17.200.10 热、量热学 标准查询与下载

DS/EN 1434-2:2007 热量表 第2部分：结构要求

This European Standard specifies the constructural requirements and applies to heat meters, that is to instruments intended for measur¬ing the heat which, in a heat-exchange circuit, is absorbed or given up by a liquid called the heat-conveying liquid. The heat meter indicates the quantity of heat in legal units.Electrical safety requirements are not covered by this European Standard.Pressure safety requirements are not covered by this European Standard.Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Part 2: Constructional requirements

DS/EN 1434-5:2007 热量表 第5部分：初始验证测试

This European Standard specifies initial verification tests applicable to heat meters, that is to instruments intended for measur¬ing the heat which, in a heat-exchange circuit, is absorbed or given up by a liquid called the heat-conveying liquid. The heat meter indicates the quantity of heat in legal units.Electrical safety requirements are not covered by this European Standard.Pressure safety requirements are not covered by this European Standard.Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Part 5: Initial verification tests

BS EN 1434-4:2007 量热计.模式认可试验

This European Standard specifies pattern approval tests and applies to heat meters, that is to instruments intended for measuring the heat which, in a heat-exchange circuit, is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The heat meter indicates the quantity of heat in legal units. Electrical safety requirements are not covered by this European Standard. Pressure safety requirements are not covered by this European Standard. Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Pattern approval tests

BS EN 1434-6:2007 量热计.安装、交付使用、操作监测和维修

This European Standard specifies installation, commissioning, operational monitoring and maintenance and applies to heat meters, that is to instruments intended for measuring the heat which, in a heat-exchange circuit, is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The heat meter indicates the quantity of heat in legal units. Electrical safety requirements are not covered by this European Standard. Pressure safety requirements are not covered by this European Standard. Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Installation, commissioning, operational monitoring and maintenance

BS EN 1434-1:2007 量热计.一般要求

This European Standard specifies the general requirements and applies to heat meters, that is to instruments intended for measuring the heat which, in a heat-exchange circuit, is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The heat meter indicates the quantity of heat in legal units. Electrical safety requirements are not covered by this European Standard. Pressure safety requirements are not covered by this European Standard. Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - General requirements

BS EN 1434-5:2007 量热计.初始鉴定试验

This European Standard specifies initial verification tests and applies to heat meters, that is to instruments intended for measuring the heat which, in a heat-exchange circuit, is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The heat meter indicates the quantity of heat in legal units. Electrical safety requirements are not covered by this European Standard. Pressure safety requirements are not covered by this European Standard. Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Initial verification tests

BS EN 1434-2:2007 量热计.结构要求

This European Standard specifies the constructional requirements and applies to heat meters, that is to instruments intended for measuring the heat which, in a heat-exchange circuit, is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The heat meter indicates the quantity of heat in legal units. Electrical safety requirements are not covered by this European Standard. Pressure safety requirements are not covered by this European Standard. Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Constructional requirements

DIN EN 1434-6:2007 量热计.第6部分:安装、交付使用、操作监控和维护

This European Standard specifies installation,commissioning,opeational monitoring and maintenance and applies to heat meters,that is to instruments intended for measuring the heat which,in a heat-exchange circuit,is absorbed(cooling)or given up(heating)by a liquid called the heat-conveying liquid.The heat meter indicates the quantity of heat in legal units. Electrical safety requirements are not covered by this European Standard. Presure safety requirements are not covered by this European Standard. Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance; English version of DIN EN 1434-6:2007-05

DIN EN 1434-1:2007 量热计.第1部分:一般要求

This European Standard specifies the general requirements and applies to heat meters,that is to instruments intended for measuring the heat which,in a heat-exchange circuit,is absorbed(cooling) orgiven up(heating) by a liquid called the heat-conveyingliquid.The heat meter indicates the quantity ofheat in legal units. Electrical safety requirements are not covered b this European Standard. Pressure safety requirements are not coveredby this European Standard. Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Part 1: General requirements English version of DIN EN 1434-1:2007-05

DIN EN 1434-2:2007 量热计.第2部分:结构要求

This European Standard specifies the constructional requirements and applies to heat meters,thatis toinstruments intended for measuring the heat which,in a heat-exchange circuit,is absorbed9cooling) or givenup(heating)by a liquid called the heat-conveting liquid. The heat meter indicates the quantity of heat in legalunits. Electrical safety requirements are not covered by this European Standard. Pressure safet requirements ae not covered by this European Standard. Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Part 2: Constructional requirements English version of DIN EN 1434-2:2007-05

DIN EN 1434-4:2007 量热计.第4部分:样品验收试验

This European Standard specifies pattern approval tests and applies to heat meters,that is to instruments intended for measuring the heat which,in a heat-exchange circuit,is absorbed(cooling)or given up (heating) by a liquid called the heat_conveying liquid. The heat meter indicates the quantity of heat in legalunits. Electrical safety requirements are not covered by this European Standard. Pressure safety requirements are not covered by this European Standard. Surface mounted temperature sensors are not covered by this European Standard.

