29.160.01 旋转电机综合 标准查询与下载
共找到 601 条与 旋转电机综合 相关的标准，共 41 页
Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery
- ICS
- 29.160.01
- CCS
- 发布
- 2021-03-23
- 实施
This part of IEC 60034 provides a guideline of technical and economical aspects for the application of energy-efficient electric AC motors. It applies to motor manufacturers, OEMs (original equipment manufacturers), end users, regulators, legislators and other interested parties.
Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guidelines
- ICS
- 29.160.01
- CCS
- K20
- 发布
- 2021-03-00
- 实施
1 Scope This part of IEC 60034 defines criteria for assessing the insulation system of stator/rotor windings which are subjected to voltage-source pulse-width-modulation (PWM) drives. It applies to stator/rotor windings of single or polyphase AC machines with insulation systems for converter operation. It describes qualification tests and quality control (type and routine) tests on representative samples or on completed machines which verify fitness for operation with voltage source converters. This standard does not apply to: – rotating machines which are only started by converters; – rotating electrical machines with rated voltage ≤ 300 V r.m.s.; – rotor windings of rotating electrical machines operating at ≤ 200 V (peak).
Rotating electrical machines - Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters. Qualification and quality control tests
- ICS
- 29.160.01
- CCS
- 发布
- 2021-01-31
- 实施
- 2021-01-31
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (IEC 60034-5:2020)
- ICS
- 29.160.01
- CCS
- 发布
- 2021-01-25
- 实施
- 2021-01-25
Rotating electrical machines – Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters – Qualification and quality control tests
- ICS
- 29.160.01
- CCS
- 发布
- 2021-01-13
- 实施
- 2021-01-13
本文件确立了正弦波驱动电机的术语和定义、型号命名、型式与参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存。
Sine wave drive motor
- ICS
- 29.160.01
- CCS
- C381
- 发布
- 2021-01-12
- 实施
- 2021-06-08
This part of PNS IEC 60034 gives test procedures for the thermal evaluation and classification of insulation systems used or proposed for use in wire-wound alternating current (a.c.) or direct current (d.c.) rotating electrical machines.
Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification
- ICS
- 29.160.01
- CCS
- K20
- 发布
- 2021
- 实施
Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors (IEC 60034-2-3:2020)
- ICS
- 29.160.01
- CCS
- 发布
- 2020-12-18
- 实施
- 2020-12-18
Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests (IEC 60034-18-42:2017/A1:2020)
- ICS
- 29.160.01
- CCS
- 发布
- 2020-12-15
- 实施
- 2020-12-15
Rotating electrical machines – Part 34: AC adjustable speed rolling mill motors
- ICS
- 29.160.01
- CCS
- 发布
- 2020-11-27
- 实施
- 2020-11-27
This part of IEC 60034 is applicable to AC adjustable speed rolling mill motors and identifies specific requirements for AC adjustable speed rolling mill motors, where those performance characteristics are different from those for conventional AC motors.
Rotating electrical machines - Part 34: AC adjustable speed rolling mill motors
- ICS
- 29.160.01
- CCS
- 发布
- 2020-11-19
- 实施
Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
- ICS
- 29.160.01
- CCS
- 发布
- 2020-10-07
- 实施
Rotating electrical machines - Part 11: Thermal protection
- ICS
- 29.160.01
- CCS
- 发布
- 2020-10-05
- 实施
Rotating electrical machines - Part 11: Thermal protection
- ICS
- 29.160.01
- CCS
- 发布
- 2020-10-05
- 实施
Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests
- ICS
- 29.160.01
- CCS
- 发布
- 2020-08-18
- 实施
Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualific
- ICS
- 29.160.01
- CCS
- 发布
- 2020-08-18
- 实施
Rotating electrical machines — Part 12: Starting performance of single-speed three-phase cage induction motors
- ICS
- 29.160.01
- CCS
- 发布
- 2020-08-06
- 实施
Rotating electrical machines — Part 12: Starting performance of single-speed three-phase cage induction motors
- ICS
- 29.160.01
- CCS
- 发布
- 2020-08-06
- 实施
IEC 60034-3:2020 applies to large three-phase synchronous generators, having rated outputs of 10 MVA and above driven by steam turbines or combustion gas turbines. Also included are synchronous Mvar compensators of the same output range connected to a grid for the purpose of exchanging reactive power. This document supplements basic requirements for rotating machines given in IEC 60034-1. This seventh edition cancels and replaces the sixth edition published in 2007. This edition includes the following significant technical changes with respect to the previous edition: - title modified; - scope extended to synchronous compensators; - rotor overcurrent requirements added; - impact of stator harmonics on rotor unbalanced load capability introduced; - synchronisation requirements added; - adjustments of temperatures or temperature rise revised for gas turbine applications; - requirements for auxiliaries updated.
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
- ICS
- 29.160.01
- CCS
- 发布
- 2020-07-24
- 实施
- 2020-09-30 (7)
