, mechanical properties, cleaning, marking and information for users. It also describes the appropriate test methods whereby conformity against these requirements can be assessed.
Protective gloves for professional motorcycle riders - Requirements and test methods; German version EN 13594:2002
- ICS
- 13.340.40
- CCS
- C73
- 发布
- 2002-10
- 实施
- 2002-10-01
This European Standard applies to protective professional motorcycle riders gloves for use while riding motorcycles for on-road activities. It specifies the requirements for the sizing, ergonomic characteristics, mechanical properties, cleaning, marking and information for users.
Protective gloves for professional motorcycle riders - Requirements and test methods
- ICS
- 13.340.40
- CCS
- 发布
- 2002-09-16
- 实施
- 2002-08-05
