29.120.01 电工器件综合 标准查询与下载

T/CSEE 0167-2020 电力需求响应系统数据模型技术规范

本标准定义了电力企业的电力需求响应系统数据模型。通过这些数据模型，电力企业需求响应的相关内外部系统就可以进行互操作，从而在行为上相互协调。 本标准适用于电力企业电力需求响应系统与内外部信息系统/终端间的接口建设。

Data Model Technical Specifications for Power Demand Response System

T/ZZB 1425-2019 工商业用组串式光伏并网逆变器

本标准规定了工商业用组串式光伏并网逆变器的术语和定义、产品类型、基本要求、使用环境、 技术要求、试验方法、检验规则、标识、 包装、使用说明书、运输、贮存和质量承诺。 本标准适用于连接到PV源电路直流电压不超过1500 V，交流输出电压不超过1000 V且额定功率大于30 kW的，用于工商业光伏发电系统的组串式光伏并网逆变器。

Grid-connected PV string inverter for industrial and commercial use

NB/T 10298-2019 光伏电站 适应性移动检测装置技术规范

Technical Specifications for Adaptive Movement Detection Devices for Photovoltaic Power Stations

EN IEC 63044-5-1:2019 家庭和楼宇电子系统（HBES）和楼宇自动化和控制系统（BACS） 第 5-1 部分：EMC 要求、条件和测试设置

IEC 63044-5-1:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document provides general performance requirements and test set-ups. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network.

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up

EN IEC 63044-5-3:2019 家庭和楼宇电子系统（HBES）和楼宇自动化和控制系统（BACS） 第 5-3 部分：工业环境中使用的 HBES/BACS 的 EMC 要求

IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2. NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments

NB/T 31043-2019 海上风力发电机组主控制系统技术规范

本标准规定了海上风力发电机组主控制系统的相关术语和定义、技术要求、检验方法、检验规则、标志、标签、使用说明书、包装、运输、贮存等。本标准适用于海上风力发电机组主控制系统(以下简称主控制系统)。

Technical specification for main control system of offshore wind turbine generator system

NB/T 10210-2019 风力发电机组超声波风速风向仪技术规范

Technical specification for ultrasonic wind speed and direction meter for wind turbines

NB/T 31016-2019 电池储能功率控制系统 变流器 技术规范

Technical specifications for converters in battery energy storage power control systems

NB/T 10211-2019 风力发电机组叶片电加热防/除冰控制系统技术规范

Technical specifications for wind turbine blade electric heating anti-icing/de-icing control system

NB/T 10186-2019 光储系统用功率转换设备技术规范

Technical specifications for power conversion equipment for optical storage systems

NB/T 31042-2019 海上永磁风力发电机变流器技术规范

Technical Specifications for Offshore Permanent Magnet Wind Turbine Converters

NB/T 10220-2019 高原型风力发电机组电气控制设备结构件设计规范

Design specifications for structural components of electrical control equipment for plateau wind turbines

IEC 60050-442:1998/AMD3:2019 修改件3.国际电工词汇（IEV）.第442部分:电气附件

Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories

T/CEC 200-2019 低压船岸连接系统接电箱技术条件

本标准规定了低压船岸连接系统接电箱技术要求、试验方法、检验、标志、包装、运输、贮存等。 本标准适用于新建及改造沿江、沿内河、沿海等港口及码头， 以及公务码头、集装箱码头、干散货码头、游轮码头及滚装船码头， 电压等级450V及以下， 电流等级63A及以上、350A及以下的低压船岸连接系统接电箱。

Technical specification for connection box of low-voltage ship-to-shore connection system

T/CSEE 0136-2019 额定电压1kV（Um=1.2kV）及以下光纤复合低压电缆光电一体化中间接续附件

本标准规定了额定电压1kV（Um=1.2kV）及以下光纤复合低压电缆（以下简称OPLC）光电一体化中间接续附件（以下简称中间接续附件）的型式与规格、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于额定电压1kV（Um=1.2kV）及以下光纤复合低压电缆的接续保护用光电一体化中间接续附件。

Optical fiber composite low-voltage cable optoelectronic integrated intermediate connection accessories for rated voltage 1kV (Um=1.2kV) and below

T/ZZB 0854-2018 户用型组串式光伏并网逆变器

本标准规定了户用型组串式光伏并网逆变器的术语和定义、产品类型、产品标识和资料、基本要求、结构和性能要求、试验方法、检验规则、质量承诺和服务。 本标准适用于以380 V(220 V)交流额定电压等级接入电网的户用型组串式光伏并网逆变器。

Residential PV Grid-tie String Inverter

NB/T 10088-2018 户外型光伏逆变成套装置技术规范

Technical Specifications for Outdoor Photovoltaic Inverter Sets

T/JSEE 003-2018 电力一次设备用电子标签技术规范

本标准主题章分为4章，由种类及规则要求、技术要求、试验要求、试验规则组成。第4章明确了电力一次设备电子标签的分类、外观及尺寸要求。第5章明确了标签的物理性能、电性能、通信规约等要求。第6章明确了标签测试的各类要求。第7章明确了标签在不同情况下的试验要求。本部分兼顾了电力设备的实际应用需求与RFID技术的应用现状与发展趋势，本着全面性、适用性和前瞻性等原则，给出了电力一次设备电子标签的种类及规格、技术以及试验的要求，最后提出了试验规则，以指导电力一次设备电子标签的识别及应用。标准中所列出的技术要求项目，是在种类及规格要求基础上，提出的更高要求，试验要求的实现将更进一步为电子标签的性能检测与验证提供依据与支持。这4章是总分总结构，第4章为后3章的基础，第5章和第6章并列，最后第7章为总结，能够为第4张、第5章和第6章规定的内容提供试验依据。

Technical specification for electronic tag for high voltage equipment

T/GDC 11-2018 出彩票商用游戏机

外观要求、尺寸偏差、装配质量、基本功能、性能要求、可靠性、显示屏、安全性能

Lottery commercial game machine

T/CEEIA 298-2018 防腐金属管状电热元件

本标准规定了防腐金属管状电热元件（以下简称“元件”）的术语和定义、型号命名、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于安装在家用和类似用途热水器中、在腐蚀性加热介质中工作的、额定电压不超过480?V、单管额定功率不超过9?000?W的元件。 本标准不适用于： ——专门用于工业用途的元件； ——在真空或绝对压力超过1?MPa环境下工作的元件； ——在易燃易爆环境下工作的元件。 

Corrosion resistant metallic tube electric heating elements