25.220.60 标准查询与下载

DS/EN 14879-3:2007 保护工业设备和工厂免受侵蚀性介质腐蚀的有机涂层系统和衬里 第3部分：混凝土部件上的涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners).The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes:. to protect the component from damaging effects of aggressive substances;. to protect waters (e.g. ground water) from harmful substances;. to protect

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components

DS/EN 14879-2:2007 保护工业设备和工厂免受侵蚀性介质腐蚀的有机涂层系统和衬里 第2部分：金属部件上的涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to metallic process engineering equipment that will come in contact with chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners or been given by national regulations).The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes:. to protect the component from adverse effects of aggressive substances;. to protect waters (e.g. ground water) against haz

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components

DIN EN 14879-2:2007 防侵蚀物体引起腐蚀的工业装置和设备用有机涂层系统和衬料.第2部分:金属构件涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to metallic process engineering equipment that will come in contact with chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners or been given by national regulations). The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes: — to protect the component from adverse effects of aggressive substances; — to protect waters (e.g. ground water) against hazardous substances; — to protect the charge from becoming contaminated by components released from the substrate material; — to achieve a particular surface properties. * The described coatings are to be used for metallic process engineering equipment that will come in contact with chemical substances. The different coating systems are: — laminate coating systems which contain cold-curing resins; — trowelled coating which contain cold-curing resins; — sprayed coating systems which contain resins (in special cases, such coatings may also be applied by brushing, rolling, flow coating, dipping, or by other means, such as providing sleeving for nozzles); — powder coating systems which contain organic materials (powder coatings may be used as corrosion pro¬tection or for non-stick purposes). For design and preparation of substrate see EN 14879-1.

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components; English version of DIN EN 14879-2:2007-02

DIN EN 14879-3:2007 工业装置和设备用防腐蚀物质引起腐蚀的有机涂层系统和衬料.第3部分:混凝土构件涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners). The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes: — to protect the component from damaging effects of aggressive substances; — to protect waters (e.g. ground water) from harmful substances; — to protect the charge from becoming contaminated by components released from the substrate material; — to achieve a particular surface properties. The different coating systems are: a) impregnation, seals, thin coatings (applied by brushing, spraying or rolling); b) high-build coatings (applied by brushing, spraying, rolling, trowelling or pouring (self-levelling)); c) laminate coatings; d) resinous screed; e) mastic asphalt screed with a waterproofing layer; f) combinations of the above coatings. Table 1 shows the coating methods to be employed for various types of concrete members. Handling of aggressive or water pollutant materials is understood to include: 1) storage; 2) filling; 3) loading and unloading; 4) manufacture; 5) treatment; 6) use.

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components; German version EN 14879-3:2006

BS EN 14879-3:2007 防止侵蚀物体腐蚀工业装置和设备用有机涂层系统和衬料 第3部分：混凝土构件涂层

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Coatings on concrete components

BS EN 14879-2:2006 防止工业装置和设备受侵蚀物体腐蚀用有机涂覆系统和衬料.第2部分:金属构件涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to metallic process engineering equipment that will come in contact with chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners or been given by national regulations). The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes:  to protect the component from adverse effects of aggressive substances;  to protect waters (e.g. ground water) against hazardous substances;  to protect the charge from becoming contaminated by components released from the substrate material;  to achieve a particular surface properties. The described coatings are to be used for metallic process engineering equipment that will come in contact with chemical substances. The different coating systems are:  laminate coating systems which contain cold-curing resins;  trowelled coating which contain cold-curing resins;  sprayed coating systems which contain resins (in special cases, such coatings may also be applied by brushing, rolling, flow coating, dipping, or by other means, such as providing sleeving for nozzles);  powder coating systems which contain organic materials (powder coatings may be used as corrosion protection or for non-stick purposes). For design and preparation of substrate see EN 14879-1.

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media — Part 2: Coatings on metallic components

BS EN 14879-3:2006 防止侵蚀物体腐蚀工业装置和设备用有机涂层系统和衬料.第3部分:混凝土构件涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners). The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes:  to protect the component from damaging effects of aggressive substances;  to protect waters (e.g. ground water) from harmful substances;  to protect the charge from becoming contaminated by components released from the substrate material;  to achieve a particular surface properties. The different coating systems are: a) impregnation, seals, thin coatings (applied by brushing, spraying or rolling); b) high-build coatings (applied by brushing, spraying, rolling, trowelling or pouring (self-levelling)); c) laminate coatings; d) resinous screed; e) mastic asphalt screed with a waterproofing layer; f) combinations of the above coatings. Table 1 shows the coating methods to be employed for various types of concrete members. Handling of aggressive or water pollutant materials is understood to include: 1) storage; 2) filling; 3) loading and unloading; 4) manufacture; 5) treatment; 6) use.

