25.180.01 工业炉综合 标准查询与下载

DIN EN 746-1:2010 工业热处理设备. 第1部分: 工业热处理设备的通用安全性要求; 德文版本EN 746-1: 1997+A1: 2009

The documentspecifies the common safety requirements for industrial thermoprocessing equipment according to EN ISO 12100-1:2003.

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment; German version EN 746-1:1997+A1:2009

DIN EN 1547:2010 工业热加工设备.工业热加工设备及其附属处理设备的噪音试验规程.德文版本EN 1547-2001+A1-2009

This standard specifies the means to determine, declare and verify the noise emission characteristics of the industrial thermoprocessing equipment detailed in clause 4. These means cover any ancillary equipment which forms an integral part of the equipment supplied at the same time (eg charging, discharging and process handling units). This noise test code also gives requirements for installation and operating conditions for the equipment within the scope of this Standard. It also indicates the location of work stations where measurements shall be made.

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment; German version EN 1547:2001+A1:2009

DS/EN 1539:2010 释放易燃物质的烘干机和烤箱 安全要求

This European Standard deals with all significant hazards, hazardous situations and hazardous events relevant to ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials.This European Standard is only applicable to machines which are used as intended and under the conditions which are foreseeable as malfunction by the manufacturer (see Clause 4).This European Standard is not applicable to:- ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials, in which the concentration of these flammable substances shall not, under no circumstances, exceed 3 %

Dryers and ovens, in which flammable substances are released - Safety requirements

LST EN 746-1-2000+A1-2010 工业热加工设备 第1部分：工业热加工设备的通用安全要求

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

NF T35-010:2010 释放易燃物质的干燥器和烘箱.安全要求

Dryers and ovens, in which flammable substances are released - Safety requirements.

ANSI/AHRI 711(SI)-2010 液体线干燥剂性能等级

Performance Rating of Liquid-Line Driers

ASME EA-1G-2010 过程加热系统的能量评估ASME EA-1标准用指南

This guidance document provides an applicationguide on how to utilize ASME EA-1, Energy Assessmentfor Process Heating Systems. This guidance documentprovides background and supporting information toassist in applying the standard.

Guidance for ASME EA-1, Energy Assessment for Process Heating Systems [ANSI designation: ASME TR EA-1G-2010] (EA-1G - 2010)

BS EN 1539:2009 内部释放可燃物质的干燥器和烘箱.安全性要求

This European Standard deals with all significant hazards, hazardous situations and hazardous events relevant to ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials. This European Standard is only applicable to machines which are used as intended and under the conditions which are foreseeable as malfunction by the manufacturer (see Clause 4). This European Standard is not applicable to: - ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials, in which the concentration of these flammable substances shall not, under no circumstances, exceed 3 % of the LEL; NOTE 1 These machines are dealt with in EN 746-1 and EN 746-2. - combined spraying and drying booths; NOTE 2 EN 13355 deals with combined spraying and drying booths. - ovens for hardening metals; - sintering furnaces; - enamelling plants; - portable heating systems for drying (for instance infrared radiant heaters, hot-air blowers, blow-dryers); - machinery for production of pharmaceutical products; - machinery for production of food; - solvent recovery plants; - distillation and/or refraction plants; - textile dry-cleaning systems. This European Standard is not applicable to machinery manufactured before the date of its publication as EN.

Dryers and ovens, in which flammable substances are released Safety requirements

LST EN 746-3-2000+A1-2009 工业热处理设备 第3部分：大气气体的产生和使用的安全要求

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

LST EN 1547-2002+A1-2009 工业热加工设备 包括其辅助处理设备的工业热加工设备的噪声测试规范

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment

NF E32-200-1*NF EN 746-1+A1:2009 工业热处理设备.第1部分:工业热处理设备用通用安全要求

Industrial thermoprocessing equipment - Part 1 : common safety requirements for industrial thermoprocessing equipment.

