29.080.30 绝缘系统 标准查询与下载
共找到 363 条与 绝缘系统 相关的标准，共 25 页
Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
- ICS
- 29.080.30
- CCS
- F21
- 发布
- 2014-10
- 实施
Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS (IEC 61858-1:2014)
- ICS
- 29.080.30
- CCS
- 发布
- 2014-09-30
- 实施
이 표준은 인쇄 기판의 한쪽 면이나 양쪽 면을 절연 코팅한 인쇄 기판 조립품에 적용한다. 이러한 코팅은 절연 협조용으로 인쇄 기판 조립품 표면의 미시적 환경을 절연시키거나 오염으로부터 방지하기 위해 사용하며, 코팅을 적용한 인쇄 기판 조립품의 요구사항 및 시험절차를 기술하고 있다.이 표준에서는 두 가지 형태의 코팅에 대해 기술하고 있다.― A형 코팅은 오염에 대한 보호만이 가능하다. KS C IEC 60664-1의 공간 거리 및 연면 거리 요건이 코팅한 인쇄 기판 조립품에 적용된다.― B형 코팅은 오염 및 절연에 대한 보호가 가능하다. 코팅한 인쇄 기판 조립품에 공간 거리 및 연면 거리 요건이 적용되지 않는다. KS C IEC 60664-1의 고형 절연용 요건만이 적용된다.이 표준은 기능 절연 및 기초 절연에 적용 가능하다.?
Insulation coordination for equipment within low-voltage systmes — Part 3：Use of coatings to achieve insulation coordination of printed board assemblies
- ICS
- 29.080.30
- CCS
- 发布
- 2014-09-26
- 实施
- 2014-09-26
本标准规定了风力发电机绝缘系统的电、热、环境等单因子老化的评定试验方法，推荐了风力发电机绝缘系统多因子老化的评定试验方法。本标准适用于额定电压6.6kV及以下并网型风力发电机。
Evaluation method of electrical insulation systems for wind turbine generator
- ICS
- 29.080.30
- CCS
- K15
- 发布
- 2014-06-29
- 实施
- 2014-11-01
Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Wire-wound winding EIS
- ICS
- 29.080.30
- CCS
- K15
- 发布
- 2014-05-31
- 实施
- 2014-05-31
Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components. Simplified test
- ICS
- 29.080.30
- CCS
- K15
- 发布
- 2014-05-31
- 实施
- 2014-05-31
IEC 61858-1:2014 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in wire-wound winding electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in the IEC 61857 series. This first edition of IEC 61858-1 cancels and replaces the third edition of IEC 61858, published in 2008. It constitutes a technical and editorial revision. This edition includes the following significant technical changes with respect to the previous edition: a) this part is specifically for wire-wound winding EIS; b) new figures and charts support the contents.
Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
- ICS
- 29.080.30
- CCS
- 发布
- 2014-05-16
- 实施
- 2014-06-19 (7)
IEC 61858-2:2014 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in form-wound electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in IEC 60085 and IEC 60034-18-31.
Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS
- ICS
- 29.080.30
- CCS
- 发布
- 2014-05-09
- 实施
- 2014-06-19 (7)
Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test
- ICS
- 29.080.30
- CCS
- K15
- 发布
- 2014-04-24
- 实施
Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses (IEC 62068:2013); German version EN 62068:2013
- ICS
- 29.080.30
- CCS
- K15
- 发布
- 2014-03
- 实施
- 2014-03-01
Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Form-wound EIS
- ICS
- 29.080.30
- CCS
- K15;K30
- 发布
- 2014-02-28
- 实施
- 2014-02-28
Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Form-wound EIS
- ICS
- 29.080.30
- CCS
- K15
- 发布
- 2014-02-28
- 实施
- 2014-02-28
Electrical insulation systems - Thermal evaluation of modifications to an established EIS - Part 1: Wire-wound winding EIS
- ICS
- 29.080.30
- CCS
- K15
- 发布
- 2014-02
- 实施
- 2014-02-14
Electrical insulation systems - Thermal evaluation of modifications to an established EIS - Part 2: Form-wound EIS
- ICS
- 29.080.30
- CCS
- K15
- 发布
- 2014-02
- 实施
- 2014-02-14
Insulation coordination for equipment within low-voltage systems－Part 2－1：Application guide－Dimensioning procedure worksheets and dimensioning examples
- ICS
- 29.080.30
- CCS
- 发布
- 20140131
- 实施
- 20140131
Insulation coordination for equipment within low-voltage systems－Part 2－2：Interface considerations－Application guide
- ICS
- 29.080.30
- CCS
- 发布
- 20140131
- 实施
- 20140131
Insulation coordination for equipment within low-voltage systems－Part 3：Use of coatings to achieve insulation coordination of printed board assemblies
- ICS
- 29.080.30
- CCS
- 发布
- 20140131
- 实施
- 20140131
Insulation coordination for equipment within low-voltage systems－Part 2－2：Interface considerations－Application guide
- ICS
- 29.080.30
- CCS
- 发布
- 2014-01-31
- 实施
Insulation coordination for equipment within low-voltage systems－Part 3：Use of coatings to achieve insulation coordination of printed board assemblies
- ICS
- 29.080.30
- CCS
- 发布
- 2014-01-31
- 实施
