29.035.20 塑料和橡胶绝缘材料 标准查询与下载
共找到 1692 条与 塑料和橡胶绝缘材料 相关的标准，共 113 页
Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 300: Glass textile fibre sleeving, braided, uncoated
- ICS
- 29.035.20
- CCS
- 发布
- 20191231
- 实施
- 20191231
Insulating materials — Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes — Part 1: Definitions, designations and general requirements
- ICS
- 29.035.20
- CCS
- 发布
- 20191231
- 实施
- 20191231
Polyester fibre woven tapes — Part 3: Specifications for individual materials — Sheet 1: Tapes woven on conventional or shuttleless looms
- ICS
- 29.035.20
- CCS
- 发布
- 20191231
- 实施
- 20191231
Specification for polyester fibre woven tapes — Part 1: Definitions, designation and general requirements
- ICS
- 29.035.20
- CCS
- 发布
- 20191231
- 实施
- 20191231
Specification for plastic films for electrical purposes —Part 3: Specifications for individual materials — Sheet 2:Requirements for balanced biaxially oriented polyethylene terephthalate(PET) films us
- ICS
- 29.035.20
- CCS
- 发布
- 2019-12-30
- 实施
Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
- ICS
- 29.035.20
- CCS
- 发布
- 2019-12-30
- 实施
Pressure-sensitive adhesive polyvinyl chloride tapes for electrical insulation
- ICS
- 29.035.20
- CCS
- 发布
- 2019-12-30
- 实施
Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
- ICS
- 29.035.20
- CCS
- 发布
- 2019-12-30
- 实施
Specification for plastic films for electrical purposes —Part 3: Specifications for individual materials — Sheet 2:Requirements for balanced biaxially oriented polyethylene terephthalate(PET) films us
- ICS
- 29.035.20
- CCS
- 发布
- 2019-12-30
- 实施
Plastic films for electrical purposes ― Part 3: Specifications for individual materials ― Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
- ICS
- 29.035.20
- CCS
- 发布
- 2019-12-30
- 实施
Plastic films for electrical purposes ― Part 3: Specifications for individual materials ― Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
- ICS
- 29.035.20
- CCS
- 发布
- 2019-12-30
- 实施
Testing method for the determination of solar heat gain coefficient of fenestration product using so
- ICS
- 29.035.20
- CCS
- 发布
- 20191122
- 实施
- 20191122
1.1 This specification covers vulcanized fibre (Note 1) sheets, rolls, round rods, and round tubes of such grades suitable for use as electrical insulation. NOTE 1—The variant spelling “fibre” has been approved by Committee D09 for use in this standard. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Vulcanized Fibre Sheets, Rolls, Rods, and Tubes Used for Electrical Insulation
- ICS
- 29.035.20
- CCS
- 发布
- 2019-11-01
- 实施
What is BS EN IEC 60684-3-280 - Polyolefin anti-tracking insulating sleeving about ? BS EN IEC 60684 is an international standard that discusses flexible insulating sleeving for electrical purposes. The main objective of the BS EN IEC 60684 series is to ensure that the insulating sleeving manufactured offers required level of electrical resistance. BS EN IEC 60684-3-280 gives the requirements for heat-shrinkable, polyolefin sleeving, antitracking with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures up to 100 °C. Typically: medium wall, internal diameter up to 110 mm. This sleeving is normally supplied in the colours red or brown. Who is BS EN IEC 60684-3-280 - Polyolefi...
Flexible insulating sleeving - Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
- ICS
- 29.035.20
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
What is BS EN IEC 60684-3-247 - Heat-shrinkable polyolefin sleeving about ? BS EN IEC 60684 is an international standard that discusses flexible insulating sleeving for electrical purposes. The main objective of the BS EN IEC 60684 series is to ensure that the insulating sleeving manufactured offers required level of electrical resistance. BS EN IEC 60684-3-247 gives requirements for two types of heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures of up to 100 °C.
