共找到 289 条与 电工器件综合 相关的标准,共 20 页
IEC 63044-5-1:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document provides general performance requirements and test set-ups. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network.
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up
目前GB 14048.1-2006、GB 14048.1-2012、GB/T 14048.10-2016、GB/T 14048.11-2016等国标对大部分参数做了相关要求。但部分 标准侧重于低压开关设备,对于直流接触器不太具备针对性,同时具体实施方法不够完善。本标准主要 是将直流接触器相关介电性能定义、基本要求、设计要求、检测测试要求进行明确细化规范,使其更具 有针对性、规范性、指导性。
Dielectic properties of DC contactors
IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2. NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments
IEC 63044-1:2017 applies to all Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) and specifies the general requirements for these systems and products. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application specific controllers, field devices and their interfaces, and cabling and interconnection of devices used within a dedicated HBES/BACS network. This document provides an overview of the IEC 63044 series. To enable integration of a wide spectrum of applications, the IEC 63044 series covers electrical safety, functional safety, environmental conditions, EMC requirements, and installation and cabling rules and topologies. IEC 63044 is a series of product family standards.
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements
IEC 63044-3:2017 provides the electrical safety requirements related to the HBES/BACS network in addition to the product safety standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product safety standard exists. In addition, it defines safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by IEC 62949. This document is applicable to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, and cabling and interconnection of devices used within a dedicated HBES/BACS network. This document covers the following requirements and compliance criteria: protection from hazards in the device; protection from overvoltages on the network; protection from touch current; protection from hazards caused by different types of circuit; protection of the communication wiring from overheating caused by excessive current.
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements
IEC 63044-5-2:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document specifies EMC requirements for HBES/BACS to be installed in residential, commercial and light-industrial environments, according to the definition given in IEC 61000-6-1. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments
Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices – Part 1: 2,6 kW system
Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices – Part 2: 5,2 kW system
Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices – Part 3: AC/DC appliance inlet
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 1: General requirements
本文件规定了绕组式永磁调速器的术语和定义、型式、基本参数和尺寸,技术要求,试验方法,检验规则以及标志、包装和保用期的要求。 本文件适用于负载为风机、水泵的绕组式永磁调速器(机座号355~1 000)(以下简称调速器)。凡属本系列调速器所派生的各种系列调速器也可参照执行。
Technical specifications for winding permanent magnet governors (Frame size 355~1 000)
This part of IEC 63044 provides the functional safety requirements for HBES/BACS. In addition, it defines functional safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE 1 An e
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
This part of IEC 63044 provides the electrical safety requirements related to the HBES/BACS network in addition to the product safety standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product safety standa
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 3: Electrical safety requirements
General safety requirements for wiring devices (Amendment 1)
General safety requirements for wiring devices
本标准规定了复合绝缘子用铝合金铸件的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于电站用空心复合绝缘子和支柱复合绝缘子用(以下简称复合绝缘子)铝合金端部附件,这些端部附件采用铸造工艺。 本标准不包含超重盐雾等特殊运行条件下复合绝缘子用铝合金铸件的要求。
Technical specification for alumninium alloy castings to be used as composite insulator metal fittings
本标准规定了密集型母线槽(以下简称母线槽)的术语和定义、使用条件、技术要求、型式试验方法及判定条件、出厂检验、包装运输和贮存方法等。
Closed insulated busby trunking systems
Electrical accessories - Methodology for determining the energy efficiency class of electrical accessories
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号