Heat meters - Part 4: Pattern approval tests English version of DIN EN 1434-4:2007-05

DIN EN 1434-5:2007 量热计.第5部分:初始鉴定试验

This European Standard specifies initial verification tests and applies to heat meters,that is to instruments intended for measuring the heat which,in a heat-exchange circuit,is absorbed(cooling)or giver up(heating)by a liquid called the heat-conveying liquid.The heat meter indicates the quantity of heat in legal units. Electrical safty requirements are not covered by this European Standard. Pressure safety requirements are not covered by htis European Standard. Surface mounted temperature sensors are not covered by this European standard.

Heat meters - Part 5: Initial verification tests English version of DIN EN 1434-5:2007-05

ASTM E1461-07 用闪光法测定热扩散率的标准试验方法

Thermal diffusivity is an important property, required for such purposes under transient heat flow conditions, such as design applications, determination of safe operating temperature, process control, and quality assurance. The flash method is used to measure values of thermal diffusivity, α, of a wide range of solid materials. It is particularly advantageous because of simple specimen geometry, small specimen size requirements, rapidity of measurement and ease of handling.. Under certain strict conditions, specific heat capacity of a homogeneous isotropic opaque solid sample can be determined when the method is used in a quantitative fashion (see Appendix X2). Thermal diffusivity results, together with related values of specific heat capacity (Cp) and density (ρ) values, can be used in many cases to derive thermal conductivity (λ), according to the relationship:1.1 This test method covers the determination of the thermal diffusivity of primarily homogeneous isotropic solid materials. Thermal diffusivity values ranging from 10-7 to 10-3 m2/s are measurable by this test method from about 75 to 2800 K. 1.2 This test method is a more detailed form of Test Method C 714, having applicability to much wider ranges of materials, applications, and temperatures, with improved accuracy of measurements. 1.3 This test method is intended to allow a wide variety of apparatus designs. It is not practical in a test method of this type to establish details of construction and procedures to cover all contingencies that might offer difficulties to a person without pertinent technical knowledge, or to stop or restrict research and development for improvements in the basic technique. 1.4 This test method is applicable to the measurements performed on essentially fully dense (preferably, but low porosity would be acceptable), homogeneeous, and isotropic solid materials that are opaque to the specimen of applied energy pulse. Experience has shown, however, that some deviation from these strict guidelines can be accommodated with care and proper experimental design, substantially broadening the usefulness of the method. 1.5 This test method can be considered an absolute (or primary) method of measurement, since no reference standards are required. It is advisable to use reference materials to verify the performance of the instrument used. 1.6 The values stated in SI units are to be regarded as the standard. 1.7 For systems employing lasers as power sources, it is imperative that the safety requirement be fully met.. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Thermal Diffusivity by the Flash Method

ASTM E1952-06 通过调制温度差示扫描量热法测定热导率和热扩散系数的标准测试方法

Thermal conductivity is a useful design parameter for the rate of heat transfer through a material. The results of this test method may be used for design purposes, service evaluation, manufacturing control, research and development, and hazard evaluation. (See Practice E 1231.)1.1 This test method describes the determination of thermal determination of thermal conductivity of homogeneous, non-porous solid materials in the range of 0.10 to 1.0 W/(K m) by modulated temperature differential scanning calorimeter. This range includes many polymeric, glass, and ceramic materials. Thermal diffusivity, which is related to thermal conductivity through specific heat capacity and density, may also be derived. Thermal conductivity and diffusivity can be determined at one or more temperatures over the range of 0 to 90 C.1.2 SI units are the standard. The values given in parentheses are provided for information purposes only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

CSA C900.4-2006 热量表 第4部分：型式认可测试（第一版）

Heat meters - Part 4: Pattern approval tests (First Edition)

CSA C900.3-2006 热量表 第3部分：数据交换和接口（第一版）

Heat meters - Part 3: Data exchange and interfaces (First Edition)

CSA C900.6-2006 热量表第6部分：安装、调试、运行监控和维护（第一版）

Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance (First Edition)

CSA C900.1-2006 热量表 第1部分：一般要求（第一版）

Heat meters - Part 1: General requirements (First Edition)

JIS C 2530 AMD 1:2006 电气设备用双金属（修改件1）

箇条1.の備考1.の2行目JIS B 7411ガラス製棒状温度計(全浸没)を，JIS B 7411一般用ガラス製棒状温度計に置き換える。箇条1. の備考1.の3行目JIS B 7502外側マイクロメータを，JIS B 7502マイクロメータに置き換える。

Thermostat metals for electric apparatus (Amendment 1)

ASTM C1114-00(2006) 用薄加热器装置测定稳态热传输特性的标准试验方法

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus