21.060.40 铆钉 标准查询与下载
共找到 500 条与 铆钉 相关的标准，共 34 页
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal dia
Fasteners Part 18: Rivets Section 14: Open end blind rivets with break pull mandrel and protruding head - A2/A2
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-04-08
- 实施
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with
Fasteners Part 18: Rivets Section 16: Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-04-08
- 实施
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and an aluminium alloy mandrel (AIA) and with nominal diameters, d, from 2
Fasteners Part 18: Rivets Section 12: Open end blind rivets with break pull mandrel and protruding head - AIA/AIA
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-04-08
- 实施
この規格は，10～35℃の環境温度で実施するブラインドリべット(以下，リべットという。)の機械的試験の方法について規定し，次の試験を包含する。ーせん断試験(3.参照) 一引張試験(3.参照) ーマンドレル頭部の保持性能試験(4.参照)一装着前のマンドレルの耐プッシュアウトカ試験(5.参照) ーマンドレル破断荷重試験(6.参照》 機械的試験は，呼び径が6.4mm以下のリべットに適用する。
Blind rivets -- Mechanical testing
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-03-20
- 实施
Specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and a steel mandrel (St) and with nominal diameters, d, from 3,2 mm up to and includ
Fasteners Part 18: Rivets Section 7: Closed end blind rivets with break pull mandrel and protruding head - St/St
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-27
- 实施
Specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (Al) and an aluminium alloy mandrel (AlA) and with nominal diameter
Fasteners Part 18: Rivets Section 6: Closed end blind rivets with break pull mandrel and protruding head - AI/AIA
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-27
- 实施
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and a steel mandrel (St) and with nominal diameters, d, from 2,4 mm up to
Fasteners Part 18: Rivets Section 8: Open end blind rivets with break pull mandrel and protruding head - AIA/St
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-27
- 实施
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy (AlA) body and a steel (St) mandrel with nominal diameters, d, from 2,4 mm up to and
Fasteners Part 18: Rivets Section 9: Open end blind rivets with break pull mandrel and countersunk head - AIA/St
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-27
- 实施
Specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and countersunk head, with aluminium alloy body (AlA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and
Fasteners Part 18: Rivets Section 5: Closed end blind rivets with break pull mandrel and countersunk head - AIA/St
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-27
- 实施
Specifies the methods of mechanical testing of blind rivets including shear testing, tensile testing, mandrel head retention capability testing, mandrel push out resistance testing and mandrel break load testing.
Fasteners Part 18: Rivets Section 3: Blind rivets - Mechanical testing
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-27
- 实施
Specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to an
Fasteners Part 18: Rivets Section 4: Closed end blind rivets with break pull mandrel and protruding head - AIA/St
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-27
- 实施
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull and protruding head, with a steel body (St) and a steel mandrel (St) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm
Fasteners Part 18: Rivets Section 10: Open end blind rivets with break pull mandrel and protruding head - St/St
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-27
- 实施
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull and protruding head, with a steel body and a steel mandrel and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.
Fasteners Part 18: Rivets Section 11: Open end blind rivets with break pull mandrel and countersunk head - St/St
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-27
- 实施
uiameter of unthreided portlon Of shank shall not be lest chan min pitch dia nor
Rivet, Solid - 100 Degree Countersunk Head, Carbon Steel, Corrosion-Resistant Steel, Monel and Copper Rev 1
- ICS
- 21.060.40
- CCS
- J13
- 发布
- 2004-02-01
- 实施
Rivets - Technical delivery conditions
- ICS
- 21.060.40
- CCS
- 发布
- 2004
- 实施
Precision countersunk-head rivets with lenticular head
- ICS
- 21.060.40
- CCS
- 发布
- 2004
- 实施
Cylindrical tube rivets thin-walled - Dimensions
- ICS
- 21.060.40
- CCS
- 发布
- 2004
- 实施
Tube rivets - Dimensions
- ICS
- 21.060.40
- CCS
- 发布
- 2004
- 实施
Precision mushroom-head rivets
- ICS
- 21.060.40
- CCS
- 发布
- 2004
- 实施
