25.040.20 数控机床 标准查询与下载

BS ISO 23704-3:2023 网络物理控制智能机床系统 (CPSMT) 的一般要求 用于增材制造的 CPSMT 参考架构

1   Scope This document specifies a reference architecture of cyber-physically controlled smart machine tool systems ( CPSMT ) for additive manufacturing ( AM ) based on the reference architecture of CPSMT as provided in ISO 23704‑1 and the requirements for cyber-physically controlled smart additive manufacturing system . The reference architecture of a CPSMT for AM includes: — the technical requirements for the smart additive manufacturing system ( SAMS ), — the reference architecture of the cyber-physically controlled machine tools ( CPCM ) for AM , — the reference architecture of the cyber-supporting system for machine tools ( CSSM ) for AM , and — the interface view of the CPSMT for AM . This document also provides: — stakeholder requirements for the SAMS ,

General requirements for cyber-physically controlled smart machine tool systems (CPSMT) - Reference architecture of CPSMT for additive manufacturing

BS ISO 14649-14:2013 自动化系统和集成 物理设备控制 计算机数值控制器的数据模型 水槽放电加工 (sink-EDM) 的过程数据

1   Scope This part of ISO 14649 specifies the technology-specific data element needed as process data for sink-EDM. Together with the general process data described in ISO 14649‑10, it describes the interface between computerized numerical controller and the programming system (i.e. CAM system or shop-floor programming system) for sink-EDM. It can be used for sink-EDM operations on this kind of machine. The scope of this part of ISO 14649 does not include tools for any other technologies (e.g. turning, grinding). Tools for these technologies are described in other parts of ISO 14649.

Automation systems and integration. Physical device control. Data model for computerized numerical controllers - Process data for sink electrical discharge machining (sink-EDM)

BS ISO 14649-13:2013 自动化系统和集成 物理设备控制 计算机数值控制器的数据模型 电火花线切割加工（线切割放电加工）的过程数据

1   Scope This part of ISO 14649 specifies the technology-specific data element needed as process data for wire-EDM. Together with the general process data described in ISO 14649‑10, it describes the interface between computerized numerical controller and the programming system (i.e. CAM system or shop-floor programming system) for wire-EDM. It can be used for wire-EDM operations on this kind of machine. The scope of this part of ISO 14649 does not include tools for any other technologies (e.g. turning, grinding). Tools for these technologies are described in other parts of ISO 14649.

Automation systems and integration. Physical device control. Data model for computerized numerical controllers - Process data for wire electrical discharge machining (wire-EDM)

BS ISO 10303-24:2001 工业自动化系统及集成 产品数据表示和交换 实现方法 标准数据访问接口的C语言绑定

1   Scope This part of ISO 10303 specifies a C programming language late binding of the capability specified in ISO 10303‑22 - Standard data access interface ( SDAI ). This binding is a late binding and as such, none of the constants, data types, and functions depend on the application schema being accessed. The following are within the scope of this part of ISO 10303: — access to and manipulation of data types and entities which are specified in ISO 10303‑22; — convenience functions suitable to this language binding; — late binding requirements specified in ISO 10303‑22. The following are outside the scope of this part of ISO 10303: — memory arrangement of data structures used by implementations of this part of ISO 10303; — early binding requirements as specified in ISO 10303‑22; — all items listed as out of scope in ISO 10303‑22.

Industrial automation systems and integration. Product data representation and exchange - Implementation methods. C language binding of standard data access interface

T/CAMS 150-2023 重型卧式车床 型式与参数

本标准规定了重型卧式车床的型式与参数。

Heavy duty horizintal lathes ——Type and parameters

T/CAMS 149-2023 数控重型曲轴旋风车床 型式与参数

本标准规定了数控重型曲轴旋风车床的型式与参数。

NC heavy duty crankshaft whilewind lathes —Type and parameters

BS ISO 14649-111:2010 工业自动化系统及集成 物理设备控制 计算机数值控制器的数据模型 铣床刀具

1   Scope This part of ISO 14649 specifies the data elements describing cutting tool data for milling machine tools and machining centres, which work together with the process data for milling machine tools and machining centres specified in ISO 14649‑11. They can be used as criteria for selecting one of several operations; they do not describe complete information on a particular tool. Therefore, leaving out optional attributes gives the controller more freedom to select from a larger set of tools. NOTE 1 The numerical control (NC) is assumed to have access to complete description of specific tools in a database. The milling_machine_tool_schema defined in this part of ISO 14649 serves as a basic tool schema, including the information required by the CNC to select a tool from the machine tool's tool magazine. NOTE 2 In ISO 6983, the tool is defined by its identifier (e.g. “T8”). No further information concerning the tool type or geometry is given. This information is part of the tool set-up sheet, which is supplied with the NC program to the machine. The tool set-up sheet gives the relationship between the tool location (e.g. “slot 8 of the tool magazine”) and the type of tool (e.g. “drill 4 mm”). This part of ISO 14649 also specifies the information to be provided in the tool set-up sheet: — tool identifier; —

