25.040.20 数控机床 标准查询与下载

T/CASME 630-2023 不锈钢杯/壶口部数控激光焊接机

本文件规定了不锈钢杯/壶口部数控激光焊接机的术语和定义、使用条件、技术要求、试验方法、检验规则、标志、包装、运输及贮存。

Stainless steel cup / pot CNC laser welding machine

T/CIET 155-2023 智能数控机床装备评价导则

本文件规定了智能数控机床装备评价的术语和定义、评价原则、评价指标体系、评价方法、评价程序、评价要求、评价结论和报告、评价结论验证等。 本文件适用于智能数控机床装备的评价。

Evaluation Guidelines for Intelligent CNC Machine Tool Equipment

T/ZPP 009-2023 组合式数控机床

本文件规定了组合式数控机床的术语和定义、基本参数、精度、技术要求、试验方法、检验规则、标志、包装、运输和贮存要求。 本文件适用于组合式数控机床。

Combined CNC machine tool

BS ISO 14649-10:2004 工业自动化系统及集成 物理设备控制 计算机数值控制器的数据模型 一般过程数据

1   Scope This part of ISO 14649 specifies the process data which is generally needed for NC-programming within all machining technologies. These data elements describe the interface between a computerised numerical controller and the programming system (i.e. CAM system or shop-floor programming system). On the programming system, the programme for the numerical controller is created. This programme includes geometric and technological information. It can be described using this part of ISO 14649 together with the technology-specific parts (ISO 14649‑11, etc.). This part of ISO 14649 provides the control structures for the sequence of programme execution, mainly the sequence of working steps and associated machine functions. The "machining_schema" defined in this part of ISO 14649 contains the definition of data types which are generally relevant for different technologies (e.g. milling, turning, grinding). The features for non-milling technologies like turning, EDM , etc. will be introduced when the technology specific parts like ISO 14649‑12 for turning, ISO 14649‑13 for EDM , and ISO 14649‑14 for contour cutting of wood and glass are published. It includes the definition of the workpiece, a feature catalogue containing features which might be referenced by several technologies, the general executables and the basis for an operation definition. Not included in this schema are geometric items and representations, which are referenced from ISO 10303's generic resources, and the technology-specific definitions, which are defined in separate parts of ISO 14649. This part...

Industrial automation systems and integration. Physical device control. Data model for computerized numerical controllers - General process data

T/WLJC 117-2023 数控机床桁架一脑双控

本标准规定了数控机床桁架的一脑双控桁架技术要求、主界面显示、程序编辑、模式与状态、报警信息、按键控制、坐标系、自动编程、矩阵式料盘、保护等要求。 本标准适用于数控机床桁架一脑双控系统开发。

truss-brain double control of NC machine tools

T/CMTBA 1014-2023 用于数控系统的光栅传感器通信协议（NCEC）规范

    本文件规定了用于数控系统光栅传感器通信协议（简称NCEC）的传输方式、物理特性、数据格式、工作模式、域结构、参数说明、寄存器映射、通信异常响应和数据帧时序。     本文件适用于光栅传感器（包括光栅线位移传感器和光栅角位移传感器，以下简称传感器）在数控系统中的双向串行通信。

Protocol specification for electro-optical sensor communication of numerical control system（NCEC）

T/WLJC 97-2023 万能工具磨床

本标准规定了万能工具磨床的型式与参数、技术条件、精度检验、标志、包装、运输和储存。 本标准适用于金属切削刀具修磨的万能工具磨床。尤其适用于刃磨各种中小型工具，如铰刀、丝锥、麻花钻头、扩孔钻头、各种铣刀、铣刀头、插齿刀。

Universal tool and cutter grinder

T/WLJC 98-2023 攻丝机

本标准规定了攻丝机的型式与参数、技术条件、精度检验、标志、包装、运输和储存。 本标准适用于气动或电动的攻丝机。

Tapping machine

T/WLJC 96-2023 万能磨刀机

本标准规定了万能磨刀机的型式与参数、技术条件、精度检验、标志、包装、运输和储存。 本标准适用于金属切削刀具修磨的万能磨刀机。

Universal Cutter Grinder

T/WLJC 99-2023 车床伺服刀塔技术规范

本标准规定了车床伺服刀塔技术条件、精度检验、附件和包装的要求。 本标准适用于车床伺服刀塔生产制造。

Lathe servo turret of technical specification

T/WLJC 95-2023 倒角机

本标准规定了倒角机的型式与参数、技术条件、精度检验、标志、包装、运输和储存。 本标准适用于金属切削或磨削的倒角机。

Chamfering machine

ISO/CD 14649-3 工业自动化系统和集成“物理设备控制”计算机数字控制器的数据模型“第3部分：制造特征

Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 3: Manufacturing features

ISO/CD 14649-2 工业自动化系统和集成“物理设备控制”计算机数字控制器的数据模型“第2部分：一般过程数据

Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 2: General process data

ISO/CD 14649-5 工业自动化系统和集成“物理设备控制”计算机数字控制器的数据模型“第5部分：切削操作工具

Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 5: Tools for cutting operations

