共找到 500 条与 铆钉 相关的标准,共 34 页
이 규격은 호칭 지름(d)이 3.2~6.4 mm인 오스테나이트 스테인리스강(A2) 몸체
Closed end blind rivets with pull mandrel and protruding head-A2/SSt
이 규격은 호칭 지름(d)이 2.4~6.4 mm인 알루미늄 합금(AlA) 몸체 및 알루
Open end blind rivets with break pull mandrel and protruding head-AlA/AlA
이 규격은 호칭 지름(d)이 2.4~6.4 mm인 알루미늄 합금(AlA) 몸체 및 알루
Open end blind rivets with break pull mandrel and countersunk head-AlA/AlA
Open end blind rivets with break pull mandrel and protruding head-AlA/St
Open end blind rivets with break pull mandrel and protruding head-St/St
Open end blind rivets with break pull mandrel and countersunk head-St/St
이 규격은 호칭 지름(d)이 2.4~6.4 mm인 강제(St) 몸체 및 강제(St) 맨
Open end blind rivets with break pull mandrel and countersunk head-St/St
이 규격은 호칭 지름(d)이 2.4~6.4 mm인 알루미늄 합금(AlA) 리벳 몸체 및
Open end blind rivets with break pull mandrel and protruding head-AlA/St
이 규격은 호칭 지름(d)이 2.4~5 mm인 알루미늄 합금(AlA) 몸체 및 강제(S
Open end blind rivets with break pull mandrel and countersunk head-AlA/St
이 규격은 호칭 지름(d)이 2.4~6.4 mm인 강제(St) 몸체 및 강제(St) 맨
Open end blind rivets with break pull mandrel and protruding head-St/St
Open end blind rivets with break pull mandrel and countersunk head-AlA/St
Shear single teeth titanium alloy lockbolts--Part 2:Pan head lockbolts
Shear single teeth titanium alloy lockbolts--Part 3:120°Countsunk head lockbolts
Shear single teeth titanium alloy lockbolts--Part 1:General specification
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal
Fasteners Part 18: Rivets Section 15: Open end blind rivets with break pull mandrel and countersunk head - A2/A2
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and an aluminium alloy mandrel (AIA) and with nominal diameters, d, from 2
Fasteners Part 18: Rivets Section 12: Open end blind rivets with break pull mandrel and protruding head - AIA/AIA
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body (AIA) and an aluminium alloy mandrel (AIA) and with nominal diameters, d, from
Fasteners Part 18: Rivets Section 13: Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA
Specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with
Fasteners Part 18: Rivets Section 17: Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt
Specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) and a stainless steel mandrel (SSt) and with nominal diameters
Fasteners Part 18: Rivets Section 19: Closed end blind rivets with pull mandrel and protruding head - A2/SSt
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号