29.120.01 电工器件综合 标准查询与下载

GOST IEC 60906-1-2015 家用和类似用途插头和插座的IEC系统. 第1部分. 16 A 250伏交流电插头和插座

IEC system of plugs and socket-outlets for household and similar purposes. Part 1. Plugs and socket-outlets 16 A 250 V a.c.

BS PD IEC/TR 61916:2014 电器附件. 通用规则的协调

Electrical accessories. Harmonization of general rules

JB/T 10259-2014 电缆和光缆用阻水带

本标准规定了电缆和光缆用阻水带的术语和定义、代号、产品分类及产品表示方法、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于通信电缆、光缆用阻水带的制造、验收和使用，电力电缆用阻水带可参照使用。

Waterblocking tape for electric cables and optical fiber cables

JB/T 8593-2013 电器附件用面板、调整板和安装盒尺寸要求

本标准规定了电器附件用面板、调整板和安装盒的尺寸要求。本标准适用于额定电压不超过AC 440 V和DC 630 V、额定电流不大于63 A、家用及类似用途安装用的面板、调整板和安装盒。本标准亦适用于安装或悬吊照明设备用的安装盒和地面插座的安装盒。本标准不适用于装有过电流保护装置的组合电器附件中的面板、调整板和安装盒,也不适用于汇流条线槽型的电器附件中的面板、调整板和安装盒。本标准不适用于与设备组装在一起的、并根据设备而专门设计的面板、调整板和安装盒。

Dimensional requirements for cover-plates, adjusting plates and boxes for electrical accessories

JB/T 8165-2013 电器附件产品型号编制方法

本标准规定了电器附件产品型号命名的一般原则和编制方法。本标准适用于电器附件产品。

Type coding rules for electrical accessories

CAN/CSA-E60730-2-14-2013 家用和类似用途的自动电气控制 第 2-14 部分：电动执行器的特殊要求（第一版；第 1 次更新：2014年9月）

Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators (First Edition; Update No. 1: September 2014)

NB/T 31043-2012 海上风力发电机组主控制系统技术规范

本标准规定了海上风力发电机组主控制系统的相关术语和定义、技术要求、检验方法、检验规则、标志、标签、使用说明书、包装、运输、贮存等。本标准适用于海上风力发电机组主控制系统(以下简称主控制系统)。

Technical specification for main control system of offshore wind turbine generator system

NB/T 31044-2012 永磁风力发电机-变流器组技术规范

本标准规定了永磁风力发电机(以下简称发电机)一变流器组的相关术语及定义、技术要求、试验方法等。本标准适用于永磁风力发电机一变流器组(以下简称发变组)。对特殊要求,可由用户与制造厂协商。

Technical specification for permanent magnet wind turbine generator-converter set

NB/T 31042-2012 海上永磁风力发电机变流器

本标准规定了海上永磁风力发电机变流器(以下简称变流器)的术语和定义、技术要求、试验方法、检验规则及其产品的相关信息等。本标准适用于安装在海上风电场连接永磁风力发电机定子绕组的电压源型变流器。

Converter of offshore permanent magnet wind turbine generator

NB/T 31041-2012 海上双馈风力发电机变流器

本标准规定了海上双馈风力发电机变流器(以下简称“变流器”)的术语和定义、技术要求、试验方法、检验规则及其产品的相关信息等。本标准适用于安装在海上风场连接双馈风力发电机转子绕组的电压源型变流器。

Converter of offshore doubly-fed wind turbine generator

NB/T 31017-2011 双馈风力发电机组主控制系统技术规范

本标准规定了并网型陆（地）上双馈风力发电机组主控制系统（简称主控系统）的技术要求、试验方法、检验规则、标志、标签、使用说明书、包装、运输、储存等。 本标准适用于并网型陆（地）上双馈风力发电机组主控制系统，作为设计、制造、实验、检测和认证的依据。

Technical specification for main control system of double fed wind turbine generator system

NB/T 31018-2011 风力发电机组电动变桨控制系统技术规范

本标准规定了并网型陆地上风力发电机组用电动变浆距系统的技术要求、试验方法、检验规则、标志、标签、使用说明书、包装、运输、储存等。 本标准适用于并网型陆（地）上风力发电机组用电动变浆距系统，作为设计、制造、检测和认证的依据。

