25.180.01 工业炉综合 标准查询与下载

EN 1539:2009 释放可燃物质的干燥机和烤箱.安全要求

This European Standard deals with all significant hazards, hazardous situations and hazardous events relevant to ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials.This European Standard is only applicable to machines which are used as intended and under the conditions which are foreseeable as malfunction by the manufacturer (see Clause 4).This European Standard is not applicable to: ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials, in which the concentration of these flammable substances shall not, under no circumstances, exceed 3 % of the LEL; NOTE 1 These machines are dealt with in EN 746-1 and EN 746-2. combined spraying and drying booths; NOTE 2 EN 13355 deals with combined spraying and drying booths. ovens for hardening metals; sintering furnaces; enamelling plants; portable heating systems for drying (for instance infrared radiant heaters, hot-air blowers, blow-dryers); machinery for production of pharmaceutical products; machinery for production of food; solvent recovery plants; distillation and/or refraction plants; textile dry-cleaning systems.This European Standard is not applicable to machinery manufactured before the date of its publication as EN.

Dryers and ovens, in which flammable substances are released - Safety requirements

SANS 329:2008 工业热处理设备-燃烧及燃料处理系统安全要求，

Specifies safety requirements for industrial thermoprocessing equipment using LPG, natural gas and solid fuels and that operates above 0,5 GJ/h. It applies specifically to the fuel immediately adjacent to the equipment, but downstream of the shut-off val

Industrial thermoprocessing equipment - Safety requirements for combustion and fuel-handling systems

DIN EN 1539 Berichtigung 1:2007 释放可燃物质的干燥机和烤箱.安全要求

Dryers and ovens, in which flammable substances are released - Safety requirements; German version EN 1539:2000, Corrigenda to DIN EN 1539:2000-03

SH/T 3065-2005 石油化工管式炉急弯弯管技术标准

本标准规定了石油化工管式炉用无缝急弯弯管（包括180°急弯弯管和90°弯头）的制造、检验、标志和包装要求。 本标准适用于石油化工管式炉用无缝急弯弯管。 本标准不适用于铸造的急弯弯管。

Technical standard for return bends and elbows of tubular heater in petrochemical industry

LST EN 746-8-2002 工业热处理设备 第8部分：淬火设备的特殊安全要求

Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment

LST EN 746-5-2002 工业热处理设备 第5部分：盐浴热处理设备的特殊安全要求

Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment

KS B 4302-2002(2007) 测试和导线EDM方法的检查

Test code for performance and accuracy of wire electrical discharge machines

DIN EN 746-5:2001 工业热处理设备.第5部分:盐浴热处理设备特殊安全要求

The document gives the specific hazards and safety requirements for the melting and use of molten salt that shall be provided by the manufacturer for Salt Bath Industrial Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant. The limits of the equipment will include any transportation equipment which is located wholly or partially in the bath.#,,#

Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment; German version EN 746-5:2000

DIN EN 746-8:2001 工业热处理设备.第8部分:淬火设备安全特殊要求

Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment; German version EN 746-8:2000

LST EN 746-4-2001 工业热处理设备 第4部分：热浸镀锌热处理设备的特殊安全要求

Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment

DS/EN 746-8:2000 工业热处理设备 第8部分：淬火设备的特殊安全要求

This part of EN 746 gives the specific hazards and safety requirements that shall be provided by the manufacturer for Quenching Equipment, whether it is used as an independent unit or an integrated part of a plant.

Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment

DS/EN 746-5:2000 工业热处理设备 第5部分：盐浴热处理设备的特殊安全要求

This part of EN 746 gives the specific hazards and safety requirements for the melting and use of molten salt that shall be provided by the manufacturer for Salt Bath Industrial Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant.

Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment

BS EN 746-5:2000 工业热处理设备.盐浴热处理设备的特殊安全性要求

This part of EN 746 gives the specific hazards and safety requirements for the melting and use of molten salt that shall be provided by the manufacturer for Salt Bath Industrial Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant. The limits of the equipment will include any transportation equipment which is located wholly or partially in the bath. This part of EN 746 does not cover the handling, storage, transport, disposal, transfer or regeneration of the salts and processed material outside the limits of the equipment. This part of EN 746 applies not only to the normal operation of the equipment but also to the safety of personnel and property when foreseeable faults occur. Examples of salt bath furnace set-ups are shown in Fig. 1, Fig. 2, Fig. 3 and Fig. 4. NOTE: There are many variations in the design of salt bath equipment. Only three examples of the various types are given in this text.

