共找到 981 条与 相关的标准,共 66 页
本标准规定了变电站数据通信网关机的功能要求,性能要求、其他技术要求及试验方法。本标准适用于35kV及以上电压等级的变电站数据通信网关机的设计.设备研制.试验及验收,发电厂相关数据通信网关机可参照执行。
Technical specifications for substation data communication gateway
本标准规定了智能变电站测控装置的技术要求、试验、检验规则、标志、包装、运输及贮存。本标准适用于智能变电站测控装置。
Technical specifications for measurement and control device in smart substation
本标准规定了电力软交换系统功能性能、互通协议一致性.业务质量.可靠性和环境适应性的测试方法和要求。本标准适用于电力软交换设备的型式试验.互联互通验证.出厂检验和工程验收。
Test specification on softswitch system of power industry
本标准规定了柔性直流输电工程系统试验的总则、站系统试验、端对端系统试验和试运行的要求。 本标准适用于对称单极、不对称单极和双极接线的端对端形式柔性直流输电工程。 其他形式的柔性直流输电工程也可参照使用。
System tests for the projects of high-voltage direct current (HVDC) transmission power using voltage sourced converters (VSC)
本标准规定了变电站内 10kV~35kV 标准化继电保护装置 (以下简称装置 )的技术要求、试验方法、检验规则及标志、包装、运输、贮存、供货的成套性、质量保证等要求。 本标准适用于变电站内 10kV~35kV 电压等级的线路、分段(母联)、站用变、接地变、电容器和电抗器等电气设备的微机型继电保护装置及安全自动装置,作为该类装置设计、制造、试验和运行的依据。 安装于其他场合的同类装置可参照执行。
General specification for 35kV and below voltage standardized protection equipment
本标准规定了微电网的分布式电源保护、电化学储能保护、变压器保护、并网点保护、线路保护、母线保护和安全自动装置应满足的技术要求。 本标准适用于 35kV 及以下电压等级的并网型交流微电网和独立型交流微电网。
Technical requirements for relay protection of microgrid
GB/T14598 的本部分规定了电力系统连续记录装置 (以下简称装置 )的技术要求、试验方法、检验规则、标识、包装、运输、贮存、供货的成套性、质量保证期限的要求。 本部分适用于变电站(换流站)、发电厂所用的电力系统连续记录装置,作为该类装置设计、制造、检验和运行的依据。
Technical requirements for power system continuous recorder
Operational evaluation index system for electric power communication network
Cyber security assessment guide for electric power system supervision and control
Technical guide for on-site ring network busbar protection
Technical specification for CT powered protection device
Technical specification for unattended substation monitoring and control system
Requirements of communication architecture and interface for substation equipments IOT
Technical specifications for modeling and coding fiber loop in smart substation
Technical requirements of PLC control device of power transformer cooling system
General specification for synchronous condenser unit protection equipment
Remote terminal unit equipment
本标准规定了10kV-35kV电压等级配电线路带电作业的一般要求、工作制度、作业方式、技术要求、工器具的试验及运输、作业注意事项和典型作业项目。 本标准适用于海拔4500m及以下地区10kV电压等级配电线路和海拔1000m及以下地区的20kV-35kV电压等级配电线路的带电检修和维护作业。 3kV、6kV线路的带电作业可参考本标准。 注:鉴于各地电气设备型式多样,杆上设备布置差异较大,作业项目种类较多,因此本标准在作业项目及操作方法上只做原则指导。
Technical guide for live working on distribution line
Technical specification for pre-insertion resistor of high- voltage direct current transmission using voltage sourced converters (VSC-HVDC)
Performance of high-voltage direct current power transmission system using voltage sourced converters (VSC-HVDC)—Part 2: Transient-state
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号