25.040.20 数控机床 标准查询与下载

T/GDMES 0035-2022 锂电池极耳激光切割机

本文件规定了采用铜箔、铝箔材料作为极耳的锂电池极耳激光切割机的术语和定义、分类、技术要求、试验方法、检验规则、标识、包装、运输和贮存等。

Lithium battery tab laser cutting machine

T/GDMES 0036-2022 高效光伏电池激光掺杂设备

本文件规定了高效光伏电池激光掺杂设备的术语和定义、技术要求、参数、检验方法、检验规则、包装、运输、储存等方面的要求。

High efficiency photovoltaic cell laser doping equipment

BS ISO 23218-2:2022 工业自动化系统及集成 机床数控系统 数控系统集成要求

1   Scope This document specifies requirements for the integration of numerical control systems ( NC systems ). It consists of technical and inspection requirements and test methods. This document is applicable to all machine tools using NC systems not already covered by class C standards (including metal cutting machine tools, metal forming machine tools and woodworking machine tools) and for partial assemblies of machine tools (including cabinets and auxiliary devices) intended to be integrated into machine tools. It is also applicable to other production equipment using NC systems . NOTE NC system integration with machine tools is performed mainly by machine tool builders using an NC system to control their machine tools, system integrators by assembling machine tools with the NC system to a production line, and machine tool users by upgrading their existing equipment.

Industrial automation systems and integration. Numerical control systems for machine tools - Requirements for numerical control system integration

T/HEBQIA 097-2022 辊面电火花毛化设备

本文件规定了辊面电火花毛化设备的名称、结构、要求、安全防护、试验、检验规则、标志、包装、搬运、运输和贮存。

Roll surface EDM texturing equipment

ISO 23218-2:2022 工业自动化系统和集成.机床数控系统.第2部分:数控系统集成的要求

This document specifies requirements for the integration of numerical control s ystems (NC s ys tems) . It consists of technical and inspection requirements and test methods . This document is applicable to all machine tools using NC s ys tems not already covered by class C standards (including metal cutting machine tools, metal forming machine tools and woodworking machine tools) and for partial assemblies of machine tools (including cabinets and auxiliary devices) intended to be integrated into machine tools. It is also applicable to other production equipment using NC s ys tems . NO TE NC s ys tem integration with machine tools is performed mainly by machine tool builders using an NC s ys tem to control their machine tools, s ys tem integrators by assembling machine tools with the NC s ys tem to a production line, and machine tool users by upgrading their exis ting equipment.

Industrial automation systems and integration — Numerical control systems for machine tools — Part 2: Requirements for numerical control system integration

T/ZS 0303-2022 刀塔式钻攻数控机床

前言　 1  范围　 2  规范性引用文件　 3  术语和定义　 4  结构、型号及基本参数　 5  要求　 6  试验方法　 7  检验规则　 8  标志、包装、运输、贮存　

CNC machine for turret drilling and tapping

T/CASMES 86-2022 数控机床用 130 五对极交流伺服电动机

本文件规定了数控机床用130五对极交流伺服电动机（以下简称“电动机”）的型号命名、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于数控机床用130五对极交流伺服电动机。

CNC machine tools with 130 five-pole AC servo motors

T/CAMS 105.2-2022 多轴联动数控缠绕机床 第2部分：技术条件

本部分共分为范围、规范性引用文件、术语和定义、技术要求、安全卫生、加工和装配质量、机床空运转试验、机床负荷试验、机床精度检验及性能测试、原点返回试验、最小设定单元试验、及机床标志、包装、运输和贮存共十二章。

Multi-axis numerically controlled winding machinePart 2：Specification

T/CAMS 105.1-2022 多轴联动数控缠绕机床 第1部分：精度检验

本文件共分为范围、规范性引用文件、术语和定义、机床型式及坐标轴、一般要求、几何精度检验、数控轴线定位精度和重复定位精度及机床工作精度检验八章。

Multi-axis numerically controlled winding machinePart 1：Testing of the accuracy

BS ISO 23218-1:2022 工业自动化系统及集成 机床数控系统 数控系统要求

1   Scope This document specifies general requirements for the design and manufacturing of numerical control systems (NC systems) for machine tools. It consists of technical and inspection requirements and test methods. This document is applicable to NC systems used in machine tools (including metal cutting machine tools, metal forming machine tools and woodworking machine tools) and to partial assemblies of machine tools (including cabinets and auxiliary devices) intended to be integrated into machine tools. It is also applicable to other production equipment using NC systems.

Industrial automation systems and integration. Numerical control systems for machine tools - Requirements for numerical control systems

BS ISO 23704-1:2022 网络物理控制智能机床系统（CPSMT）的一般要求 概述和基本原则

1   Scope This document specifies the concept and fundamental principles of cyber-physically controlled smart machine tool systems ( CPSMT ) and requirements, including — the reference architecture of a CPSMT , — the key components and interfaces which together make up the reference architecture of a CPSMT , and — the capabilities of a CPSMT . This document also provides: — the background for a CPSMT , — the concept of a shop floor device system ( SFDS ), and — example use cases of the reference architecture of a CPSMT . This document does not specify physical or implementation architecture.

