17.240 辐射测量 标准查询与下载

ASTM ISO/ASTM 51649-22 能量为 300keV 至 25MeV 的电子束辐射处理的标准规范

1.1  This practice outlines dosimetric procedures to be followed in installation qualification (IQ), operational qualification (OQ) and performance qualifications (PQ), and routine processing at electron beam facilities. 1.2  The electron beam energy range covered in this practice is between 300 keV and 25 MeV, although there are some discussions for other energies. 1.3  Dosimetry is only one component of a total quality assurance program for adherence to good manufacturing practices used in radiation processing applications. Other measures besides dosimetry may be required for specific applications such as health care product sterilization and food preservation. 1.4  Specific standards exist for the radiation sterilization of health care products and the irradiation of food. For the radiation sterilization of health care products, see ISO 11137-1 (Requirements) and ISO 11137-3 (Guidance on dosimetric aspects). For irradiation of food, see ISO 14470. In those areas covered by these standards, they take precedence. Information about effective or regulatory dose limits for food products is not within the scope of this practice (see ASTM Guides F1355 , F1356 , F1736 , and F1885 ). 1.5  This document is one of a set of standards that provides recommendations for properly implementing and utilizing dosimetry in radiation processing. It is intended to be read in conjunction with ISO/ASTM 52628 , “Practice for Dosimetry in Radiation Processing”. Note 1:  For guidance in the calibration of routine dosimetry systems, see ISO/ASTM Practice 51261 . For further guidance in the use of specific dosimetry systems, see relevant ISO/ASTM Practices. For discussion of radiation dosimetry for pulsed radiation, see ICRU Report 34. 1.6  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Electron Beam Radiation Processing at Energies Between 300 keV and 25 MeV

ASTM ISO/ASTM 51607-22 丙氨酸-EPR剂量测定系统使用的标准实施规程

1.1  This practice covers dosimeter materials, instrumentation, and procedures for using the alanine-EPR dosimetry system to measure the absorbed dose in the photon or electron radiation processing of materials. The alanine system is based on electron paramagnetic resonance (EPR) spectroscopy of free radicals derived from the amino acid alanine.2 1.2  The alanine dosimeter is classified as a type I dosimeter as it is affected by individual influence quantities in a well-defined way that can be expressed in terms of independent correction factors (see ISO/ASTM Practice 52628 ). The alanine dosimeter may be used in either a reference standard dosimetry system or in a routine dosimetry system. 1.3  This document is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ISO/ASTM 52628 “Practice for Dosimetry in Radiation Processing” for alanine dosimetry system. It should be read in conjunction with ISO/ASTM 52628 . 1.4  This practice covers the use of alanine-EPR dosimetry systems under the following conditions: 1.4.1  The absorbed dose range is between 0.001 kGy and 150 kGy. 1.4.2  The absorbed dose rate is up to 1 × 102 Gy s-1 for continuous radiation fields and up to 3 × 1010 Gy s-1 for pulsed radiation fields (1- 4 ) .3 1.4.3  The radiation energy for photons and electrons is between 0.1 MeV and 30 MeV (1 , 2 , 5- 8 ) . 1.4.4  The irradiation temperature is between –78 °C and +70 °C (2 , 9- 12 ) . 1.5  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Use of an Alanine-EPR Dosimetry System

24/30490989 DC BS IEC 61874 核仪器 用于确定岩石密度的地球物理钻孔仪器（“密度测井”）

BS IEC 61874 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')

T/CMA YX059-2024 新生儿黄疸光治疗设备质量控制检测方法

本标准适用于新生儿黄疸光治疗设备的质量控制检测。 本标准规定了新生儿黄疸光治疗设备的术语和定义、基本要求、计量及其他技术要求、检测方法等。

Quality Control Test Method of Phototherapy Equipment for Neonatal Jaundice

BS EN ISO 8529-1:2023 中子参考辐射场 特点和生产方法

Neutron reference radiations fields - Characteristics and methods of production

BS EN ISO 11929-4:2023 确定电离辐射测量的特征限值（判定阈值、检测限值和覆盖间隔限值） 基础知识和应用 应用指南

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation. Fundamentals and application - Guidelines to applications

BS ISO 6980-3:2023 核能 参考 β 粒子辐射 区域和个人剂量计的校准以及确定其响应随 β 辐射能量和入射角的变化

Nuclear energy. Reference beta-particle radiation - Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence

BS ISO 6980-2:2023 核能 参考 β 粒子辐射 与表征辐射场的基本量相关的校准基础

Nuclear energy. Reference beta-particle radiation - Calibration fundamentals related to basic quantities characterizing the radiation field

BS ISO 6980-1:2023 核能 参考 β 粒子辐射 生产方法

Nuclear energy. Reference beta-particle radiation - Methods of production

T/QGCML 1992-2023 自动化核辐射测量仪

本文件规定了自动化核辐射测量仪的术语和定义、一般要求、技术要求、试验方法、检验规则、包装、运输、贮存。 本文件适用于自动化核辐射测量仪的设计和装配。

Automated nuclear radiation measuring instrument

DB34/T 4571-2023 核技术利用单位自行监测技术规范

Technical specifications for self-monitoring of nuclear technology utilization units

23/30429411 DC BS ISO 23548 放射性测量 发射阿尔法放射性核素 使用 α 光谱法的通用测试方法

BS ISO 23548 Measurement of radioactivity. Alpha emitting radionuclides. Generic test method using alpha spectrometry

IEC/CD 63465:2023 放射性核素校准器使用中的校准和质量控制

Calibration and quality control in the use of radionuclide calibrators

ISO 19238:2023 辐射防护用细胞遗传学进行生物剂量测定的服务实验室性能标准双中心测定

Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics — Dicentric assay

ISO 20956:2023 放射防护 环境和区域监测仪器的低剂量率校准

Radiological protection — Low dose rate calibration of instruments for environmental and area monitoring

BS EN ISO 23547:2023 放射性测量 伽马发射放射性核素 伽马射线能谱仪校准参考测量标准规范

Measurement of radioactivity. Gamma emitting radionuclides. Reference measurement standard specifications for the calibration of gamma-ray spectrometers

ISO/FDIS 4723:2023 水质 Actinium-227 使用 α 光谱法的测试方法

Water quality — Actinium-227 — Test method using alpha-spectrometry

ISO/FDIS 4685:2023 水质 镭 226 使用 ICP-MS 的测试方法

Water quality — Radium 226 — Test method using ICP-MS

ASTM E266-23 通过铝的放射性活化测量快中子反应速率的标准试验方法

1.1 This test method covers procedures measuring reaction rates by the activation reaction 27 Al(n,α)24 Na. 1.2 This activation reaction is useful for measuring neutrons with energies above approximately 6.5 MeV and for irradiation times up to about two days (for longer irradiations, or when there are significant variations in reactor power during the irradiation, see Practice E261). 1.3 With suitable techniques, fission-neutron fluence rates above 106 cm−2 ·s−1 can be determined. 1.4 Detailed procedures for other fast neutron detectors are referenced in Practice E261. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum

ISO 8529-3:2023 中子参考辐射场 第 3 部分：面积和个人剂量计的校准及其作为中子能量和入射角函数的响应的确定

Neutron reference radiation fields — Part 3: Calibration of area and personal dosemeters and determination of their response as a function of neutron energy and angle of incidence