DS/EN 746-1+A1:2009 工业热加工设备 第1部分：工业热加工设备的通用安全要求

1.1 This part of EN 746 specifies common safety requirements for industrial thermoprocessing equipment (for example industrial furnaces and industrial heating equipment), which meets the definition for machinery given in EN ISO 12100-1:2003.It details the anticipated significant hazards associated with industrial thermoprocessing equipment and specifies the appropriate preventative measures for reduction or elimination of these hazards.This standard gives general principles and common requirements for the reduction of risks for equipments covered by the scope.The common requirements apply to all of the subsequent parts of this EN 746 dealing with specific e

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

DS/EN 746-3+A1:2009 工业热处理设备 第3部分：大气气体的产生和使用的安全要求

This part of EN 746 specifies safety requirements for atmosphere gas systems and their use in industrial thermo-processing equipment and associated plant, including systems for the production of atmosphere gases by reaction inside the thermo-processing equipment.It applies to the supply of atmosphere gases, gaseous and liquid additions to, and their removal from industrial thermo-processing equipment and associated plant, confined to equipment integrated in the thermo-processing and associated plant.This part of EN 746 also details the anticipated significant hazards associated with atmosphere gas systems and their use in industrial thermo-processing equipm

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

NF E32-200-3:2009 工业热加工设备.第3部分:产生和使用大气气体的安全要求

Industrial thermoprocessing equipment - Part 3 : safety requirements for the generation and use of atmosphere gases.

NF E32-200-3/IN1:2009 工业热处理工艺设备.第3部分:生成和使用大气气体的安全性要求

Industrial thermoprocessing equipment - Part 3 : safety requirements for the generation and use of atmosphere gases.

EN 746-1:1997+A1:2009 工业热处理设备.工业热处理设备的一般安全要求

This part of EN 746 specifies common safety requirements for industrial thermoprocessing equipment (for example industrial furnaces and industrial heating equipment), which meets the definition for machinery given in EN ISO 12100-1:2003. It details the anticipated significant hazards associated with industrial thermoprocessing equipment and specifies the appropriate preventative measures for reduction or elimination of these hazards. This standard gives general principles and common requirements for the reduction of risks for equipments covered by the scope. The common requirements apply to all of the subsequent parts of this EN 746 dealing with specific equipment unless an exception is stated in the relevant Part. The general principles (subclauses are pointed out) will be used to establish the specific technical measures in the subsequent Part(s) dealing with safety requirements for particular equipment. NOTE For similar equipment not covered by the particular Parts of this standard, EN 746-1 can be used to assist in the reduction of risk for the Hazards identified in clause 4 (List of Hazards). This part of EN 746 is applicable to industrial thermoprocessing equipments for use in fields such as: Metallurgical and metal working plant; Glass making plant; Ceramic manufacturing plant; Cement, lime and gypsum manufacturing plant; Chemical plant; Waste incineration equipment; And heated by: Gaseous fuels; Liquid fuels; Solid fuels; Mixed fuels; Electricity. The thermoprocessing equipment covered by this Part of EN 746 is further specified in clause 3. A more detailed list of thermoprocessing equipment within these categories is given in Annex A. In the remainder of this standard the expression "equipment" will be used. This Part of EN 746 is not applicable to blast furnaces, converters (in steel plants), boilers, welding machines or food processing equipment. This Part of EN 746 specifies the requirements to be met by the manufacturer to ensure the safety of persons and property during commissioning, start-up, operation, shut-down, maintenance periods and dismantling, as well as in the event of foreseeable faults or malfunctions which can occur in the equipment. It specifies the safety requirements at stages in the life of the equipment, and its design, ordering, construction, use and disposal. It specifies safety requirements for: Protection against: Mechanical hazards, movement of machinery and material, ejection of parts or material or liquids and gases, implosion, structural failure; Electrical hazards; Thermal hazards: explosion, fire, scalds, contact with hot parts, gases and flames; Noise and vibration; Thermal, optical and ionising and non-ionising radiation; Harmful by-products and hazardous substances, poisoning, biological and microbiological contamination, pollution and environmental discomfort; Other hazards such as listed in clause 4; maintenance, provision for indicators, and inspection. This part of EN 746 applies to equipment which is placed on the market after the date of issue of this standard.