Wind turbine generator system technical specification of electric pitch system

NB/T 31016-2011 电池储能功率控制系统技术条件

本标准规定了电池储能功率控制系统的工作环境条件、电气条件、技术要求、试验方法、检验规则及标志等相关内容。本标准适用于风电、光伏发电等新能源发电系统和电力系统中的电池储能功率控制系统。

General specification for power control system of battery energy storage system

NB/T 31015-2011 永磁风力发电机变流器制造技术规范

本标准规定了永磁风力发电机变流器（以下简称“变流器”）的术语和定义、技术要求、试验方法、检验规则及其产品的相关信息等。 本标准适用于连接永磁风力发电机定子绕组的电压源型变流器。

Manufactured technical specification for converter of permanent magnet wind turbine generator

NB/T 31014-2011 双馈风力发电机变流器制造技术规范

本标准规定了双馈风力发电机变流器（以下简称“变流器”）的术语和定义、技术要求、试验方法、检验规则及其产品的相关信息等。 本标准适用于连接双馈风力发电机转子绕组的电压源型变流器。

Manufacturing technical specification for converter of double-fed wind turbine generator

MT/T 871-2011 矿用防爆低压交流真空馈电开关

Mine explosion-proof low-voltage AC vacuum feed switch

MT 871-2011 矿用防爆低压交流真空馈电开关

本标准规定了矿用防爆低压交流真空馈电开关的分类、特性、结构与性能要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于在含有瓦斯和煤尘的矿井中，作为交流50Hz，电压至1200V电路的总配电开关或分支馈电开关，也适用于直接控制大容量电动机不频繁起动的馈电开关。

Mining explosion-proof switchgear with vacuum circuit breaker for low-voltage alternate circuit

BS 5733:2010 电器辅助设备的一般要求.规范

1.1 This British Standard specifies requirements and tests to check the safety in normal use of electrical accessories which are not covered by other specific British Standards. Such accessories are intended for use in household, commercial and light industrial premises where: ? the nominal supply voltage does not exceed 250 V a.c. single?phase, 50 Hz to 60 Hz or 250 V d.c.; ? the rated current of the accessory does not exceed 63 A. Unless otherwise stated by the manufacturer, accessories conforming to this standard are intended for connection by cables or flexible cords conforming to BS 6004, BS 6007, BS 6500 or BS 7211. 1.2 This standard also covers: ? “plug-in” and other accessories in which electrical accessory components such as plug-pins, socket-contacts, switches, terminals, etc. are incorporated (see 5.1); ? maintenance free accessories (see 3.31). 1.3 Accessories conforming to this standard are suitable for use under the following conditions of service: ? an ambient temperature in the range -5 °C to +40 °C, the average value over 24 h not exceeding 25 °C; NOTE 1 Under normal conditions of use, the available cooling air is subject to natural atmospheric variations of temperature and hence the peak temperature occurs only occasionally during the hot season, and on those days when it does occur, it does not persist for lengthy periods. ? a situation not subject to direct radiation from the sun or other source of heat likely to raise temperatures above the limits specified above; ? an altitude not exceeding 2 000 m above sea-level; ? an atmosphere not subject to excessive pollution by smoke, chemical fumes, or other abnormal conditions. NOTE 2 Accessories conforming to this standard may be suitable for use in other conditions, subject to agreement between manufacturer and user. Information given in a manufacturer’s catalogue may take the place of such an agreement. 1.4 Requirements for electromagnetic compatibility are not given, as accessories do not in themselves produce extraneous emissions, nor is their functioning affected by external emissions. Therefore no emission or immunity tests are necessary. It should be noted that accessories containing active electronic components, other than luminous indicating devices, may be susceptible to, or emit, electromagnetic interference.

General requirements for electrical accessories - Specification

BS 5733:2010+A1:2014 电器附件的一般要求. 规范

This British Standard specifies requirements and tests to check the safety in normal use of electrical accessories which are not covered by other specific British Standards. Such accessories are intended for use in household, commercial and light industrial premises where: •the nominal supply voltage does not exceed 250 V a.c. single-phase, 50 Hz to 60 Hz or 250 V d.c.; •the rated current of the accessory does not exceed 63 A.

General requirements for electrical accessories. Specification

DS/IEC/TR 61916:2010 电气附件 通用规则的协调

This technical report provides recommendations and test requirements applicable to electrical accessories. It aims to harmonize general rules for the preparation of international standards in this field. It gives to that effect recommendations which are intended to be used as a guide.

Electrical accessories - Harmonization of general rules