Industrial thermoprocessing equipment - Particular safety requirements for salt bath thermoprocessing equipment

BS EN 746-8:2000 工业热处理设备.淬火设备的特殊安全性要求

This part of EN 746 gives the specific hazards and safety requirements that shall be provided by the manufacturer for Quenching Equipment, whether it is used as an independent unit or an integrated part of a plant. This part of EN 746 does not cover specific hazards and safety requirements for Salt Bath bath equipment used as a quenching means (see EN 746-5:2000). This part of EN 746 does not cover the handling, storage, transport, disposal, transfer or regeneration of the quenching media and processed material outside the limits of the equipment. This part of EN 746 standard applies not only to the normal operation of the equipment but also to the safety of personnel and property when foreseeable faults occur in them. Examples of quenching equipment are shown in Fig. 1 and Fig. 2. NOTE: There are many variations in the design of quenching equipment. Only two examples of the various types are given in this text.

Industrial thermoprocessing equipment - Particular safety requirements for quenching equipment

EN 746-5:2000 工业热处理设备.第5部分:盐浴热处理设备的特殊安全要求

This part of EN 746 gives the specific hazards and safety requirements for the melting and useof molten salt that shall be provided by the manufacturer for Salt Bath IndustrialThermoprocessing Equipment, whether it is used as an independent unit or an integrated partof a plant. The limits of the equipment will include any transportation equipment which islocated wholly or partially in the bath.This part of EN 746 does not cover the handling, storage, transport, disposal, transfer orregeneration of the salts and processed material outside the limits of the equipment.This part of EN 746 applies not only to the normal operation of the equipment but also to thesafety of personnel and property when foreseeable faults occur.of salt bath furnace set-ups are shown in Fig. 1, Fig. 2, Fig. 3 and Fig. 4.There are many variations in the design of salt bath equipment. Only threeexamples of the various types are given in this text.

Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment

DS/EN 746-4:2000 工业热处理设备 第4部分：热浸镀锌热处理设备的特殊安全要求

This part of EN 746 gives the specific hazards and safety requirements that shall be provided by the manufacturer for Hot Dip Industrial Batch and the Bath of Continuous Galvanising Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant.

Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment

DIN EN 746-4:2000 工业热加工设备.第4部分:热浸电镀热加工设备的特殊安全要求

This document gives the specific hazards and safety requirements that shall be provided by the manufacturer for Hot Dip Industrial Batch and the Batch of Continous Galvanising Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant.#,,#

Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; German version EN 746-4:1999

BS EN 746-4:2000 工业热处理设备.热浸电镀热处理设备的特殊安全性要求

This part of EN 746 gives the specific hazards and safety requirements that shall be provided by the manufacturer for hot dip industrial batch and the bath of continuous galvanizing thermoprocessing equipment, whether it is used as an independent unit or an integrated part of a plant. This part of EN 746 does not deal with the risks arising from any component handling equipment for the dip process or for the associated protective measures. This part of EN 746 does not cover the handling, storage, transport, disposal, transfer or regeneration of the zinc and the processed material outside the limits of the equipment. This part of EN 746 applies not only to the normal operation of the equipment but also to the safety of personnel and property in the event of abnormal operation and when foreseeable faults occur. Examples of hot dip galvanizing equipment are shown in Figure 1 and Figure 2. NOTE: There are many variations in the design of galvanizing equipment. Only two examples of the various types are given in this text.

Industrial thermoprocessing equipment - Particular safety requirements for hot dip galvanizing thermoprocessing equipment

EN 746-4:2000 工业热处理设备.第4部分:热浸电解热处理设备的特殊安全要求

This part of EN 746 gives the specific hazards and safety requirements that shall be providedby the manufacturer for hot dip industrial batch and the bath of continuous galvanizingthermoprocessing equipment, whether it is used as an independent unit or an integrated part ofa plant.This part of EN 746 does not deal with the risks arising from any component handlingequipment for the dip process or for the associated protective measures.This part of EN 746 does not cover the handling, storage, transport, disposal, transfer orregeneration of the zinc and the processed material outside the limits of the equipment.This part of EN 746 applies not only to the normal operation of the equipment but also to thesafety of personnel and property in the event of abnormal operation and when foreseeable几ults occur.

Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment

JB/T 9691-1999 电热设备.产品型号编制方法

本标准规定了电热设备产品型号的编制方法。 本标准适用于新设计和改型设计的各类电热设备产品。电热设备的范围按GB/T 10067.1-1988中1.2的规定。

Specifications of product types for electroheat installations