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

EN 746-3:1997+A1:2009 工业热处理设备.第3部分:生产和使用大气气体的安全要求

This part of EN 746 specifies safety requirements for atmosphere gas systems and their use in industrial thermo-processing equipment and associated plant, including systems for the production of atmosphere gases by reaction inside the thermo-processing equipment. It applies to the supply of atmosphere gases, gaseous and liquid additions to, and their removal from industrial thermo-processing equipment and associated plant, confined to equipment integrated in the thermo- processing and associated plant. This part of EN 746 also details the anticipated significant hazards associated with atmosphere gas systems and their use in industrial thermo-processing equipment and specifies the appropriate preventative measures for the reduction or elimination of these hazards. This part of EN 746 does not apply to atmosphere process gases, essential safety equipment, start-up, operation and shut-down of thermo-processing plant for semi-conductor devices for which special additional engineering requirements are necessary. This part of EN 746 specifies the requirements to be met to ensure the safety of persons and property during commissioning, start up, operation, shut down and maintenance, as well as in the event of foreseeable faults or malfunctions which can occur in the equipment. It specifies the safety requirements at stages in the life of the equipment, and its design, ordering, construction and use. This part of EN 746 applies to equipment which is placed on the market after the date of issue of this standard. The hazards covered by this Part of EN 746 are listed in clause 4. A table of typical atmosphere gases is given in Annex A.

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

EN 1547:2001+A1:2009 工业热加工设备.工业热加工设备和其附属处理设备的噪音试验规程 包含修改件A1,2009

This noise test code specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the noise emission characteristics of industrial thermoprocessing equipment as described especially in EN 746-1, EN 746-2 and EN 746-3. It also indicates the location of work stations where measurements need to be made. Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. The determination of these quantities is necessary for: manufacturers to declare the noise emitted; comparing the noise emitted by machines in the group concerned; purposes of noise control at the source at the design stage. The use of this standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods allowed by this standard are engineering methods (grade 2) and survey methods (grade 3). This standard does not cover the computation of personnel daily noise exposure.

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment

ANSI/ASME EA-1-2009 过程加热系统的能量评估

This Standard covers process heating systems that are defined as a group (or a set, or combination) of heating equipment used for heating materials in the production of goods in an industrial plant. These systems, commonly referred to using terms such as furnaces, melters, ovens, and heaters, use heat sources such as fuels, electricity, steam or other fluids to supply the required heat. This Standard sets the requirements for conducting and reporting the results of a process heating energy assessment (hereafter referred to as an "assessment") that considers the entire system, from energy inputs to the work performed as the result of these inputs. An assessment meeting this standard need not address each individual system component or specific system within an industrial facility with equal weight; however, it shall be sufficiently comprehensive to identify the major energy efficiency opportunities for improving the overall energy performance of the system. This Standard is designed to be applied primarily at industrial facilities, but many of the concepts can be used in other facilities such as those in the institutional and commercial sectors.

Energy Assessment for Process Heating Systems

ASME EA-1-2009 过程加热系统的能量评估

This Standard covers process heating systems that are defined as a group (or a set, or combination) of heating equipment used for heating materials in the production of goods in an industrial plant. These systems, commonly referred to using terms such as furnaces, melters, ovens, and heaters, use heat sources such as fuels, electricity, steam or other fluids to supply the required heat. This Standard sets the requirements for conducting and reporting the results of a process heating energy assessment (hereafter referred to as an assessment) that considers the entire system, from energy inputs to the work performed as the result of these inputs. An assessment meeting this standard need not address each individual system component or specific system within an industrial facility with equal weight; however, it shall be sufficiently comprehensive to identify the major energy efficiency opportunities for improving the overall energy performance of the system. This Standard is designed to be applied primarily at industrial facilities, but many of the concepts can be used in other facilities such as those in the institutional and commercial sectors.

Energy Assessment for Process Heating Systems