23.020.10 固定容器和罐 标准查询与下载
共找到 599 条与 固定容器和罐 相关的标准，共 40 页
Specifications for Supervision and Inspection of Manufacturing High Pressure Gas Underground Gas Storage Wells
- ICS
- 23.020.10
- CCS
- J 74
- 发布
- 2014-12-30
- 实施
- 2015-03-01
Specifications for Periodic Inspection of High Pressure Gas Underground Gas Storage Wells
- ICS
- 23.020.10
- CCS
- J 74
- 发布
- 2014-12-30
- 实施
- 2015-03-01
This standard specifies the requirements for rectangular and vertical cylindrical glass reinforced plastics (GRP) one-piece tank and rectangular sectional tanks for the storage of potable water above ground for domestic use.
Technical Specifications & Requirements for cylindrical & rectangular GRP water tanks
- ICS
- 23.020.10
- CCS
- 发布
- 2014-12-25
- 实施
本标准规定了生物质成型燃料工业锅炉的定义、型号编制方法、技术要求、试验方法、检验规则、标志和随机文件、安装及使用要求、质量责任。 本标准适用于额定蒸汽压力大于0.04MPa，但小于3.8MPa且额定蒸发量不小于0.1t/h以水为介质的固定式钢制蒸汽锅炉和额定出水压力不小于0.1MPa（表压）且额定热功率不小于0.1MW的固定式钢制热水锅炉。 本标准适用于使用符合DB44/T 1052《工业锅炉用生物质成型燃料》的生物质成型燃料工业锅炉。
Technical conditions for biomass briquette fuel industrial boilers
- ICS
- 23.020.10
- CCS
- J74
- 发布
- 2014-12-09
- 实施
- 2015-03-09
This Singapore Standard specifies the requirements for glass reinforced polyester (GRP) sectional tanks, with nominal capacity of at least 500 litres for above ground storage of water.
Specification for glass reinforced polyester sectional water tanks
- ICS
- 23.020.10
- CCS
- 发布
- 2014-12-04
- 实施
Specifications for periodic inspection of atmospheric vertical storage tanks
- ICS
- 23.020.10
- CCS
- A 82
- 发布
- 2014-10-12
- 实施
- 2014-11-10
1.1 This specification defines the minimum requirements for the manufacture of Fiberglass-Reinforced Plastic (FRP) storage tanks. The requirements are in addition to and supplement the requirements of ASME RTP-1 “Reinforced Thermoset Plastic Corrosion Resistant Equipment”. 1.2 This specification covers cylindrical tanks having internal or external pressure not exceeding 103 KPa (15 psi) and used in process plants (onshore and offshore), bulk plants, building services, fuel dispensing, and community facilities for the storage of the following services: a) Water. b) Oily water. c) Combustible products (Hydrocarbons, Alcohols, Alcohol-Gasoline Mixtures). d) Flammable liquids. e) Chemicals.
Petroleum and natural gas industries – Manufacture of FRP Storage Tanks
- ICS
- 23.020.10
- CCS
- 发布
- 2014-08-06
- 实施
1.1 本标准规定了金属制卧式容器(以下简称容器)的设计、制造、检验和验收等要求。1.2 本标准适用的设计压力1.2.1 钢制容器设计压力不大于35MPa。1.2.2 其他金属材料制容器按相应引用标准的规定。1.3 本标准适用的设计温度范围1.3.1 设计温度范围:-269℃~900℃。1.3.2 容器的设计温度按本标准相应引用标准中列入材料的允许使用温度确定。1.4 本标准适用的结构形式1.4.1 承受均布载荷和附加载荷的双鞍座支承的卧式容器。1.4.2 承受均布载荷的对称布置的三鞍座支承的卧式容器。1.4.3 本标准适用范围内的特定结构容器以及铝、钛、铜、镍及镍合金、锆制容器,其结构形式和适用范围还应满足下述标准的相应要求:a) JB/T 4734《铝制焊接容器》;b) JB/T 4745《钛制焊接容器》;c) JB/T 4755《铜制压力容器》;d) JB/T 4756《镍及镍合金制压力容器》;e) NB/T 47011《锆制压力容器》。1.5 不适用本标准的容器1.5.1 《移动式压力容器安全技术监察规程》管辖的容器。1.5.2 核能装置中存在中子辐射损伤失效风险的容器。1.5.3 直接火焰加热的容器。1.5.4 搪玻璃容器和制冷空调行业中另有国家标准或行业标准的容器。1.5.5 带夹套的容器。1.6 容器界定范围1.6.1 容器与外部管道连接:a) 焊接连接的第一道环向接头坡口端面;b) 螺纹连接的第一个螺纹接头端面;c) 法兰连接的第一个法兰密封面;d) 专用连接件或管件连接的第一个密封面。1.6
Horizontal vessels on saddle supports
- ICS
- 23.020.10
- CCS
- J74
- 发布
- 2014-06-29
- 实施
- 2014-11-01
1.1 本标准规定了金属制塔式容器的设计、制造、检验与验收等要求。1.2 本标准适用范围如下:a) 钢制塔式容器设计压力不大于35MPa,其他金属材料制塔式容器设计压力按相关标准规定;b) 设计温度范围按金属材料允许的使用温度范围;c) 高度H与平均直径D之比大于5的裙座自支承金属制塔式容器。1.3 对于高度H与平均直径D之比小于等于5的裙座自支承金属制塔式容器,可以参照附录E设计。1.4 本标准不适用于下列塔式容器:a) 带有拉牵装置的塔式容器;b) 由操作平台联成一体的排塔或塔群;c) 带有夹套的塔式容器;d) 铸铁和非金属制塔式容器。
Vertical vessels supported by skirt
- ICS
- 23.020.10
- CCS
- J74
- 发布
- 2014-06-29
- 实施
- 2014-11-01
Calculations for tanks and equipment made of thermoplastics Example of a standing circular non-pressurized tank with a parallel supported sloping bottom
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
Calculation of tanks and equipment made of thermoplastics Vertical circular non-pressurized tank ring support cone bottom example
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
Calculated property values for containers and equipment made of thermoplastics
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
Calculation of storage tanks and equipment made of thermoplastics Vertical round non-pressurized storage tanks Vertical frame storage tanks in seismic zones
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
Calculation of storage tanks and equipment made of thermoplastic plastics Vertical round non-pressurized storage tanks with flat roofs
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
Calculation of vertical circular non-pressurized tank shell structures for tanks and equipment made of thermoplastics
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
Calculation of storage tanks and equipment made of thermoplastic plastics Vertical circular atmospheric storage tanks with truncated ring cone bottoms
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
Calculation of storage tanks and equipment made of thermoplastic plastics Vertical, round, parallel-supported inclined bottoms of atmospheric storage tanks
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
Calculation of storage tanks and equipment made of thermoplastic plastic Vertical circular atmospheric storage tanks
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
Calculation of tanks and equipment made of thermoplastics Vertical, round, atmospheric tanks Flat-bottomed tanks in seismic zones
- ICS
- 23.020.10
- CCS
- 发布
- 2014-02
- 实施
