25.180.01 工业炉综合 标准查询与下载
共找到 141 条与 工业炉综合 相关的标准，共 10 页
This document applies for new steel converter and its associated equipment (hereinafter referred to as converter plant) used in the process of carbon or stainless steel making as defined in 3.1 and illustrated in Annex B. This document deals with significant hazards, hazardous situations and events relevant to the converter plant. It covers the intended use and foreseeable misuse. This document specifies the safety requirements to be met during design, pre-assembly, transport, site- assembly, commissioning, operation, maintenance (as described in Clause 5) and decommissioning/dis assembly of the equipment. Assembly does not include erection because national regulations, e.g. national civil engineering laws and regulations or occupational health and safety regulations contain such information. This document applies to: Steel converter and its associated equipment (see Annex B, Figure B.1 for the oxygen steelmaking process — from charging hot metal/liquid steel and scrap; — via oxygen refining and stirring; — temperature measurement and sampling equipment; — up to tapping including slag retaining device; — cooling systems; — maintenance devices (e.g. relining device, tap hole repair device, device for cleaning the converter mouth); — process related interfaces/interactions (e.g. according to design, controls) to — process media, — primary and secondary gas cleaning plant, — material feeding systems and ladle alloying systems, — transfer cars for steel ladle and slag pot, and — charging/tapping equipment, e.g. crane, scrap chute, ladles and slag pots. This document does not cover safety requirements for: — usage of process media other than oxygen, nitrogen, argon and compressed air; — primary and secondary gas cleaning plants; — measuring devices with radioactive sources; — material feeding systems and ladle alloying systems; — transfer cars for steel ladle and slag pot; — charging/tapping and de-slagging equipment, e.g. crane, scrap chutes, ladles and slag pots; — auxiliary winches and hoists. For variations of converter process where other gases and process media, e.g. hydrocarbons, fuels, steam, etc. are used, additional safety measures shall be considered which are not covered in this safety standard. NOTE In case of revamping, this document can be used as a guideline for the specific parts to be revamped. This document is not applicable to steel converter and associated equipment manufactured before the date of its publication.
Industrial furnaces and associated processing equipment — Safety requirements for steel converter and associated equipment
- ICS
- 25.180.01
- CCS
- 发布
- 2021-04-09
- 实施
本文件规定了高效节能型铝合金燃气连续熔化保温炉的术语和定义、缩略语、炉型结构及主要技术参数、技术要求和设备运行工艺流程。
General technical requirements for high-efficient and energy-saving aluminum alloy gas continuous melting and holding furnace
- ICS
- 25.180.01
- CCS
- C346
- 发布
- 2020-12-15
- 实施
- 2021-12-21
Management specification for economical operation of boiler auxiliary equipment
- ICS
- 25.180.01
- CCS
- 98
- 发布
- 2019-09-27
- 实施
- 2020-04-01
Specification for inspection of corrugated furnace for pressure boiler
- ICS
- 25.180.01
- CCS
- J 98
- 发布
- 2019-02-13
- 实施
- 2019-05-13
1 范围 2 规范性引用文件 3 术语和定义 4 分类 5 技术要求 6 试验方法 7 检验规则 8 标志、使用说明书、包装、运输和贮存
Electromagnetic heating stove
- ICS
- 25.180.01
- CCS
- C349
- 发布
- 2018-09-15
- 实施
- 2018-10-11
This part of ISO 13579 specifies a general methodology for measuring energy balance and calculating the efficiency of the process involving reheating furnaces for steel as designed by furnace manufacturers. This general methodology includes: measurement methods; calculations (general calculation); energy balance and efficiency calculation evaluation report. This part of ISO 13579 is not applicable to any efficiencies related to the process itself outside of reheating furnaces for steel (e.g. in a rolling mill process, the reheating furnace is the only part covered by this part of ISO 13579).
Industrial furnaces and associated processing equipment -- Method of measuring energy balance and calculating efficiency -- Part 2: Reheating furnaces for steel
- ICS
- 25.180.01
- CCS
- 发布
- 2017-10-03
- 实施
This part of ISO 13579 specifies general methodology for measuring energy balance and calculating the efficiency of the process involving furnaces with protective or reactive atmosphere as designed by the furnace manufacturers. This general methodology includes: measurement methods; calculations (general calculation); evaluation report. This part of ISO 13579 is not applicable to any efficiencies related to the process itself outside of furnaces with protective or reactive atmosphere.
Industrial furnaces and associated processing equipment -- Method of measuring energy balance and calculating efficiency -- Part 4: Furnaces with protective or reactive atmosphere
- ICS
- 25.180.01
- CCS
- 发布
- 2017-10-03
- 实施
This part of ISO 13579 specifies general methodology for measuring energy balance and calculating the efficiency of the process involving batch-type aluminium melting furnaces as designed by furnace manufacturers. This general methodology includes: measurement methods; calculations (general calculation); energy balance and efficiency calculation evaluation report. This part of ISO 13579 is not applicable to any efficiencies related to the process itself outside of batch-type aluminium melting furnaces.
