绝缘子标准-分析测试百科网

KS C 3819-2024 室内支柱绝缘子

Indoor post insulators

ICS: 29.080.10
CCS
发布: 2024-03-27
实施

BS EN IEC 62772:2023 交流复合空心站支柱绝缘子电压大于 1 000 V 和直流电压大于 1 500 V 定义、测试方法和验收标准

Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria

ICS: 29.080.10
CCS
发布: 2024-01-31
实施: 2024-01-31

IEC 62772:2023 交流电压大于 1 000 V 和直流电压大于 1 500 V 的复合空心站支柱绝缘子定义、试验方法和验收标准

Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria

ICS: 29.080.10
CCS
发布: 2023-11-15
实施: 2023-11-15

IEC 62772:2023 RLV 交流电压大于1000V和直流电压大于1500V的复合空心站用支柱绝缘子.定义、试验方法和验收标准

Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria

ICS: 29.080.10
CCS
发布: 2023-11-15
实施

T/JGE 0065-2023 江西绿色生态绝缘子

本文件规定了“江西绿色生态绝缘子”的分类、基本要求、评价指标要求、品牌互认。本文件适用于绝缘子产品申请“江西绿色生态”品牌的自我评价和第三方认证活动。

Jiangxi Green Ecology-Insulator

ICS: 29.080.10
CCS: C383
发布: 2023-10-14
实施: 2023-10-21

T/ZJSEE 0015-2023 架空线路复合绝缘子无人机红外检测导则

本文件规定了利用无人机机载红外设备开展架空输电线路复合绝缘子红外测试的检测要求、检测方法、发热原因判断和缺陷严重定级等方面的技术要求。

Guidance for composite insulators infrared test in overhead lines with unmanned aerial vehicles

ICS: 29.080.10
CCS: D4420
发布: 2023-09-18
实施: 2023-12-01

GSO IEC 60305:2023 标称电压1000 V以上架空线路用绝缘子交流系统用陶瓷或玻璃绝缘子单元帽式和针式绝缘子单元的特性

IEC 60305:2021 applies to string insulator units of the cap and pin type with insulating parts of ceramic material or glass, intended for AC overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to insulators of similar design used in substations. This document applies to string insulator units of the cap and pin type either with ball and socket couplings or with clevis and tongue couplings. This document applies to string insulator units for use on overhead lines in clean areas and polluted areas. For use in areas characterized by very heavy pollution levels and for other particular or extreme environmental conditions, it may be necessary for certain dimensions to be changed and insulator units having different creepage distances, spacing and forms may be preferred (for example, flat profile, hemispherical etc.). Insulators for use on DC systems may also need different dimensions. In any case, it is applicable that the standardized mechanical characteristics of this document and coupling sizes are retained. This fifth edition cancels and replaces the fourth edition published in 1995. This edition includes the following significant technical changes with respect to the previous edition: - wording in Scope changed from "it is recommended" to "it is applicable"; - new normative references added; - electromechanical or mechanical failing load in Clause 4 specified; - new figures added showing profiles.

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and pin type

ICS: 29.080.10
CCS
发布: 2023-09-10
实施

GSO IEC TS 62896:2023 高压应用交流和直流混合绝缘子定义、测试方法和验收标准

IEC TS 62896:2015(E) applies to hybrid insulators for a.c. and d.c. applications consisting of a load-bearing insulating solid or hollow core consisting of ceramic or glass, a housing (defined geometry, outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core. Hybrid insulators covered by this technical specification are intended for use as suspension/tension line insulators, line post insulators, station post insulators and hollow core insulators for apparatus. The object of this technical specification is to: - define the terms used; - prescribe test methods; - prescribe acceptance criteria. Silicone or other functional coatings (CIGRE Technical Brochure No. 478, Appendix B), booster sheds, shed extenders and rain deflectors are not within the scope of this technical specification. This technical specification does not include requirements dealing with the choice of insulators for specific operating conditions.

Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria

ICS: 29.080.10
CCS
发布: 2023-09-10
实施

GSO IEC 61466-1:2023 标称电压大于 1 000 V 架空线路用复合串绝缘子装置第1部分：标准强度和端部金具

IEC 61466-1:2016 is applicable to composite string insulator units for a.c. overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to insulators of similar design used in substations or on electric traction lines. This standard applies to string insulator units of composite type with ball, socket, tongue, clevis, Y-clevis or eye couplings, or a combination thereof. The object of this standard is to prescribe specified values for the mechanical characteristics of the composite string insulator units and define the main dimensions of the couplings to be used on the composite string insulator units in order to permit the assembly of insulators or fittings supplied by different manufacturers and to allow, whenever practical, interchangeability with existing installations. It also defines a standard designation system for composite string insulator units. This edition includes the following significant technical changes with respect to the previous edition: a) Addition of strength classes reflecting UHV practice; b) Inclusion of Corrigendum 1:2008 for Y fitting hole dimensions.

Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength and end fittings

ICS: 29.080.10
CCS
发布: 2023-09-10
实施

IEC 61462:2023 复合空心绝缘子用于交流额定电压大于1000V交流和直流电压大于1500V的电气设备的加压和非加压绝缘子定义、测试方法、验收标准和设计

Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V. Definitions, test methods, acceptance criteria and design…

ICS: 29.080.10
CCS
发布: 2023-09-06
实施: 2023-09-06

KS C IEC 62231-1-2023 交流电压大于1000V至245kV变电站用复合站用支柱绝缘子.第1部分:尺寸、机械和电气特性

Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV — Part 1: Dimensional, mechanical and electrical characteristics

ICS: 29.080.10
CCS
发布: 2023-05-16
实施