27.020 内燃机 标准查询与下载
共找到 1868 条与 内燃机 相关的标准，共 125 页
本标准规定了导热硅胶垫片的术语定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于导热硅胶垫片的生产和检验。
Thermally Conductive Silicone Gasket
- ICS
- 27.020
- CCS
- C291
- 发布
- 2023-06-20
- 实施
- 2023-06-30
本文件规定了柴油机非贵金属催化型排气捕集器的术语和定义、技术要求、试验条件、试验方法和检验规则等。 本文件适用于柴油机非贵金属催化型排气捕集器（以下简称“捕集器”）产品的制造。 其余技术内容见标准文本。
Diesel engines - Non precious metal catalytic exhaust trap
- ICS
- 27.020
- CCS
- C341
- 发布
- 2023-06-20
- 实施
- 2023-06-20
本文件规定了排气管用玄武岩纤维针刺毡的术语和定义、分类和标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本文件适用于排气管用玄武岩纤维针刺毡。 其余技术内容见标准文本。
Basalt fiber needled felt used for exhaust pipe
- ICS
- 27.020
- CCS
- C341
- 发布
- 2023-06-20
- 实施
- 2023-06-20
This document specifies the survey method, which is the measurement method of the sound power level for reciprocating internal combustion engines. This document applies to all reciprocating internal combustion engines falling within the field of application of ISO 3046‑1 and other internal combustion engines where no suitable International Standard exists. NOTE In this document, reciprocating internal combustion engines are referred to as engines unless otherwise explained.
Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 2: Survey method
- ICS
- 27.020
- CCS
- 发布
- 2023-05-03
- 实施
This document specifies a method of testing full‐flow lubricating oil filters for internal combustion engines to determine their ability to withstand a static pressure objective and to determine their burst pressure and the failure mode concerned. It does not apply to filters for use in aeronautical applications or plastic components.
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 6: Static burst pressure test
- ICS
- 27.020
- CCS
- 发布
- 2023-05-03
- 实施
This document specifies the engineering method, which is the measurement method of the sound power level for reciprocating internal combustion engines. This document applies to all reciprocating internal combustion engines falling within the field of application of ISO 3046-1 and other internal combustion engines where no suitable International Standard exists. NOTE In this document, reciprocating internal combustion engines are referred to as engines unless otherwise explained.
Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 1: Engineering method
- ICS
- 27.020
- CCS
- 发布
- 2023-05-03
- 实施
1 Scope This document specifies the hydraulic pulse durability test for composite filter housings. This method tests the ability of full-flow lubricating oil filters manufactured with composite pressure vessel materials for internal combustion engines to withstand an internal pressure surge and cyclic internal pressure variations experienced in the application at specified operating temperatures. These tests are intended for application to spin-on type filters and detachable filters with disposable elements constructed of composite or temperature-sensitive materials.
Methods of test for full-flow lubricating oil filters for internal combustion engines - Hydraulic pulse durability for composite filter housings
- ICS
- 27.020
- CCS
- 发布
- 2023-04-30
- 实施
- 2023-04-30
This document specifies the hydraulic pulse durability test for composite filter housings. This method tests the ability of full-flow lubricating oil filters manufactured with composite pressure vessel materials for internal combustion engines to withstand an internal pressure surge and cyclic internal pressure variations experienced in the application at specified operating temperatures. These tests are intended for application to spin-on type filters and detachable filters with disposable elements constructed of composite or temperature-sensitive materials.
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Hydraulic pulse durability for composite filter housings
- ICS
- 27.020
- CCS
- 发布
- 2023-03-24
- 实施
- 2023-03
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 6: Static burst pressure test
- ICS
- 27.020
- CCS
- 发布
- 2023-02-20
- 实施
术语和定义、质量指标、试验方法和检验规则。
The high pressure pump of electronic control common rail fuel injection system for diesel engines—Product quality grading specification
- ICS
- 27.020
- CCS
- C341
- 发布
- 2023-02-14
- 实施
- 2023-02-23
质量指标、检验方法、抽样检查和等级评定规则、样本的抽取和产品质量等级评定。
The injector of electronic control common rail fuel injection system for diesel engines—Specification for grading of product quality
- ICS
- 27.020
- CCS
- C341
- 发布
- 2023-02-14
- 实施
- 2023-02-23
质量指标、试验方法、检验规则、样本的抽取和产品质量等级评定。
Gasoline direct injection system—Product quality grading specification
- ICS
- 27.020
- CCS
- C341
- 发布
- 2023-02-14
- 实施
- 2023-02-23
质量指标、试验方法、检验规则、样本的抽取和产品质量等级评定。
Fuel injector assembly of gasoline direct injection system —Product quality grading specification
- ICS
- 27.020
- CCS
- C341
- 发布
- 2023-02-14
- 实施
- 2023-02-23
术语定义、试验条件、试验方法、数据处理和试验报告。
Vehicle diesel engine and aftertreatment system bench test method for emissions durability
- ICS
- 27.020
- CCS
- C341
- 发布
- 2023-02-14
- 实施
- 2023-02-23
质量指标、试验方法和检验规则。
The rail of electronic control common rail fuel injection system for diesel engines—Product quality grading specification
- ICS
- 27.020
- CCS
- C341
- 发布
- 2023-02-14
- 实施
- 2023-02-23
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
- ICS
- 27.020
- CCS
- 发布
- 2022-12-22
- 实施
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 5: Test for hydraulic pulse durability
- ICS
- 27.020
- CCS
- 发布
- 2022-12-22
- 实施
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 5: Test for hydraulic pulse durability
- ICS
- 27.020
- CCS
- 发布
- 2022-12-22
- 实施
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
- ICS
- 27.020
- CCS
- 发布
- 2022-12-22
- 实施
This document defines terms relating to the valves, camshaft drives and actuating mechanisms of reciprocating internal combustion engines.
Reciprocating internal combustion engines — Vocabulary of components and systems — Part 3: Valves, camshaft drives and actuating mechanisms
- ICS
- 27.020
- CCS
- 发布
- 2022-12-12
- 实施
