29.160.01 旋转电机综合 标准查询与下载

GB/T 4772.3-1999 旋转电机尺寸和输出功率等级 第3部分;小功率装入式电动机 凸缘号BF10～BF50

本标准适用于控制装置等设备中使用的小功率装入式电动机，尺寸范围为凸缘号BF10～BF50。

Dimensions and output series for rotating electrical machines. Part 3: Samll built-in motors Flange numbers BF10 to BF50

GB/T 4772.2-1999 旋转电机尺寸和输出功率等级 第2部分;机座号355～1000和凸缘号1180～2360

本标准适用于以下三种专门型式之一的各类卧式旋转电机--底脚向下电机、底脚向上电机和带整块底板的电机，以及具有安装凸缘，且中心高转换为底脚向下型式为355～1000mm和固定凸缘基圆直径为1180～2360mm的电机。

Dimensions and output series for rotating electrical machines. Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360

BS EN IEC 60034-2-2:2024 旋转电机 通过测试确定大型机器单独损耗的具体方法 IEC 60034-2-1 的补充

Rotating electrical machines - Specific methods for determining separate losses of large machines from tests. Supplement to IEC 60034-2-1

BS EN IEC 60034-2-3:2024 旋转电机 确定变流器供电交流电机损耗和效率的特定测试方法

Rotating electrical machines - Specific test methods for determining losses and efficiency of converter-fed AC motors

BS EN IEC 60034-2-1:2024 旋转电机 通过测试确定损耗和效率的标准方法（牵引车辆除外）

Rotating electrical machines - Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

24/30436070 DC BS EN IEC 60034-18-41 旋转电机 第18-41部分：用于由电压转换器供电的旋转电机的无局部放电电气绝缘系统（I 型） 资格和质量控制测试

BS EN IEC 60034-18-41 Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests

T/CASME 1394-2024 TYK系列永磁同步电机

本文件规定了TYK系列永磁同步电机的型号、尺寸和输出功率等级、基本参数、要求、试验方法、检验规则及标志、使用说明书、包装、运输和贮存。

Tyk series permanent magnet synchronous motor

EN IEC 60034-30-3:2024 旋转电机 第30-3部分：高压交流电机的效率等级（IE 代码）

IEC 60034-30-3:2024 specifies efficiency classes for fixed-speed three-phase high-voltage cage induction motors in accordance with IEC 60034-1 that - have a rated voltage exceeding 1 000 V, but not exceeding 11 kV; - have a rated power from 200 kW to 2 000 kW; This document provides the global harmonization of energy-efficiency classes of three-phase cage induction motors with rated voltage above 1 000 V that are rated for direct online starting and fixed-speed operation at a 50 Hz or 60 Hz supply with sinusoidal voltage.

Rotating electrical machines - Part 30-3: Efficiency classes of high voltage AC motors (IE-code)

BS EN IEC 60034-27-2:2024 旋转电机 定子绕组绝缘的在线局部放电测量

Rotating electrical machines - On-line partial discharge measurements on the stator winding insulation

GSO IEC 60034-9:2024 旋转电机 第9部分：噪声限制

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: - standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level - rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) - rated speed not greater than 3 750 min–1 This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition: a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered. b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels. c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA. d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

Rotating electrical machines - Part 9: Noise limits

GSO IEC 60034-18-1:2024 旋转电机 第18-1部分：绝缘系统的功能评估 一般指南

IEC 60034-18-1:2022 deals with the general guidelines for functional evaluation of electrical insulation systems, used or proposed to be used in rotating electrical machines within the scope of IEC 60034-1, in order to qualify them. IEC 60034-18-1 defines general requirements on the qualification of insulation systems, where – for thermal ageing – the Arrhenius equations do not necessarily fit, according to many experiences. This third edition cancels and replaces the second edition published in 2010. This edition includes the following significant technical changes with respect to the previous edition: a. provides general guidelines for functional evaluation of different types of windings as before but incorporates those changes, which have been introduced for the electrical qualification and evaluation of windings which are electrically stressed by converter-supply; b. is now focused on general guidelines with all technical details of procedures and qualification principles moved to the subsequent parts; c. details additional general aspects of functional evaluation and qualification, particularly the procedure for comparison between reference and candidate insulation systems, the introduction of the concept of qualification for different expected life-times in service and the evaluation of minor component or manufacturing changes.

Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines

T/CAMAA 007-2023 客车压缩机电机技术要求

本文件规定了客车压缩机电机（以下简称电动机）的范围，规范性引用文件，术语和定义，型号命名与基本参数，技术要求，试验方法，检验规则，标志、包装、运输和贮存。 本文件适用于客车压缩机电机。

Technical requirements for passenger car compressor motors

T/CAMAA 006-2023 新能源客车用无刷蒸发风机技术要求

本文件规定了新能源客车用无刷蒸发风机的术语和定义，基本参数，技术要求，试验方法，检验规则，标志、包装、运输和贮存。 本文件适用于新能源客车用无刷蒸发风机。

Technical requirements for brushless evaporative fans for new energy buses

T/CAMAA 005-2023 电动车动力系统用电机技术要求

本文件规定了电动车动力系统用电机基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本文件适用于电动车动力系统用电机。

Technical requirements for motors used in electric vehicle power systems

23/30484351 DC BS EN IEC 60034-27-7 旋转电机 第27-7部分：旋转电机中用于密封和防潮绕组类型和质量控制测试的绝缘系统

BS EN IEC 60034-27-7 Rotating electrical machines - Part 27-7: Insulation systems used in rotating electrical machines for sealed and moisture resistant winding type and quality control tests

T/QGCML 1613-2023 纯电动拖轮推进系统永磁电机安装技术规范

本文件规定了纯电动拖轮推进系统永磁电机安装技术规范的总则、基本要求、保管、起吊及搬运、安装前准备、检查和安装、安装后检查与试运行、安装工程验收。 本文件适用于纯电动拖轮推进系统永磁式电机（以下简称“电机”）的安装。

Technical specifications for the installation of permanent magnet motors for pure electric tug propulsion systems

T/ZJDJ 012-2023 产品碳足迹核算与评价技术规范 旋转电机

前言　II 1  范围　 2  规范性引用文件　 3  术语和定义　 4  原则与框架　 5  核算目的与范围　 6  系统边界界定　 7  核算步骤与方法　 8  碳足迹核算方法　 9  产品碳足迹报告与披露　

Technical Specification For Evaluation of Carbon Foot Print of Products-Motor

GSO IEC TS 60034-27-5:2023 旋转电机 第27-5部分：重复脉冲电压下绕组绝缘局部放电起始电压的离线测量

IEC TS 60034-27-5:2021 provides an off-line measurement method of the partial discharge inception and extinction voltage on winding insulation under repetitive impulse voltage. This document is relevant to rotating machines supplied by a voltage source converter.

Rotating electrical machines - Part 27-5: Off-line measurement of partial discharge inception voltage on winding insulation under repetitive impulse voltage

IEC 60034-27-2:2023 PRV

23/30431968 DC BS EN IEC 60034-35 旋转电机 第35部分 电机用电气金属板材和金属带材的技术要求

BS EN IEC 60034-35. Rotating electrical machines - Part 35. Technical requirements for electrical sheet metal and strip metal used in electrical machines