29.140.99 有关灯的其他标准 标准查询与下载

T/CASME 1345-2024 智慧物联网隧道照明驱动电源

本文件规定了智慧物联网隧道照明驱动电源的术语和定义、产品命名方式、要求、试验方法、检验规则、标志、包装、运输和贮存。

Intelligent power supply for internet of things tunnel lighting

BS EN IEC 63013:2019+A2:2024 LED 封装 长期发光、辐射和光子通量维持预测

LED packages. Long-term luminous, radiant and photon flux maintenance projection

T/CIES 035-2024 生鲜食用农产品照明光源显色性规范

自2023年12月1日起，国家市场监督管理总局《食用农产品市场销售质量安全监督管理办法》施行。该管理办法规定，销售生鲜食用农产品，不得使用对其真实色泽等感官性状造成明显改变的照明等设施误导消费者对商品的感官认知。然而，目前在“对食用农产品的真实色泽等感官性状造成明显改变”问题上暂无科学定量的判断标准，行业内也缺乏基于视觉实验验证的相关技术要求，导致政府监管及企业生产均无法可依。 本文件基于食用农产品色彩外观感知视觉实验数据，提出了食用农产品照明光源显色性技术要求，为政府部门监管提供技术依据，为灯具企业生产提供规范，保障消费者权益和行业良性发展。 本文件建立了基于食品真实色彩感知的生鲜食用农产品照明光源显色性规范，包括被照物观察面照度E、相关色温Tcp、普朗克轨迹色偏Duv、一般显色指数Ra、特殊显色指数R9、CIE 1931标准色度系统色品坐标（x，y）、颜色保真指数Rf和色域指数Rg要求。本文件适用于对呈现生鲜食用农产品真实色泽感官性状有需求的照明光源。

Specification for color rendition of light sources for fresh edible agricultural products

GSO IEC 63356-2:2024 LED 光源特性 第2部分：设计参数和值

IEC 63356-2:2022 specifies design parameters and design values of an LED light source or related interface characteristics. NOTE 1 Interface characteristics can cover interfaces between the LED light source and the luminaire or the controlgear, or the LED light source and additional attachments. NOTE 2 Interfaces can be related to for example electrical, mechanical, or optical aspects. This document does not cover interchangeability between products from different LED light source manufacturers. NOTE 3 Interchangeability is covered by IEC 63356-1. Lamp caps and lampholders specified in the IEC 60061 series are not within the scope of this document.

LED light source characteristics - Part 2: Design parameters and values

GSO IEC PAS 63324:2024 Zhaga 接口规范第 1 册和第 10 册

IEC PAS 63324:2020(E) This Book 10 defines interfaces between LED Modules, associate components (Holders) and luminaires. Not all interface descriptions are applicable to LED Modules or Holders, but where applicable they are identical. This Book 1 defines the common concepts that underlie the Zhaga interface specifications. In addition, this Book 1 specifies general requirements for Zhaga compliant components of LED Luminaires.

Zhaga interface specification Book 1 and Book 10

GSO IEC 63013:2024 LED 封装 长期发光和辐射通量维持预测

IEC 63013:2017 is applicable to LED packages for general lighting services. It specifies procedures and conditions for measuring the luminous flux maintenance of LED packages. It also provides the procedures and conditions (criteria) of projecting the long-term luminous flux maintenance based on limited luminous flux maintenance test data collected. Within the context of this document, wherever luminous flux measurement data is specified, radiant flux measurement data can also be used.

LED packages - Long-term luminous and radiant flux maintenance projection

GSO IEC TS 62972:2024 普通照明 有机发光二极管（OLED）产品和相关设备 术语和定义

IEC TS 62972:2016 establishes terms and definitions specific for general lighting OLED light sources and related equipment.

General lighting - Organic light emitting diode (OLED) products and related equipment - Terms and definitions

GSO IEC PAS 63329:2024 Zhaga 接口规范第 1 册和第 14 册

IEC PAS 63329:2020(E) This Book 14 defines three socketable LED Light Engines (with integrated Electronic Control Gears) and three socketable LED Modules (without integrated Electronic Control Gears). These LED Modules and LLEs have a rectangular shape and are typically applied in general lighting applications. These products are intended to be installed and replaced by professionals and non-professionals. This Book 1 defines the common concepts that underlie the Zhaga interface specifications. In addition, this Book 1 specifies general requirements for Zhaga compliant components of LED Luminaires.

Zhaga interface specification Book 1 and Book 14

GSO IEC TR 63425:2024 照明系统的连接

IEC TR 63425:2022(E) provides information and guidance on the connectivity aspects of lighting systems to operate and to interconnect with other systems. This document provides an overview of various connectivity solutions used within lighting systems, including topologies, communication protocols and related embedded functionalities. This document does not express preference for any specific topology or protocol.

Connectivity for lighting systems

GSO IEC 62868-2-2:2024 一般照明用有机发光二极管 (OLED) 光源 安全 第2-2部分：特殊要求 集成 OLED 模块

IEC 62868-2-2:2020 specifies the safety requirements for integrated organic light-emitting diode (OLED) modules for use on ripple free DC supplies up to 1000 V or AC supplies up to 1 000 V RMS at 50 Hz or 60Hz.

Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-2: Particular requirements - Integrated OLED modules

GSO IEC 63286:2024 一般照明用柔性有机发光二极管 (OLED) 面板 性能要求

IEC 632186:2022 specifies the performance requirements of flexible organic light emitting diode tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes and designed for being bent during the manufacturing process of curved luminaires.

Flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements

GSO IEC 63356-1:2024 LED 光源特性 第1部分：数据表

IEC 63356-1:2023 specifies data sheets of LED lamps and LED modules with a series of parameters per data sheet for a specific LED light source that enables interchangeability between products from different LED light source manufacturers. This second edition cancels and replaces the first edition published in 2022. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of datasheets for GH36d capped LED lamps; b) addition of datasheets for GJ6.6t and GJ6.6d-1 capped LED lamps; c) addition of datasheets for GR6d capped LED lamps.

LED light source characteristics - Part 1: Data sheets

GSO IEC 62868-2-3:2024 一般照明用有机发光二极管 (OLED) 光源 安全 第2-3部分：特殊要求 柔性 OLED 瓷砖和面板

IEC 62868-2-3:2021 specifies the safety requirements for flexible organic light emitting diode tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes and designed for being bent during the manufacturing process of curved luminaires.

Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-3: Particular requirements - Flexible OLED tiles and panels

GSO IEC 62442-3:2024 灯控制设备的能源性能 第3部分：卤钨灯和 LED 光源的控制设备 确定控制设备效率的测量方法

IEC 62442-3:2022 is available as IEC 62442-3:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62442-3:2022 defines measurement and calculation methods for specifying the efficiency and the standby power of controlgear for tungsten-halogen lamps and LED light sources. This third edition cancels and replaces the second edition published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - this edition has been harmonized with IEC 62442-1 and IEC 62442-­2; - the reference to and use of the measurement methods for non-active power consumption in accordance with IEC 63103 have been added.

Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear

T/CIES 033-2023 离网光伏路灯项目验收规范

我国离网光伏路灯产业经过近30年的发展，系统技术成熟，制造能力强大，迈入“可替代部分市电路灯”的新阶段。目前光伏组件转换效率不断提高，锂电池成为光伏路灯储能主力军，基本解决光伏路灯长寿命的储能需求；光伏路灯控制器与物联网结合技术日趋完善，形成数字控制管理平台模式。我国光伏路灯品种规格齐全，系统技术领先，成为国际新能源路灯制造与应用基地，进入标准化、国际化、智能化发展的新时期。 《离网光伏路灯项目验收规范》规定了离网光伏路灯项目验收的要求，适用于新建、扩建和改建的公路、城市道路、村镇道路。标准技术内容具备太阳能照明技术的系统性与完整性，代表了新能源照明技术的进步与发展趋势。

Acceptance specification of off-grid solar street luminaries project

T/CIES 032-2023 离网光伏路灯应用设计规范

本文件规定了离网光伏路灯应用设计规范，包括术语和定义、道路的分类分级、设计要求、通用要求、性能要求、铭牌和标注。

Specification for application design of off-grid solar street luminaries

T/CSA 075-2023 室外紫外LED灭蚊灯技术规范

LED作为新型光源，为害虫灯光诱控技术的发展注入了新的动力。LED波长范围窄、光色单一、亮度高、能耗低、寿命长，使之成为最佳的诱虫光源。LED灭蚊灯也作为重要的病媒监测、防治工具，应用范围越来越广泛。波长单一的 LED 光源不仅能够解决传统光源光谱范围广、害虫针对性差等缺点，在同样能耗情况下它的光强还较其他光源更强，灯光的覆盖面积更大，控害范围更广，大大提高了靶标害虫的诱集率，降低了对天敌和中性昆虫的潜在伤害。CSAS已针对此领域制定发布了一项技术报告T/CSA/TR 012—2023《LED光照的蚊虫诱灭应用技术报告》及一项室内应用标准T/CSA 073—2021《室内紫外LED诱蚊灯性能要求》。室外LED灭蚊灯的使用环境相对于室内更复杂，比如太阳光照、温度、湿度、气流等条件极易发生变化，诱捕效果相对于室内容易产生误差，且室外LED灭蚊灯需要综合考虑人畜安全性、靶标昆虫诱捕率（益害比）、环境适用性、防水要求等内容，基于此考虑，CSA组织制定T/CSA 075，规定了室外场所用紫外LED灭蚊灯的分类、技术要求和试验方法，适用于包括气味、CO2、温度等辅助LED紫外灭蚊方式的室外用灭蚊灯。

Technical Specifications for Outdoor UV LED Mosquito Killer Lamps

T/HNQA 019-2023 深海用半导体照明灯具技术规范

本文件规定了深海用半导体照明灯具的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Technical Specification for Semiconductor Lighting Lamps Used in Deep Sea

T/QGCML 2872-2023 孵蛋（取暖）灯

本文件规定了孵蛋（取暖）灯的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于孵蛋（取暖）灯的生产与验收。

Egg hatching (heating) lamp

IEC 63013:2017/AMD1:2021/AMD2:2023 CSV LED 封装 长期发光、辐射和光子通量维持

LED packages - Long-term luminous, radiant and photon flux maintenance