27.070 燃料电池 标准查询与下载

JIS C 8851:2013 标准住宅的小型燃料电池发电系统11模式能源效率和全年能耗的测量方法

Measurement methods for 11 mode energy efficiency of small fuel cell power systems and for annual energy consumption of standard residence

NF C56-282-3-201:2013 燃料电池技术. 第3-201部分: 固定式燃料电池动力系统. 小型燃料电池动力系统的性能试验方法

Fuel cell technologies - Part 3-201 : stationary fuel cell power systems - Performance test methods for small fuel cell power systems

NF C56-282-6-300*NF EN 62282-6-300:2013 燃料电池技术. 第6-300部分: 微型燃料电池发电系统. 燃料元件互换性

Fuel cell technologies - Part 6-300 : micro fuel cell power systems - Fuel catridge interchangeability

KS C IEC 62282-2-2013(2018) 燃料电池技术第2部分:燃料电池组件

Fuel cell technologies－Part 2：Fuel cell modules

KS C IEC 62282-2:2013 燃料电池技术.第2部分:燃料电池模块

이 표준은 연료전지 모듈의 안전 및 성능을 위한 최소 요구조건을 규정한다. 이 표준은 다음의 전해질 화학을 가지고 있는 연료전지 모듈에 적용한다.― 알카라인― 수소이온 교환막(직접 메탄올 연료전지 포함)― 인산― 용융 탄산염― 고체 산화물― 염의 수용액연료전지 모듈은 내용물을 포함하거나 또는 포함하지 않을 수 있으며, 가압조건 또는 대기압 조건에서 운전할 수 있다.이 표준은 사람에게 해를 입힐 수 있으며 연료전지 모듈 외부에 손상을 입힐 수 있는 조건만을 다루고 있다. 만일 연료전지 모듈 외부에 어떠한 해나 손상을 초래하지 않을지라도, 연료전지 모듈 내부에 대한 손상 방지법은 이 표준에서 언급하고 있지 않다.이 요구사항은 특정 적용에 요구되는 연료전지 모듈을 포함하는 장비의 또 다른 표준에 의해 대체될수도 있다.이 표준은 수송용에는 적용되지 않는다.이 표준은 기술적 진보를 제한하거나 방해하기 위한 것이 아니다. 이 표준의 요구사항과 상이한 재료들을 채택 또는 제작형태를 가지는 기기는 이 요구조건에 따라 조사와 시험을 받을 수 있다. 그리고 그러한 기기들이 만약 실질적으로 동등하다고 판단되면 이 표준에 적합한 것으로 고려할 수 있다.연료전지 모듈은 최종 제품의 구성품이다. 이러한 제품은 적절한 최종 제품 안전 요구사항에 대한평가가 요구된다.이 표준은 연료전지 모듈의 직류출력

Fuel cell technologies-Part 2:Fuel cell modules

IEC TS 62282-1:2013 燃料电池技术.第1部分:术语

This part of IEC 62282 provides uniform terminology in the forms of diagrams, definitions and equations related to fuel cell technologies in all applications including but not limited to stationary power, transportation, portable power and micro power applications.

Fuel cell technologies.Part 1: Terminology

DS/EN 62282-3-201:2013 燃料电池技术 第 3-201 部分：固定式燃料电池动力系统 小型燃料电池动力系统的性能测试方法

IEC 62282-3-201:2013 provides test methods for the electric/thermal and environmental performance of small stationary fuel cell power systems that meet the following criteria: - output: nominal electric power output of less than 10 kW; - output mode: grid

Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems

BS EN 62282-3-201:2013 燃料电池技术. 固定式燃料电池动力系统. 小型燃料电池动力系统的性能试验方法

Fuel cell technologies. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems

DS/EN 62282-6-300:2013 燃料电池技术 第 6-300 部分：微型燃料电池动力系统 燃料盒互换性

IEC 62282-6-300:2012 covers interchangeability of micro fuel cell (MFC) fuel cartridges to provide the cartridge compatibility for a variety of MFC power units while maintaining the safety and performance of MFC power systems. For this purpose, the standa

Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability

DIN EN 62282-6-100/A1:2013 燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性(IEC 62282-6-100-2010/A1-2012).德文版本 EN 62282-6-100-2010/A1-2012

Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010/A1:2012); German version EN 62282-6-100:2010/A1:2012