Industrial furnaces and associated processing equipment -- Method of measuring energy balance and calculating efficiency -- Part 3: Batch-type aluminium melting furnaces
- ICS
- 25.180.01
- CCS
- 发布
- 2017-10-03
- 实施
This document specifies the general safety requirements for electric arc furnaces (EAF) to melt steel not containing radioactive material. NOTE Radioactive material is considered to be detected in front of the steel plant entrance. This document deals with significant hazards, hazardous situations and events as listed in Table 1 pertinent to EAF, when used as intended and under conditions foreseen by the manufacturer, and also includes foreseeable faults and malfunctions in case of misuse. This document also specifies criteria for the plant and equipment integrated in the production process. This document specifies the requirements to be followed during design to ensure the safety of persons, which are to be met during transport, assembly, commissioning, operation, maintenance and decommissioning of the equipment. This document assumes that installations are operated and maintained by adequately trained personnel. Manual intervention for setting, adjustment and maintenance is accepted as part of the normal use of the equipment. This document covers the following equipment (see Annex B, Tables B.1 and B.2, and Annex C, Figures C.1 and C.2): — EAF with alternating current (AC) technology; — EAF with direct current (DC) technology; — scrap preheating technology; — associated equipment/devices (e.g. inert gas stirring, carbon and oxygen injection systems). The following equipment is not covered by this document: — induction furnace; — resistance-arc furnace (e.g. submerged arc furnace); — electron beam furnace; — plasma furnace; — other electrical furnaces used in secondary steelmaking, e.g. ladle furnace. This document does not specify safety requirements for the following equipment, which can be an integral or complementary part of the equipment covered by the scope: — cranes; — shell lifting cross beam; — scrap basket, steel ladle and slag pot; — transport cars for scrap baskets, steel ladles and slag pots; — dedusting system; — “dog house” and “elephant house” (furnace enclosures for environmental reasons); — alloying system; — separate scrap drying equipment; — furnace transformer and high-voltage system; — robots/manipulators (e.g. for temperature measurement and sampling).
Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces
- ICS
- 25.180.01
- CCS
- 发布
- 2017-09-26
- 实施
Industrial furnaces and associated processing equipment. Method of measuring energy balance and calculating energy efficiency. Evaluation of various kinds of efficiency
- ICS
- 25.180.01
- CCS
- 发布
- 2017-09-18
- 实施
- 2017-09-30
This document specifies classifications and designations in the methodology of energy efficiency evaluation of industrial furnaces and associated processing equipment (TPE), including energy efficiency in terms of exergy as well as enthalpy. This document does not apply to the following types of TPE: — blast furnaces, basic oxygen furnaces, coke ovens; — furnaces that generate gases to be used as fuel (including by-product gases); — special atmosphere gas generators; — industrial furnaces that are designed for chemical plants or petroleum plants; — installations where heating or combustion is performed in an open space; — installations that combust solid fuel; — waste incinerators.
Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating energy efficiency — Part 11: Evaluation of various kinds of efficiency
- ICS
- 25.180.01
- CCS
- 发布
- 2017-08-10
- 实施
铸造行业企业大气污染物排放限值分为两级； 1 级适用于一般地区，2 级适用于大气污染物防治重点地区. 排放级别 生产工序 设 备 排放浓度限值 监控 位置 颗粒物 SO2 NOX VOCs NMHC 1级 金属熔炼 冲天炉 40 100 150 - - 车间或生产设施 排气筒 电弧炉、精炼炉 30 - 150 - - 燃气炉 20 50 200 - - 其他熔炼设备 20 - - - - 造型、制芯、浇注、落砂、冷却、砂再生 造型机、制芯机、抛丸机、落砂机、打磨机、砂再生等设备 20 - - 50 80 2级 金属熔炼 冲天炉 20 60 100 - - 燃气炉 15 50 150 - - 电弧炉、精炼炉 15 - 150 - - 其他熔炼设备 15 - - - - 造型、制芯、浇注、落砂、冷却、砂再生 造型机、制芯机、抛丸机、落砂机、打磨机、砂再生等设备 15 - - 50 60
Emission limit of air pollutants for foundry industry
- ICS
- 25.180.01
- CCS
- C313
- 发布
- 2017-07-31
- 实施
- 2017-12-28
冲天炉大气污染物不允许无组织排放。冲天炉排放污染物限值：1级禁排；2级颗粒物排放20mg/m3，二氧化硫100mg/m3，氮氧化物100mg/m3；3级颗粒物排放40mg/m3，二氧化硫150mg/m3，氮氧化物150mg/m3.
Emission limits of air pollutants and test methods for cupola
- ICS
- 25.180.01
- CCS
- C313
- 发布
- 2016-08-29
- 实施
- 2016-11-18
本标准规定了对金属管状电热元件的各项要求，包括产品分类、技术要求、试验方法、检验规则及其订购和供货等。 本标准适用于按第3.1、4.1、和4.2条要求设计制造，工作电压不超过440V，以金属管作为外壳的管状电热元件。 本标准不适用于日用和类似用途的管状电热元件。 对在真空中或绝对压力超过1MPa的介质中使用以及有特殊要求的元件，除应符合本标准外还应符合相应的特殊要求的特殊要求标准。
Metal tubular electric heating elements
- ICS
- 25.180.01
- CCS
- K61
- 发布
- 2016-06-01
- 实施
- 2016-06-01
Dryers and ovens, in which flammable substances are released - Safety requirements; German version EN 1539:2015
- ICS
- 25.180.01
- CCS
- J66
- 发布
- 2016-02
- 实施
Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 3: Batch-type aluminium melting furnaces
- ICS
- 25.180.01
- CCS
- 发布
- 2016-01-26
- 实施
Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 2: Reheating furnaces for steel
- ICS
- 25.180.01
- CCS
- 发布
- 2016-01-26
- 实施
Industrial furnaces and associated processing equipment – Method of measuring energy balance and calculating efficiency – Part 1: General methodology
- ICS
- 25.180.01
- CCS
- 发布
- 2016-01-26
- 实施
Industrial furnaces and associated processing equipment – Method of measuring energy balance and calculating efficiency – Part 1: General methodology
- ICS
- 25.180.01
- CCS
- 发布
- 2016-01-26
- 实施
