27.070 燃料电池 标准查询与下载

BS EN 62282-6-200:2012 燃料电池技术. 微型燃料电池发电系统. 性能试验方法

Fuel cell technologies. Micro fuel cell power systems. Performance test methods

DS/IEC/TS 62282-7-1:2012 燃料电池技术 第 7-1 部分：聚合物电解质燃料电池（PEFC）的单电池测试方法

This part of IEC 62282 covers cell assemblies, test apparatus, measuring instruments andmeasuring methods, performance test methods, and test reports for PEFC single cells.This Technical Specification is used for evaluating:a) the performance of membrane

Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)

IEC 62282-6-100:2010+AMD1:2012 CSV 燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性

Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety

IEC 62282-6-100:2010/AMD1:2012 燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性

Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety

IEC 62282-6-100:2012 燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性

Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety

IEC 62282-5-1:2012 燃料电池技术.第5-1部分:便携式燃料电池装置.安全性

This part of IEC 62282 covers construction@ marking and test requirements for portable fuel cell power systems. These fuel cell systems are movable and not fastened or otherwise secured to a specific location. The purpose of the portable fuel cell power system is to produce electrical power. This standard applies to a.c. and d.c. type portable fuel cell power systems@ with a rated output voltage not exceeding 600 V a.c.@ or 850 V d.c. for indoor and outdoor use. These portable fuel cell power systems are not to be used in hazardous locations as defined by IEV 426-03-01 unless additional protective measures are added in accordance with IEC 60079-0. This standard does not apply to portable fuel cell power systems that are a) permanently connected (hard wired) to the electrical distribution system@ b) permanently connected to a utility fuel distribution system@ c) exporting power to the grid@ d) for propulsion of road vehicles@ e) intended to be used on board passenger aircraft. Fuel cells that provide battery charging for hybrid vehicles where the battery provides power and energy for propulsion of the vehicle are not included in the scope of this standard The following fuels and fuel feedstocks are considered within the scope of this standard: ? natural gas; ?liquefied petroleum gas@ such as propane and butane; ?liquid alcohols@ for example methanol@ ethanol; ?gasoline; ?diesel; ?kerosene; ?hydrogen; ?metals (e.g. Mg@ Al or Zn) or metal alloys immersed in electrolyte (e.g. aqueous solutions of salts or alkali) in air or oxygen; ?chemical hydrides. This standard does not preclude the use of similar fuels or oxidants from sources other than air provided the unique hazards are addressed through additional requirements.

Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety

DIN IEC/TS 62282-7-1:2012 燃料电池技术. 第7-1部分:聚合物电解质燃料电池 (PEFC) 的单电池试验方法 (IEC/TS 62282-7-1-2010)

Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC) (IEC/TS 62282-7-1:2010)

IEC 105/429/CD:2012 IEC 62282-7-2:燃料电池技术.第7-2部分:固体氧化物燃料电池(SOFC)用单电池/堆栈性能检测方法

IEC 62282-7-2: Fuel cell technologies - Part 7-2: Single cell/stack performance test methods for solid oxide fuel cells (SOFC)

BS EN 62282-2:2012 燃料电池技术.燃料电池模件

Fuel cell technologies. Fuel cell modules

DIN EN 62282-3-200:2012 燃料电池工艺.第3-200部分:固定燃料电池电源系统性能试验方法(IEC 62282-3-200-2011).德文版本EN 62282-3-200-2012

Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods (IEC 62282-3-200:2011); German version EN 62282-3-200:2012

LST EN 62282-3-100-2012 燃料电池技术 第 3-100 部分：固定式燃料电池动力系统 安全（IEC 62282-3-100:2012）

Fuel cell technologies -- Part 3-100: Stationary fuel cell power systems - Safety (IEC 62282-3-100:2012)

IEC 62282-6-200:2012 燃料电池技术.第6-200部分:微型燃料电池动力系统.性能测试方法

This part of IEC 62282 provides test methods which are required for the performance evaluation of micro fuel cell power systems for laptop computers@ mobile phones@ personal digital assistants (PDAs)@ cordless home appliances@ TV broadcast cameras@ autonomous robots@ etc. This standard describes the performance test methods for power characteristics@ fuel consumption and mechanical durability for micro fuel cell power systems with output up to 60 V d.c. and 240 VA. The functional arrangement of a typical example of a micro fuel cell power system@ evaluated according to this part of IEC 62282@ is shown in Figure 1. This standard does not address the safety of micro fuel cell power systems. This standard does not address the interchangeability of micro fuel cell power systems.

Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods

DS/EN 62282-3-100:2012 燃料电池技术 第 3-100 部分：固定式燃料电池动力系统 安全

IEC 62282-3-100:2012(E) is applicable to stationary fuel cell power systems intended for indoor and outdoor commercial, industrial and residential use in non-hazardous (unclassified) areas. It contemplates all significant hazards, hazardous situations and

Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety

IEC 62282-3-300:2012 燃料电池技术. 第3-300部分: 固定式燃料电池发电系统. 安装

This part of IEC 62282 provides minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems in compliance with IEC 62282-3-100 and applies to the installation of the following systems: - intended for electrical connection to mains directly or with a readily accessible, manually operable switch or circuit-breaker; - intended for a stand-alone power distribution system; - intended to provide AC or DC power; - with or without the ability to recover useful heat. This standard is limited to those conditions that may be created by the installation process that can lead to personnel hazards or damage to equipment or property external to the fuel cell power system. This standard does not cover the safety requirements of the stationary fuel cell power system which are covered by IEC 62282-3-100. Additionally, this standard does not cover: - fuel supply and/or fuel storage systems; - auxiliary media supply and disposal; - switches or circuit-breakers; - portable fuel cell power systems; - propulsion fuel cell power systems; - APU (auxiliary power units) applications. A typical stationary fuel cell power system installation is represented in Figure 1.

Fuel cell technologies - Part 3-300: Stationary fuel cell powersystems - Installation

DIN EN 62282-6-100:2012 燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性(IEC 62282-6-100-2010 + Cor.-2011).德文版本EN 62282-6-100-2010

Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010 + Cor.:2011); German version EN 62282-6-100:2010

BS EN 62282-3-100:2012 燃料电池技术.固定燃料电池动力系统.安全性

Fuel cell technologies. Stationary fuel cell power systems. Safety

DS/EN 62282-3-200:2012 燃料电池技术 第 3-200 部分：固定式燃料电池动力系统 性能测试方法

This part of IEC 62282 covers operational and environmental aspects of the stationary fuel cell power systems performance. The test methods apply as follows:– power output under specified operating and transient conditions;– electric and thermal efficienc

Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods

NF C56-282-3-200:2012 燃料电池技术.第3-200部分:固定燃料电池电源系统.性能试验方法

Fuel cell technologies - Part 3-200 : stationary fuel cell power systems -Performance test methods.

LST EN 62282-3-200-2012 燃料电池技术 第 3-200 部分：固定式燃料电池动力系统 性能测试方法（IEC 62282-3-200:2011）

Fuel cell technologies -- Part 3-200: Stationary fuel cell power systems - Performance test methods (IEC 62282-3-200:2011)

IEC 62282-2:2012 燃料电池技术.第2部分:燃料电池模块

Fuel cell technologies - Part 2: Fuel cell modules