27.070 燃料电池 标准查询与下载
共找到 399 条与 燃料电池 相关的标准，共 27 页
Safety Technical Requirements for Proton Exchange Membrane Fuel Cell Engines
- ICS
- 27.070
- CCS
- F 19
- 发布
- 2020-08-31
- 实施
- 2020-10-01
Technical Requirements for Proton Exchange Membrane Fuel Cell Coolant
- ICS
- 27.070
- CCS
- F 19
- 发布
- 2020-08-31
- 实施
- 2020-10-01
Durability evaluation method for proton exchange membrane fuel cell stacks for commercial vehicles
- ICS
- 27.070
- CCS
- F 19
- 发布
- 2020-08-31
- 实施
- 2020-10-01
What is BS EN IEC 62282 ‑ 2 ‑ 100 about? BS EN IEC 62282 ‑ 2 ‑ 100 provides safety-related requirements for construction, operation under normal and abnormal conditions for the testing of fuel cell modules. It applies to fuel cell modules with the electrolyte chemistry such as alkaline, polymer electrolyte (including direct methanol fuel cells)2, phosphoric acid, molten carbonate, solid oxide, an aqueous solution of salts. BS EN IEC 62282 ‑ 2 ‑ 100 deals with conditions that can yield hazards to persons and cause damage outside the fuel cell modules. Note 1: BS EN IEC 62282 ‑ 2 ‑ 100 covers only up to the DC output of the fuel cell module and does not apply to peripheral devices as illustrated in Figure 1. Note 2: BS EN IEC 62282 ‑ 2 ‑ 100 does not cover the storage and delivery of fuel and oxidant to the fuel cell module. Note 3: Protection against damage inside th...
Fuel cell technologies - Fuel cell modules. Safety
- ICS
- 27.070
- CCS
- 发布
- 2020-06-30
- 实施
- 2020-06-30
IEC 62282-2-100:2020 provides safety related requirements for construction, operation under normal and abnormal conditions and the testing of fuel cell modules. This document deals with conditions that can yield hazards to persons and cause damage outside the fuel cell modules. Protection against damage inside the fuel cell modules is not addressed in this document, provided it does not lead to hazards outside the module. These requirements can be superseded by other standards for equipment containing fuel cell modules as required for particular applications. This first edition cancels and replaces IEC 62282-2, published in 2012. This edition includes the following significant technical changes with respect to IEC 622822:2012: • update of definitions, in particular fuel cell module for normal operation; • leakage values under normal and abnormal operation have been addressed; • a delayed ignition test has been included; • protective measures to limit gas leakage have been included; • the requirements for insulation between live parts and SELV have been updated; • the general safety strategy has been modified to reflect the needs for different application standards; the modifications are in line with similar modifications made to IEC 62282-3-100; • the electrical components clause has been modified to reflect the needs for different application standards; the modifications are in line with similar modifications made to IEC 62282-3-100; • protective earthing as part of the module or bonding as a measure within the installation has been introduced; • a dielectric strength test has been completely updated by referring to IEC 62744-1 for voltages up to 1 000 V AC/1 500 V DC; • a new “pressure drop method” leakage test method has been included; • a new Annex addressing significant hazards, hazardous situations and events dealt with in this document, and linked to 4.1 (General safety strategy) has been added.
Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
- ICS
- 27.070
- CCS
- 发布
- 2020-06-19
- 实施
- 2020-09-11 (7)
Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
- ICS
- 27.070
- CCS
- 发布
- 2020-05-07
- 实施
膜电极的输出性能和耐久性是评价燃料电池系统性能和寿命的关键参数，本标准在GB/T 20042.5-2009的基础上，补充了膜电极的串漏率、抗反极性能以及多项耐久性测试，提出了新的铂载量和欧姆极化电阻的测试方法
Proton exchange membrane fuel cell membrane electrode test method
- ICS
- 27.070
- CCS
- C3670
- 发布
- 2020-04-27
- 实施
- 2020-05-26
IEC 62282-8-101:2020 addresses solid oxide cell (SOC) and stack assembly unit(s). It provides for testing systems, instruments and measuring methods to test the performance of SOC cell/stack assembly units for energy storage purposes. It assesses performance in fuel cell mode, in electrolysis mode and/or in reversible operation. This document is intended for data exchanges in commercial transactions between cell/stack manufacturers and system developers or for acquiring data on a cell or stack in order to estimate the performance of a system based on it. Users of this document may selectively execute test items suitable for their purposes from those described in this document. Users can also substitute selected test methods of this document with equivalent test methods of IEC TS 62282-7-2 for SOC operation in fuel cell mode only.
Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
- ICS
- 27.070
- CCS
- 发布
- 2020-04-17
- 实施
- 2020-06-24 (7)
IEC 62282-3-100:2019 is available as IEC 62282-3-100:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. This document is applicable to stationary fuel cell power systems intended for indoor and outdoor commercial, industrial and residential use in non-hazardous areas. This second edition cancels and replaces the first edition published in 2012. This edition includes the following significant technical changes with respect to the previous edition: a) recognition that fuel carrying components qualified to leakage standards (soundness) need not be considered as potential flammable leak sources; b) new annex for small power systems; and c) clarifications for numerous requirements and tests
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
- ICS
- 27.070
- CCS
- 发布
- 2020-04-10
- 实施
- 2020-07-10 (7)
1 Scope This part of IEC 62282 deals with PEM cell/ stack assembly units, testing systems, instruments and measuring methods, and test methods to test the performance of PEM cells and stacks in fuel cell mode, electrolysis and/or reversible mode.
Fuel cell technologies - Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
- ICS
- 27.070
- CCS
- 发布
- 2020-03-31
- 实施
- 2020-03-31
IEC 62282-8-201:2020 defines the evaluation methods of typical performances for electric energy storage systems using hydrogen. This is applicable to the systems that use electrochemical reaction devices for both power charge and discharge. This document applies to systems that are designed and used for service and operation in stationary locations (indoor and outdoor). The conceptual configurations of the electric energy storage systems using hydrogen are shown in Figure 1 and Figure 2. Figure 1 shows the system independently equipped with an electrolyser module and a fuel cell module. Figure 2 shows the system equipped with a reversible cell module. There are an electrolyser, a hydrogen storage and a fuel cell, or a reversible cell, a hydrogen storage and an overall management system (which may include a pressure management) as indispensable components. There may be a battery, an oxygen storage, a heat management system (which may include a heat storage) and a water management system (which may include a water storage) as optional components. The performance measurement is executed in the area surrounded by the outside thick solid line square (system boundary).
Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
- ICS
- 27.070
- CCS
- 发布
- 2020-03-06
- 实施
- 2020-05-14 (7)
IEC 62282-8-102:2019 deals with PEM cell/stack assembly units, testing systems, instruments and measuring methods, and test methods to test the performance of PEM cells and stacks in fuel cell mode, electrolysis and/or reversible mode.
Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
- ICS
- 27.070
- CCS
- 发布
- 2020-03-06
- 实施
- 2020-04-17 (7)
International Electrotechnical Vocabulary (IEV) - Part 485: Fuel cell technologies
- ICS
- 27.070
- CCS
- 发布
- 2020-02-19
- 实施
Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible o
- ICS
- 27.070
- CCS
- 发布
- 2020-02-18
- 实施
Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
- ICS
- 27.070
- CCS
- 发布
- 2020-01-10
- 实施
Fuel cell technologies — Part 3-300: Stationary fuel cell power systems — Installation
- ICS
- 27.070
- CCS
- 发布
- 20191224
- 实施
- 20191224
Fuel cell technologies — Part 3-201: Stationary fuel cell power sytems — Performance test methods for small fuel cell power systems
- ICS
- 27.070
- CCS
- 发布
- 20191224
- 实施
- 20191224
Fuel Cell Technologies — Part 2: Terminology
- ICS
- 27.070
- CCS
- 发布
- 20191224
- 实施
- 20191224
Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
- ICS
- 27.070
- CCS
- 发布
- 20191224
- 实施
- 20191224