Flexible insulating sleeving - Specifications for individual types of sleeving. Sheet 247. Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
- ICS
- 29.035.20
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
What is BS EN IEC 60684-3-283 - Polyolefin sleeving for bus-bar insulation about ? BS EN IEC 60684 is an international standard that discusses flexible insulating sleeving for electrical purposes. The main objective of the BS EN IEC 60684 series is to ensure that the insulating sleeving manufacturer offers required level of protection, for optimal performance of bus bars. BS EN IEC 60684-3-283 provides requirements for two types of heat-shrinkable, polyolefin sleeving for bus-bar insulation, with a nominal shrink ratio of 2,5:1. This sleeving has been found suitable up to temperatures of 100 °C. It covers: Type A: Medium wall – internal diameter up to 170,0 mm typically
Flexible insulating sleeving - Specifications for individual types of sleeving. Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation
- ICS
- 29.035.20
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
What is BS EN IEC 60684-3-216 - Limited-fire-hazard sleeving about ? BS EN IEC 60684 is an international standard that discusses flexible insulating sleeving for electrical purposes. The main objective of the BS EN IEC 60684 series is to ensure that the insulating sleeving manufactured offers required level of electrical resistance. BS EN IEC 60684-3-216 gives requirements for four types of heat-shrinkable, flame-retarded, limited-fire-hazard sleeving with a thermal endurance rating of 105 °C as shown below. Class A: thin wall shrink ratio 2:1 internal diameter up to 102,0 mm
Flexible insulating sleeving - Specifications for individual types of sleeving. Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving
- ICS
- 29.035.20
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
What is BS EN IEC 60684-3-214 - Heat-shrinkable polyolefin sleeving about ? BS EN IEC 60684 is an international standard that discusses flexible insulating sleeving for electrical purposes. The main objective of the BS EN IEC 60684 series is to ensure that the insulating sleeving manufactured offers required level of electrical resistance. BS EN IEC 60684-3-214 gives the requirements for two types of heat-shrinkable, polyolefin sleeving, not flame retarded, a thick and medium wall with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures of up to 100 °C. Type A: Medium wall – internal diameter up to 200 mm typically Type B: Thick wall – internal diameter up to 200 mm typically This sleeving is normally supplied in ...
Flexible insulating sleeving - Specifications for individual types of sleeving. Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
- ICS
- 29.035.20
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
IEC 60684-3-283:2019 is available as IEC 60684-3-283:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60684-3-283:2019 gives the requirements for two types of heat-shrinkable, polyolefin sleeving for bus-bar insulation, with a nominal shrink ratio of 2,5:1. This sleeving has been found suitable up to temperatures of 100 °C. Type A: Medium wall - internal diameter up to 170,0 mm typically Type B: Thick wall - internal diameter up to 165,0 mm typically These sleevings are normally supplied in colour, red or brown. Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Tables A.1 and A.2) provides guidance to the range of sizes available. The actual size and wall thickness will be agreed between the user and supplier depending on the electric strength of the installed tubing offered and the requirements of the user. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This second edition cancels and replaces the first edition published in 2010 and Amendment 1:2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - change of moulded plaque thickness for resistance to tracking and weathering tests to (6 ± 0,5) mm. Keywords: Heat-shrinkable, polyolefin sleeving for bus-bar insulation
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation
- ICS
- 29.035.20
- CCS
- 发布
- 2019-10-18
- 实施
- 2019-12-24 (7)
IEC 60684-3-280:2019 is available as IEC 60684-3-280:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 69684-3-280:2019 gives the requirements for heat-shrinkable, polyolefin sleeving, anti-tracking with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures up to 100 °C. Typically: medium wall, internal diameter up to 110 mm. This sleeving is normally supplied in the colours red or brown. Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Table A.1) provides guidance on the range of sizes available. The actual size will be agreed between the user and the supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This sleeving is designed to be used in medium voltage cable accessories and as such electrical performance willbe proven as part of the assembly. Examples of this are described in HD 629.1 and IEC 60502 (all parts). This second edition cancels and replaces the first edition published in 2010 and Amendment 1:2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - change of moulded plaque thickness for resistance to tracking and weathering tests to (6 ± 0,5) mm. Keywords: Heat-shrinkable, polyolefin sleeving, anti-tracking
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
- ICS
- 29.035.20
- CCS
- 发布
- 2019-10-18
- 实施
- 2019-12-24 (7)
