17.100 力、重力和压力的测量 标准查询与下载

KS V 7031-2013 造船 辅机 仪表板

Shipbuilding－Auxiliary machines－Gauge boards

KS V 7013-2013 压力表在船上的应用

Application of pressure gauges on board

KS B 5342-2013 国产衡器

Domestic weighing instruments

DIN 16085:2013 电动有限接点装置的压力量规

Pressure gauges with electrical limit contact devices

JG/T 422-2013 土木工程用光纤光栅应变传感器

本标准规定了土木工程用光纤光栅应变传感器(以下简称传感器)的术语和定义、产品结构、产品分类及型号命名、产品参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于土木工程用光纤光栅应变传感器的生产、使用和检测。

Optical fiber grating strain sensor for civil engineering

VDI/VDE 2624 Blatt 4.1-2013 机械量的测量 性能测试站上测量扭矩的非旋转静态校准

The guideline describes the calibration of torque sensors in achievement test stands with a reference measuring system. It is valid for achievement test system, where the torque is measured in the rotating shaft line. This guideline is valid for the gradual (static) and continuous (quasi-static) calibration of torque measuring systems in installed condition. Procedures are described for the calibration of the sensors integrated in the test system as well as given references to the determination of the uncertainty of measurement. Further references are given to the documentation of the results.

Measurement of mechanical quantities - Non-rotating static calibration of the measure torque on performance test stations

JIS B 7615:2013 电子测量仪器.电磁环境试验方法

Electronic measuring instruments.Electromagnetic environment test method

JIS B 7505-2:2013 无液压力计.第2部分:交易或认证用测量仪表

Aneroid pressure gauges .Part 2: Measuring instruments used in transaction or certification

GOST R 8.840-2013 确保测量一致性的国家系统. 1 - 1·10 6 Pa范围内绝对压力测量装置的国家验证计划

State system for ensuring the uniformity of measurements. State verification schedule for means measuring absolute pressure in the range 1 - 1·10 6 Pa

GSO OIML D13:2012 检验/测试结果认可的双边或多边安排指南 表格（类型）批准 验证

This International Document is intended to serve as a guide for States wishing to prepare, on a bior multilateral basis, arrangements on the recognition of test results, of pattern approvals, and/or of verifications of measuring instruments (in brief : arrangements).

Guidelines for bi- or multilateral arrangements on the recognition of : Tests result – Pattern approvals – Verifications

GSO OIML D9:2012 计量监督原理

Metrological supervision is defined (VIML 2.3 [2]) as control exercised in respect of the manufacture, import, installation, use, maintenance and repair of measuring instruments and/or in respect of their use, performed in order to check that they are used correctly as regards the observance of metrology laws and regulations. It includes checking the correctness of the quantities indicated on and contained in prepackages. Metrological supervision in a given country must conform to the pertinent laws, regulations, decrees and decisions of competent national authorities and official bodies in the field of legal metrology. However, legislation may differ between individual countries. Therefore, the structure of metrological supervision in any country must take into account the economic system of that country, the principles of its legal system, its territorial organization, and also its other features and specific conditions. This Document reflects the ongoing efforts to eliminate technical barriers to trade and ensure equity in the marketplace. It is recommended that OIML Members refer to OIML D 1 Elements for a Law on Metrology [3] when drawing up their metrological legislation. The purpose of this International Document is to provide elements to be considered for developing a model of metrological supervision in Member States which can be used as a basis for the harmonization of metrological supervision at an international level.

Principles of Metrological Supervision

DB22/T 1520-2011 钢球硬度无损自动分选机

Steel ball hardness non-destructive automatic sorting machine

GOST R 8.802-2012 国家测量一致性保证体系.250 MPa压力以下测量方法的国家一级标准和全验证表

State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring pressure up to 250 MPa

VDI/VDE 2624 Blatt 3.1-2011 机械量的测量 弹簧带软管夹测试装置的校准说明

The guideline describes the calibration of 4-chanel force-measurement systems, which are used for determination of radial stresses and their distributions at spring band clamps. The structure of the force-measurement system is described. Beyond that the necessary steps for the calibration and the documentation of the results are described. The guideline is valid for the static power measurement for the determination of the force distribution of the four concentrated loads of spring band clamps. On the basis of DIN EN ISO 7500-1, procedures are described for calibrating 4-channel force measuring devices. The guideline is valid in conjunction with DIN EN ISO 7500-1.

Measurement of mechanical quantities - Instructions for the calibration of test units for spring band hose clamps

JB/T 11206-2011 硅压阻式微型、薄型压力传感器

本标准规定了硅压阻式微型、薄型压力传感器的术语和定义、产品分类、基本参数、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于硅压阻式微型、薄型压力传感器（以下简称传感器）的生产、使用、验收等。

Silicon piezoresistive miniature and thin line pressure sensors

NF E12-021:2011 专用称量台定秤.规范和试验方法.

Weight scales for private use - Specifications and test methods.

NF E12-020:2011 身体构成分析用带生物电阻抗测量的个人体重计.规范和试验方法.

Personnal weighing scales with bio-impedance measurement for body composition analysis - Specifications and test methods.

DIN 8128-1:2011 自动分检衡器.第1部分:计量和技术要求.试验(OIML R 51-1-2006 + 勘误表 2010)

Automatic catchweighing instruments - Part 1: Metrological and technical requirements - Tests (OIML R 51-1:2006 + Erratum 2010)

ANSI/ASTM F2569:2011 体育运动用表面压力还原性能评估的试验方法

Test Method For Evaluating The Force Reduction Properties Of Surfaces For Athletic Use

GSO OIML R97:2010 大气压力测量装置

This standard specifies the metrological and technical requirements applicable to instruments for the measurement of ambient atmospheric pressure, and to the pattern evaluation. It has relevance to the following types: a) Mercury barometers having a permanent reference vacuum. b) Barometers, for example aneroid barometers, with an elastic sensing element, a permanent reference vacuum and an indication, which may be either analogue, with a pointer and a dial, or digital.

Barometers