ISO/CD 14649-4 工业自动化系统与集成《物理设备控制》《计算机数字控制器的数据模型》《第4部分：切割过程数据》

Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 4: Process data for cutting

BS ISO 14649-121:2005 工业自动化系统及集成 物理设备控制 计算机数值控制器的数据模型 车床刀具

1   Scope This part of ISO 14649 specifies the data elements describing cutting tool data for turning machine tools and machining centres. They work together with ISO 14649‑12, the process data for turning machine tools and machining centres. These data elements can be used as criteria to select one of several operations; they do not describe a complete information of a particular tool. Thus, leaving out optional attributes gives the controller more freedom to select from a larger set of tools. NOTE 1 The NC is assumed to have access to complete description of specific tools in a database. The turning_machine_tool_schema defined in this part of ISO 14649 serves as a basic tool schema including the information required by the CNC to select a tool from the machine tool's tool turret. NOTE 2 In ISO 6983, the tool is defined by its identifier (e.g. T8). No further information concerning the tool type or geometry is given. This information is part of the tool set-up sheet, which is supplied with the NC-program to the machine. The tool set-up sheet gives the relationship between the tool location (e.g. the slot 8 of the tool magazine) and the type of tool (e.g. "drill 4 mm"). This part of ISO 14649 includes the information which is contained in the tool set-up sheet: • tool identifier; • tool type; ...

Industrial automation systems and integration. Physical device control. Data model for computerized numerical controllers - Tools for turning machines

BS ISO 14649-14:2013 自动化系统和集成 物理设备控制 计算机数值控制器的数据模型 水槽放电加工 (sink-EDM) 的过程数据

1   Scope This part of ISO 14649 specifies the technology-specific data element needed as process data for sink-EDM. Together with the general process data described in ISO 14649‑10, it describes the interface between computerized numerical controller and the programming system (i.e. CAM system or shop-floor programming system) for sink-EDM. It can be used for sink-EDM operations on this kind of machine. The scope of this part of ISO 14649 does not include tools for any other technologies (e.g. turning, grinding). Tools for these technologies are described in other parts of ISO 14649.

Automation systems and integration. Physical device control. Data model for computerized numerical controllers - Process data for sink electrical discharge machining (sink-EDM)

BS ISO 14649-11:2004 工业自动化系统及集成 物理设备控制 计算机数值控制器的数据模型 铣削过程数据

1 Scope This part of ISO 14649 specifies the technology-specific data elements needed as process data for milling. Together with the general process data described in ISO 14649‑10, it describes the interface between a computerised numerical controller and the programming system (i.e. CAM system or shop floor programming system) for milling. It can be used for milling operations on all types of machines, be it milling machines, machining centers, or lathes with motorised tools capable of milling. The scope of this part does not include any other technologies, like turning, grinding, or EDM. These technologies will be described in further parts of ISO 14649. The subject of the milling_schema, which is described in this part of ISO 14649, is the definition of technologyspecific data types representing the machining process for milling and drilling. This includes both milling of freeform surfaces as well as milling of prismatic workpieces (also known as 2½D-milling). Not included in this schema are geometric items, representations, manufacturing features, executable objects, and base classes which are common for all technologies. They are referenced from ISO 10303's generic resources and ISO 14649‑10. The description of process data is done using the EXPRESS language as defined in ISO 10303‑11. The encoding of the data is done using ISO 10303‑21.

Industrial automation systems and integration. Physical device control. Data model for computerized numerical controllers - Process data for milling

BS ISO 10303-24:2001 工业自动化系统及集成 产品数据表示和交换 实现方法 标准数据访问接口的C语言绑定

1   Scope This part of ISO 10303 specifies a C programming language late binding of the capability specified in ISO 10303‑22 - Standard data access interface ( SDAI ). This binding is a late binding and as such, none of the constants, data types, and functions depend on the application schema being accessed. The following are within the scope of this part of ISO 10303: — access to and manipulation of data types and entities which are specified in ISO 10303‑22; — convenience functions suitable to this language binding; — late binding requirements specified in ISO 10303‑22. The following are outside the scope of this part of ISO 10303: — memory arrangement of data structures used by implementations of this part of ISO 10303; — early binding requirements as specified in ISO 10303‑22; — all items listed as out of scope in ISO 10303‑22.

Industrial automation systems and integration. Product data representation and exchange - Implementation methods. C language binding of standard data access interface

BS ISO 14649-13:2013 自动化系统和集成 物理设备控制 计算机数值控制器的数据模型 电火花线切割加工（线切割放电加工）的过程数据

1   Scope This part of ISO 14649 specifies the technology-specific data element needed as process data for wire-EDM. Together with the general process data described in ISO 14649‑10, it describes the interface between computerized numerical controller and the programming system (i.e. CAM system or shop-floor programming system) for wire-EDM. It can be used for wire-EDM operations on this kind of machine. The scope of this part of ISO 14649 does not include tools for any other technologies (e.g. turning, grinding). Tools for these technologies are described in other parts of ISO 14649.

Automation systems and integration. Physical device control. Data model for computerized numerical controllers - Process data for wire electrical discharge machining (wire-EDM)