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media — Part 3: Coatings on concrete components

BS EN 14879-2:2007 防止工业装置和设备受侵蚀物体腐蚀用有机涂覆系统和衬料 第2部分：金属构件涂层

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Coatings on metallic components

CAN/CSA-Z245.20-06/Z245.21-2006 钢管外熔结环氧涂层/管道外聚乙烯涂层

1 Scope 1.1 This Standard covers the qualification, application, inspection, testing, handling, and storage of materials required for plant-applied fusion bond epoxy (FBE) coating applied externally to bare steel pipe. The coated pipe is intended primarily for buried or submerged service for oil or gas pipeline systems. 1.2 This Standard covers the following coating systems: (a) System 1A: single-layer FBE with a glass transition temperature of 110 °C or less; (b) System 1B: single-layer FBE with a glass transition temperature greater than 110 °C; (c) System 2A: two-layer FBE with a corrosion coating and a protective overcoat; (d) System 2B: two-layer FBE with a corrosion coating and an abrasion-resistant overcoat; (e) System 2C: two-layer FBE with a corrosion coating and an anti-slip overcoat; and (f) System 3: three-layer FBE with an anti-slip overcoat applied over a corrosion coating and a protective overcoat. 1.3 In CSA Standards, ?shall? is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; ?should? is used to express a recommendation or that which is advised but not required; ?may? is used to express an option or that which is permissible within the limits of the standard; and ?can? is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

External fusion bond epoxy coating for steel pipe/ External polyethylene coating for pipe

LST EN 13523-26-2006 卷材涂层金属 试验方法 第26部分：耐水冷凝

Coil coated metals - Test methods - Part 26: Resistance to condensation of water

LST EN 13523-25-2006 卷材涂层金属 测试方法 第25部分：耐湿性

Coil coated metals - Test methods - Part 25: Resistance to humidity

DIN EN 13523-25:2006 滚涂金属.试验方法.第25部分:耐潮性

This Part of EN 13523 describes a procedure for evaluating the humidity resistance of an organic coating (coil coated) on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.#,,#

Coil coated metals - Test methods - Part 25: Resistance to humidity; German version of DIN EN 13523-25:2006-08

DIN EN 13523-26:2006 卷材覆层金属.第26部分:耐水浓缩

Coil coated metals - Test methods - Part 26: Resistance to condensation of water English version of DIN EN 13523-26:2006-08

JIS H 8630:2006 装饰用塑料材料的电镀层

この規格は，プラスチック上に装飾用の目的で行った電気めっき(以下，めっきという。)のめっき有効面について規定する。

Electroplated coatings on plastics materials for decorative purposes

BS EN 13438:2006 涂料和清漆 建筑用镀锌或镀锌粉钢产品用粉末有机涂层

Paints and varnishes. Powder organic coatings for galvanized or sherardised steel products for construction purposes

BS EN 14879-3:2006(2007) 保护工业设备和工厂免受侵蚀性介质腐蚀的有机涂层系统和衬里 混凝土部件上的涂层

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Coatings on concrete components

BS EN 14879-2:2006(2007) 保护工业设备和工厂免受侵蚀性介质腐蚀的有机涂层系统和衬里 金属部件上的涂层

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Coatings on metallic components

DIN EN 13438:2006 色漆和清漆.建筑用镀锌或粉末镀锌钢产品用的粉末有机涂层

This standard specifies performance requirements for powder coatings electrostatically applied to galvanized or sherardised steel products, for architectural and construction purposes. Requirements for cleaning and pretreatment of the galvanized steel products prior to powder coating are also specified.

Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes; English version of DIN EN 13438:2005

EN 14879-2:2006 防止工业装置和设备受侵蚀物体腐蚀用有机涂覆系统和衬料.第2部分:金属构件涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to metallic process engineering equipment that will come in contact with chemical substances (liquids,solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. As agreed between the contract partners or been given by national regulations).The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes:to protect the component from adverse effects of aggressive substances;to protect waters (e.g. ground water) against hazardou

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components

EN 14879-3:2006 防止侵蚀物体腐蚀工业装置和设备用有机涂层系统和衬料.第3部分:混凝土构件涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners).The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes:to protect the component from damaging effects of aggressive substances;to protect waters (e.g. ground water) from harmful substances;to protect the ch

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components