29.140.99 有关灯的其他标准 标准查询与下载

IEC 62386-253:2023 数字可寻址照明接口.第253部分:特殊要求.诊断和维护（设备类型52）

Digital addressable lighting interface - Part 253: Particular requirements - Diagnostics and maintenance (device type 52)

IEC 62386-251:2023 数字可寻址照明接口.第251部分:特殊要求.存储器组1扩展（设备类型50）

Digital addressable lighting interface - Part 251: Particular requirements - Memory bank 1 extension (device type 50)

IEC 62386-250:2023 数字可寻址照明接口.第250部分:特殊要求.集成电源（设备类型49）

Digital addressable lighting interface - Part 250: Particular requirements - Integrated power supply (device type 49)

IEC 62386-252:2023 数字可寻址照明接口.第252部分:特殊要求.能量报告（设备类型51）

Digital addressable lighting interface - Part 252: Particular requirements - Energy reporting (device type 51)

DB12/T 1202-2023 路灯智能单灯控制器应用及运行管理规范

Specifications for application and operation management of street lamp intelligent single lamp controller

DB12/T 1201-2023 路灯智能监控终端应用及运行管理规范

Specifications for application and operation management of street lamp intelligent monitoring terminal

IEC 62386-150:2023 数字可寻址照明接口-第150部分:特殊要求-辅助电源

Digital addressable lighting interface – Part 150: Particular requirements - Auxiliary power supply

23/30469474 DC BS EN IEC 62868-2-2 AMD 1. 一般照明用有机发光二极管 (OLED) 光源 安全 第 2-2 部分 特殊要求 集成OLED模组

BS EN IEC 62868-2-2 AMD 1. Organic light emitting diode (OLED) light sources for general lighting. Safety - Part 2-2. Particular requirements. Integrated OLED modules

23/30469470 DC BS EN IEC 62868-2-3 AMD 1. 一般照明用有机发光二极管 (OLED) 光源 安全 第 2-3 部分 特殊要求 柔性 OLED 瓷砖和面板

BS EN IEC 62868-2-3 AMD 1. Organic light emitting diode (OLED) light sources for general lighting. Safety - Part 2-3. Particular requirements. Flexible OLED tiles and panels

23/30469478 DC BS EN IEC 62868-2-1 AMD 1. 一般照明用有机发光二极管 (OLED) 光源 安全 第 2-1 部分 特殊要求 半集成OLED模组

BS EN IEC 62868-2-1 AMD 1. Organic light emitting diode (OLED) light sources for general lighting. Safety - Part 2-1. Particular requirements. Semi-integrated OLED modules

T/FSLA 007-2023 222nm远紫外线氪-氯准分子灯

本文件标准规定了紫外辐射主要波长为222 nm，标称功率为1000 W以下的氪-氯准分子灯的分类、要求、试验方法、检验规则、标志、包装、运输和贮存。

222nm Far Ultraviolet Krypton-Chlorine Excimer Lamp

23/30468947 DC BS EN 62276 用于表面声波 (SAW) 器件应用的单晶晶片 规格及测量方法

BS EN 62276. Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring methods

BS EN IEC 63356-1:2022 LED 光源特性 数据表

1   Scope This part of IEC 63356 specifies data sheets of LED lamps and LED modules with a series of parameters per data sheet for a specific LED light source that enables interchangeability between products from different LED light source manufacturers. Compliance criteria relating to data sheet parameters in this document are covered by IEC 63220 1 for safety, or IEC 63221 2 for performance.

LED light source characteristics - Data sheets

22/30466098 DC BS IEC 63128:2019 AMD1 用于调光的照明控制接口 用于电子电流源控制设备的模拟电压调光接口

BS IEC 63128:2019 AMD1. Lighting control interface for dimming. Analogue voltage dimming interface for electronic current sourcing controlgear

T/FSLA 008-2022 冰箱用紫外线消毒净味器

本标准规定了冰箱用紫外线消毒净味器的技术要求、试验方法、检验规则、包装、运输和贮存；提出了冰箱用紫外线消毒净味器的术语定义，环境储存试验、可靠性寿命试验、工作循环寿命试验、充电接口机械寿命试验等可靠性指标要求，产品的交收试验和例行试验检验规则，关于冰箱用紫外线消毒净味器涉汞安全指引的研究进展的资料性说明。

Ultraviolet sterilizer for refrigerator

T/ZZB 2935-2022 双端LED灯

本文件规定了双端LED灯的术语和定义、产品分类与命名、基本要求、技术要求、试验方法、检验规则、运输与贮存和质量承诺等。 本文件适用于： ——额定功率： 125 W 及以下； ——额定电压/频率： AC 220 V/50 Hz； ——标称长度为： 1 500 mm 及以下； ——光束角为： 120 °及以上的双端 LED 灯。 此类双端LED灯用于替换双端荧光灯而不需要对灯具进行任何改动。 装入替换用双端LED灯的现有灯具可以是含有电感或电子控制装置的灯具。 注： 除非有特别指明是其他类型的灯，在本文件中出现的“灯”代表“双端LED灯”。

Double-capped LED lamps

T/CASME 145-2022 紫外LED灭蚊灯

本文件规定了紫外LED灭蚊灯的的要求、试验方法、检验规则、标志、运输、包装和贮存。

Ultraviolet LED mosquito killing lamp

BS EN IEC 60810:2018+A2:2022 道路车辆用灯、光源和 LED 封装 性能要求

Lamps, light sources and LED packages for road vehicles. Performance requirements

BS EN IEC 63286:2022 用于普通照明的柔性有机发光二极管（OLED）面板 性能要求

This document specifies the performance requirements of flexible organic light emitting diode tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes and designed for being bent during the manufacturing process of curved luminaires. The requirements of this document relate only to type testing.

Flexible organic light emitting diode (OLED) panels for general lighting. Performance requirements

BS EN IEC 63356-2:2022 LED光源特性-设计参数及数值

This part of IEC 63356 specifies design parameters and design values of an LED light source or related interface characteristics. controlgear, or the LED light source and additional attachments. This document does not cover interchangeability between products from different LED light source manufacturers. Lamp caps and lampholders specified in the IEC 60061 series are not within the scope of this document. Compliance criteria relating to parameters in this document are covered by IEC 632201 for safety, or IEC 632212 for performance.

LED light source characteristics - Design parameters and values