General requirements for cyber-physically controlled smart machine tool systems (CPSMT) - Overview and fundamental principles

BS ISO 23704-2:2022 网络物理控制智能机床系统（CPSMT）的一般要求 减材制造的 CPSMT 参考架构

1   Scope This document specifies a reference architecture of cyber-physically controlled smart machine tool systems ( CPSMT ) for subtractive manufacturing based on the reference architecture of a CPSMT as provided in ISO 23704‑1. The reference architecture of a CPSMT for subtractive manufacturing includes: — the reference architecture of a cyber-physically controlled machine tool ( CPCM ), — the reference architecture of a cyber-supporting system for machine tools ( CSSM ), and — the interface architecture of a CPSMT . This document also provides: — a conceptual description of a shop floor device system ( SFDS ), — a conceptual description of a shop floor control system ( SFCS ), — a conceptual description of a unified interface system ( UIS ), and — example use cases of a reference architect...

General requirements for cyber-physically controlled smart machine tool systems (CPSMT) - Reference architecture of CPSMT for subtractive manufacturing

ISO 23704-2:2022 网络物理控制智能机床系统（CPSMT）的一般要求第2部分:减法制造用CPSMT的参考体系结构

This document specifies a reference architecture of cyber-physically controlled smart machine tool systems (CPSMT) for subtractive manufacturing based on the reference architecture of a CPSMT as provided in ISO 23704-1. The reference architecture of a CPSMT for subtractive manufacturing includes: — the reference architecture of a cyber-physically controlled machine tool (CPCM), — the reference architecture of a cyber-supporting system for machine tools (CSSM), and — the interface architecture of a CPSMT. This document also provides: — a conceptual description of a shop floor device system (SFDS), — a conceptual description of a shop floor control system (SFCS), — a conceptual description of a unified interface system (UIS), and — example use cases of a reference architecture of a CPSMT for subtractive manufacturing. This document does not specify physical or implementation architecture.

General requirements for cyber-physically controlled smart machine tool systems (CPSMT) — Part 2: Reference architecture of CPSMT for subtractive manufacturing

ISO 23704-1:2022 网络物理控制智能机床系统（CPSMT）的一般要求第1部分:概述和基本原则

This document specifies the concept and fundamental principles of cyber-physically controlled smart machine tool systems (CPSMT) and requirements, including — the reference architecture of a CPSMT, — the key components and interfaces which together make up the reference architecture of a CPSMT, and — the capabilities of a CPSMT. This document also provides: — the background for a CPSMT, — the concept of a shop floor device system (SFDS), and — example use cases of the reference architecture of a CPSMT. This document does not specify physical or implementation architecture.

General requirements for cyber-physically controlled smart machine tool systems (CPSMT) — Part 1: Overview and fundamental principles

ISO 23218-1:2022 工业自动化系统和集成机床数控系统第1部分:数控系统的要求

This document specifies general requirements for the design and manufacturing of numerical control systems (NC systems) for machine tools. It consists of technical and inspection requirements and test methods. This document is applicable to NC systems used in machine tools (including metal cutting machine tools, metal forming machine tools and woodworking machine tools) and to partial assemblies of machine tools (including cabinets and auxiliary devices) intended to be integrated into machine tools. It is also applicable to other production equipment using NC systems.

Industrial automation systems and integration — Numerical control systems for machine tools — Part 1: Requirements for numerical control systems

T/ZZB 2748-2022 汽车制动卡钳数控加工车铣复合机床

本文件规定了汽车制动卡钳数控加工车铣复合机床的型式和基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于汽车制动卡钳数控加工车铣复合机床（以下简称机床）。

CNC turning and milling composite machine tool for automobile brake caliper

T/SHMHZQ 010-2022 数控机床用换刀臂加工工艺规范

本文件规定了数控机床用换刀臂的结构、加工工艺及技术要求、加工安全要求。 本文件适用于数控机床用换刀臂加工。

Technical specification for tool changing arm of numerical control machines

T/ZZB 2726-2022 数控插齿机

本文件规定了数控插齿机（以下简称机床） 的术语和定义、结构及参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和质量承诺。 本文件适用于加工最大工件直径为125 mm～500 mm的数控插齿机。

Numerical control gear shaping machines

BS ISO 230-4:2022 机床测试代码 数控机床圆弧试验

What is ISO 230-4 - Circular tests for numerically controlled machine tools about?   ISO 230-4 is the fourth part of the ISO 230 multi-series that discusses test code for machine tools. ISO 230-4 provides methods for the determination of the contouring performance of numerically controlled machine tools. ISO 230-4 specifies methods of testing and evaluating the bi-directional circular error, the mean bi-directional radial error, the circular error and the radial error of circular paths that are produced by the simultaneous movements of two linear axes. ISO 230-4 also specifies methods of testing the deviations of the circular or constant radius trajectories generated by any combination of simultaneously controlled (coordinated) linear and rotary axes. The basic principle of these tests is to coordinate the multiple axes of motion (combination of rotary and linear axes) to keep the relative position between the tool and the workpiece constant. Who is ISO 230-4 - Circular tests for numerically controlled machine tools for?  ISO 230-4 on circular tests for numerically controlled machine tools is use...

Test code for machine tools. Circular tests for numerically controlled machine tools

T/ZZB 2652-2022 中小型数控立式滚齿机

本文件规定了中小型数控立式滚齿机的术语和符号、基本要求、技术要求、试验方法、检验规则、标志、随机文件及备件、包装、运输、贮存和质量承诺。 本文件适用于最大加工模数至4 mm、最大工件直径至400 mm的数控立式滚齿机（以下简称机床）。

CNC gear hobbing machines of small and meduim size