29.035.20 塑料和橡胶绝缘材料 标准查询与下载
共找到 1692 条与 塑料和橡胶绝缘材料 相关的标准，共 113 页
This standard is applicable to heat shrinkable low voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 °C and 100 °C.
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications (IEC 62677-3-102:2018); German version EN IEC 626
- ICS
- 29.035.20
- CCS
- 发布
- 2018-09-00
- 实施
- 2018-09-01
This part of IEC 62677 is applicable to heat shrinkable low voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 °C and 100 °C. The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options. The material is available in two types: Type A - Flame retardant Type B - Not flame retardant
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications (IEC 62677-3-101:2018); German version EN IEC 62677-3-101:2018
- ICS
- 29.035.20
- CCS
- 发布
- 2018-08-01
- 实施
- 2018-08-01
This amendment introduces revised limits for CHARPY and IZOD impact strengths for the requirements of all types of rigid laminated sheets based on silicone resins. These revised limits are based on the results of round-robin testing.
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003 + A1:
- ICS
- 29.035.20
- CCS
- K15
- 发布
- 2018-07-01
- 实施
- 2018-07-01
This part of IEC 60893 serves as a technical report and presents tables of typical values for properties that are not studied and not given in Table 5 of IEC 60893-3-2:2003/AMD1:2011, IEC 60893-3-3:2003/AMD1:2011, IEC 60893-3-4:2003/AMD1:2012, IEC 60893-3-5:2003/AMD1:2009, IEC 60893-3-6:2003/AMD1:2009, IEC 60893-3-7:2003/AMD1:2009.
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values (IEC/TR 60893-4:2014 + A1:2017)
- ICS
- 29.035.20
- CCS
- K15
- 发布
- 2018-07-01
- 实施
- 2018-07-01
Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ICS
- 29.035.20
- CCS
- 发布
- 2018-06-01
- 实施
规定了LED封装用有机硅密封胶的术语和定义、技术要求、试验方法、检测规则以及标志、包装、运输和贮存。 混合粘度/mPa?s 2000~8000 3000~8000 操作时间/h ≥ 4 4 硬度 邵氏硬度A/30~80 邵氏硬度D/30~70 透光率/% ≥ 93 90 折射率 1.41±0.05 ≥1.53 剪切强度/MPa ≥ 2.5 2.5 氯钠钾离子总量/(mg/kg) ＜ 30 30 黄色指数 ＜ 0.5 1.0 水蒸汽透过率/[g/(m2?24h)] ＜ - 6 气体透过量/ (cm3/m2?24h?0.1MPa) ＜ - 350
Silicone sealant for LED packaging
- ICS
- 29.035.20
- CCS
- C383
- 发布
- 2018-05-28
- 实施
- 2018-08-20
Standard Test Methods for Polymeric Films Used for Electrical Insulation
- ICS
- 29.035.20
- CCS
- K15
- 发布
- 2018-05-01
- 实施
Standard Test Methods for Polytetrafluoroethylene Tubing
- ICS
- 29.035.20
- CCS
- 发布
- 2018-05-01
- 实施
1.1 This specification covers nonrigid tubing of vinyl chloride polymer or its copolymers with other materials for use in electrical insulation in three grades, as follows: 1.1.1 Grade A—General-purpose. 1.1.2 Grade B—Low-temperature. 1.1.3 Grade C—High-temperature. 1.2 This standard and IEC-60684-3-100 to -105 address the same subject matter but differ in technical content. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
- ICS
- 29.035.20
- CCS
- 发布
- 2018-05-01
- 实施
1.1 This specification covers flexible crosslinked chlorinated polyolefin heat-shrinkable tubing used for electrical insulating purposes. It is supplied in an expanded form and will shrink to the specified diameter when heated. NOTE 1—This standard does not have a similar or equivalent IEC standard. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.2.1 In some cases, temperatures are described in degrees Celsius only. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
- ICS
- 29.035.20
- CCS
- 发布
- 2018-05-01
- 实施
1.1 This specification applies to flexible, crosslinked and noncrosslinked poly(vinyl chloride) heat-shrinkable tubing for electrical insulating purposes. It is supplied in an expanded form and will shrink to its extruded diameter when heated. NOTE 1—This standard is similar but not identical to IEC 60684–3–201. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.2.1 In some cases (including the title), temperatures are described in degrees Celsius only. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
- ICS
- 29.035.20
- CCS
- 发布
- 2018-05-01
- 实施
Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ICS
- 29.035.20
- CCS
- 发布
- 2018-05-01
- 实施
Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyes
- ICS
- 29.035.20
- CCS
- 发布
- 2018-03-06
- 实施
Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive
- ICS
- 29.035.20
- CCS
- 发布
- 2018-03-06
- 实施
Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensiti
- ICS
- 29.035.20
- CCS
- 发布
- 2018-03-06
- 实施
Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose ace
- ICS
- 29.035.20
- CCS
- 发布
- 2018-03-06
- 实施
Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose ace
- ICS
- 29.035.20
- CCS
- 发布
- 2018-03-06
- 实施
Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyes
- ICS
- 29.035.20
- CCS
- 发布
- 2018-03-06
- 实施
Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose ace
- ICS
- 29.035.20
- CCS
- 发布
- 2018-03-06
- 实施
Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyes
- ICS
- 29.035.20
- CCS
- 发布
- 2018-03-06
- 实施