Industrial automation systems and integration. Physical device control. Data model for computerized numerical controllers - Tools for milling machines

ISO 23704-3:2023 网络物理控制智能机床系统（CPSMT）的一般要求.第3部分：增材制造用CPSMT的参考体系结构

This document specifies a reference architecture of cyber-physically controlled smart machine tool systems (CPSMT) for additive manufacturing (AM) based on the reference architecture of CPSMT as provided in ISO 23704-1 and the requirements for cyber-physically controlled smart additive manufacturing system. The reference architecture of a CPSMT for AM includes: — the technical requirements for the smart additive manufacturing system (SAMS), — the reference architecture of the cyber-physically controlled machine tools (CPCM) for AM, — the reference architecture of the cyber-supporting system for machine tools (CSSM) for AM, and — the interface view of the CPSMT for AM. This document also provides: — stakeholder requirements for the SAMS, — the concept of the digital thread, — types of abnormality in AM, and — use cases of reference architecture of a CPSMT for AM. This document does not specify physical or implementation architecture.

General requirements for cyber-physically controlled smart machine tool systems (CPSMT) — Part 3: Reference architecture of CPSMT for additive manufacturing

T/GDBX 069-2023 整体式矿物铸件数控卧式车床

本文件规定了整体式矿物铸件数控卧式车床的技术要求、试验方法、检验规则、标志、随机技术文件、包装、运输及贮存。 本文件适用于一般用途精密级以上，床身上最大回转直径至1000 mm、线性轴线行程至2000 mm的整体式矿物铸件数控卧式车床（以下简称为“车床”）。

Integral mineral casting numerically controlled horizontal turning machines

BS EN ISO 17295:2023 添加剂制造 一般原则 零件定位、坐标和方向

1   Scope This document provides specifications and illustrations for the positioning and orientation of parts with regards with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize the method of representation used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Included specifications cover coordinate systems and the location and orientation of parts. It is intended to be in accordance with the principles of ISO 841 and to clarify the specific adaptation of those principles for additive manufacturing.

Additive manufacturing. General principles. Part positioning, coordinates and orientation

KS B ISO 13041-6-2022 数控车削机床和车削中心的试验条件.第6部分:成品试件的精度

Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece

KS B ISO 13041-7-2022 数控车削机床和车削中心的试验条件.第7部分:坐标平面内仿形性能的评定

Test conditions for numerically controlled turning machines and turning centres — Part 7: Evaluation of contouring performance in the coordinate planes

KS B ISO 13041-8-2022 数控车削机床和车削中心的试验条件.第8部分:热变形的评定

Test conditions for numerically controlled turning machines and turning centres — Part 8: Evaluation of thermal distortions

KS B ISO 13041-3-2022 数控车削机床和车削中心的试验条件.第3部分:带倒立式工件夹持主轴的机床的几何试验

Test conditions for numerically controlled turning machines and turning centres — Part 3: Geometric tests for machines with inverted vertical workholding spindles

KS B ISO 13041-4-2022 数控车削机床和车削中心的试验条件.第4部分:直线轴和旋转轴定位的精度和重复性

Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes

T/CAMER 016-2022 数控双主轴立式车床 线性轴线定位精度和重复定位精度检验

规定了数控双主轴立式车床制造与大修的线性轴线定位精度和重复定位精度检验的公差。适用于数控双主轴立式车床制造与大修的线性轴线行程至 2000mm 的位置精度检验。 线性轴线的位置精度: 公差、检验工具、检验方法; 记录的内容：辨别机床的信息、辨别检验的信息、检验条件的信息。

Test of accuracy of positioning and repeatability of linear axes for vertical twin-spindle CNC lathe

T/CASME 154-2022 对向双主轴双刀塔车铣复合车床

本文件规定了对向双主轴双刀塔车铣复合车床的术语和定义、技术要求、试验方法、检验规则、标志、随机文件、包装、运输和贮存。

Counter spindle double turret turning milling compound lathe

T/ZZB 2899-2022 自动数控双直驱卧式滚齿机

本文件规定了自动数控双直驱卧式滚齿机的基本要求、产品结构和基本参数、技术要求、试验方法、检验规则、标志、随机文件及备件、包装、运输、贮存和质量承诺。 本文件适用于最大加工模数3 mm、最大加工工件直径120 mm，采用桁架式自动上下料机构的数控双直驱卧式滚齿机（以下简称“机床”）。

Automatic numerically controlled double direct drive horizontal hobbing machines

T/ZZB 2824-2022 面曝光光固化3D打印机

本文件规定了面曝光光固化3D打印机的基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量承诺等要求。 本文件适用于采用数字光处理或图像掩码技术的面曝光光固化3D打印机。

Photopolymerization 3D printer based on surface exposure

T/ZZB 0295-2022 高速精密数控雕铣机

本文件规定了高速精密数控雕铣机的术语和定义、基本要求、技术要求、检验方法、检验规则、标 志、随机文件、包装、贮存、运输和质量承诺。 本文件适用于线性轴线行程≤2 000 mm高速精密数控雕铣机（以下简称产品）。

High speed precision CNC engraving and milling machine