BS EN 62282-6-300:2013 燃料电池技术.微型燃料电池发电系统.燃料筒的互换性

Fuel cell technologies. Micro fuel cell power systems. Fuel cartridge interchangeability

EN 62282-6-300:2013 燃料电池技术.第6-300部分:微型燃料电池动力系统.燃料元件互换性

IEC 62282-6-300:2012 covers interchangeability of micro fuel cell (MFC) fuel cartridges to provide the cartridge compatibility for a variety of MFC power units while maintaining the safety and performance of MFC power systems. For this purpose, the standard covers fuel cartridges and their connector designs. Fuel type, fuel concentration and fuel quality are also covered. This standard also provides for the means to avoid the miss-connection of an improper fuel cartridge. Test methods for verifying the compliance with the interchangeability requirements for fuel and fuel cartridges are also provided in this standard. The main changes with respect to the previous edition are listed below: - updates to Type A to D interchangeable connectors, addition of Type E; - updates of the procedures, criteria and figures of the type tests for interchangeable connectors to ensure accurate and consistent results.

Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability

IEC 62282-3-201:2013 燃料电池技术.第3-201部分:固定燃料电池电源系统.小型燃料电池电源系统性能试验方法

"This part of IEC 62282 provides test methods for the electric/thermal and environmental performance of small stationary fuel cell power systems that meet the following criteria: ? output: nominal electric power output of less than 10 kW; ? output mode: grid-connected/independent operation or stand-alone operation with single-phase AC output or 3-phase AC output not exceeding 1 000 V@ or DC output not exceeding 1 500 V; NOTE The limit to 1 000 V comes from the definition for ""low voltage"" given in IEV 601-01-26. ? operating pressure: maximum allowable working pressure of less than 0@1 MPa (gauge) for the fuel and oxidant passages; ? fuel: gaseous fuel (natural gas@ liquefied petroleum gas@ propane@ butane@ hydrogen@ etc.) or liquid fuel (kerosene@ methanol@ etc.); ? oxidant: air. This standard covers fuel cell power systems whose primary purpose is the production of electric power and whose secondary purpose may be the utilization of by-product heat. Accordingly@ fuel cell power systems for which the use of heat is primary and the use of by-product electric power is secondary are outside the scope of this standard. All systems with integrated batteries are covered by this standard. This includes systems where batteries are recharged internally or recharged from an external source. This standard does not cover additional auxiliary heat generators that produce thermal energy."

Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems

DIN EN 62282-5-1:2013 燃料电池技术.第5-1部分:便携式燃料电池电力系统.安全性(IEC 62282-5-1-2012).德文版本EN 62282-5-1-2012

Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety (IEC 62282-5-1:2012); German version EN 62282-5-1:2012

DIN EN 62282-6-200:2013 燃料电池技术. 第6-200部分:微型燃料电池发电系统. 性能试验方法 (IEC 62282-6-200-2012); 德文版本62282-6-200-2012

Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2012); German version EN 62282-6-200:2012

DS/EN 62282-5-1:2013 燃料电池技术 第 5-1 部分：便携式燃料电池电源系统 安全

IEC 62282-5-1:2012(E) covers construction, marking and test requirements for portable fuel cell power systems intended to produce electrical power. Applies to a.c. and d.c. type portable fuel cell power systems, with a rated output voltage not exceeding 6

Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety

DS/EN 62282-3-300:2013 燃料电池技术 第 3-300 部分：固定式燃料电池电源系统 安装

IEC 62282-3-300:2012 provides minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems in compliance with IEC 62282-3-100 and applies to the installation of the following systems: - intended for electrical

Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation

DS/EN 62282-6-200:2013 燃料电池技术 第 6-200 部分：微型燃料电池动力系统 性能测试方法

IEC 62282-6-200:2012 provides test methods which are required for the performance evaluation of micro fuel cell power systems for laptop computers, mobile phones, personal digital assistants, cordless home appliances, TV broadcast cameras, autonomous robo

Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods

DS/EN 62282-6-100/A1:2013 燃料电池技术 第 6-100 部分：微型燃料电池动力系统 安全

IEC 62282-6-100:2010(E) covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. Est

Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety

LST EN 62282-6-100-2010/A1-2013 燃料电池技术 第 6-100 部分：微型燃料电池动力系统 安全性（IEC 62282-6-100:2010/A1:2012）

Fuel cell technologies -- Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010/A1:2012)