33.180.01 光纤系统综合 标准查询与下载

EN IEC 62129-3:2019 波长/光频率测量仪器的校准 第3部分：内部参考频率梳的光频率计

IEC 62129-3:2019 describes the calibration of optical frequency meters using an optical frequency comb as an internal reference. It is applicable to instruments measuring the optical frequency emitted from sources that are typical for the fibre-optic communications industry. It is assumed that the optical radiation will be coupled to the optical frequency meter by a single-mode optical fibre. This document is part of the IEC 62129 series on the calibration of wavelength/optical frequency measurement instruments. Refer to IEC 62129­1 [3] for the calibration of optical spectrum analyzers, and refer to IEC 62129-2 [4] for calibration of Michelson interferometer single wavelength meters. This first edition cancels and replaces IEC TS 62129-3, published in 2014. This edition includes the following significant technical changes with respect to the previous edition: a) text has been added to 5.2.3 about calibration at a second optical frequency; b) Annex D is now normative; c) Subclause 4.2 has been improved; d) measurement method of frequency has been moved to Annex B; e) example of optical frequency comb has been moved to Annex C; f) frequency-dependence uncertainty has been moved to Annex D. Keywords: calibration of optical frequency meters

Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb

IEC 62129-3:2019 波长/光学频率测量仪器的校准.第3部分:内部参考频率梳的光学频率计

Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb

IEC 62496-4-1:2019 光电路板.第4-1部分:接口标准.使用单列十二通道PMT连接器的端接波导OCB组件

This part of IEC 62496-4 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as assembly) using single-row twelve channel polymer waveguides for a PMT connector and a waveguide OCB that can be interconnected with a terminated MT ferrule.

Optical circuit boards - Part 4-1: Interface standards – Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors

YD/T 2904.2-2018 集成可调谐激光器组件 第2部分：小型化组件

Integrated Tunable Laser Components Part 2: Miniaturized Components

YD/T 3344.1-2018 接入网络技术要求 40Gbit/s 无源光网络（NG-PON2) 第1部分：总体要求

Access network technical requirements 40Gbit/s passive optical network (NG-PON2) Part 1: General requirements

YD/T 2799.3-2018 集成相干光接收器技术条件 第3部分：100Gbit/s小型化

Technical conditions for integrated coherent optical receivers Part 3: 100Gbit/s miniaturization

YD/T 3357.1-2018 100Gb/s QSFP28 光收发合一模块 第1部分：4×25Gb/s SR4

100Gb/s QSFP28 optical transceiver module Part 1: 4×25Gb/s SR4

YD/T 3358.1-2018 双通道光收发合一模块 第1部分：2×10Gb/s

Dual-channel optical transceiver module Part 1: 2×10Gb/s

YD/T 2969.3-2018 100Gbit/s双偏振正交相移键控（DP-QPSK)光收发模块 第3部分：CFP2-ACO光模块

100Gbit/s dual polarization quadrature phase shift keying (DP-QPSK) optical transceiver module Part 3: CFP2-ACO optical module

YD/T 3394-2018 光无源器件动态监测方法

Dynamic monitoring method of optical passive devices

YD/T 3356.1-2018 100Gb/s及以上速率光收发组件 第1部分：4×25Gb/s CLR4

Optical transceiver components for 100Gb/s and above Part 1: 4×25Gb/s CLR4

YD/T 2153-2018 光性能监测功能模块（OPM)

Optical performance monitoring module (OPM)

YD/T 1351-2018 粗波分复用光收发合一模块

本标准规定了粗波分复用光收发合一模块的术语、定义、标称中心波长位置、光接口技术要求、电接口技术要求及极限条件、可靠性试验分类和试验方法、产品检验和管理等。 本标准适用于光通道间隔20nm的粗波分复用光收发合一模块(简称为CWDM光模块)。模块承载信号为千兆比以太网信号或2.5G SDH信号，其他的数据格式或速率可以参照执行。

Technical requirement and test methods of optical transceiver module for coarse wavelength division multiplexing system

YD/T 3357.2-2018 100Gb/s QSFP28 光收发合一模块 第2部分：4×25Gb/s LR4

100Gb/s QSFP28 optical transceiver module Part 2: 4×25Gb/s LR4

YD/T 1688.9-2018 xPON光收发合一模块技术条件 第9部分：用于XGS-PON光线路终端/光网络单元（OLT/ONU)的光收发合一模块

xPON optical transceiver module technical conditions Part 9: Optical transceiver module for XGS-PON optical line terminal/optical network unit (OLT/ONU)

YD/T 986-2018 155Mb/s和622Mb/s光收发合一模块

155Mb/s and 622Mb/s optical transceiver module

YD/T 1813.1-2018 通信用光纤放大器 泵浦激光器组件 第1部分：980nm 泵浦激光器组件

Fiber amplifier pump laser components for communications Part 1: 980nm pump laser components

YD/T 2969.2-2018 100Gbit/s双偏振正交相移键控（DP-QPSK)光收发模块 第2部分：CFP相干光模块

100Gbit/s dual polarization quadrature phase shift keying (DP-QPSK) optical transceiver module Part 2: CFP coherent optical module

YD/T 3433-2018 用于OTDR测试的ONU光模块内置波长选择性反射器技术要求和测试方法

Technical requirements and test methods for built-in wavelength selective reflectors in ONU optical modules for OTDR testing

YD/T 1688.6-2018 xPON光收发合一模块技术条件 第6部分：用于NG-PON2堆叠式光线路终端/光网络单元（OLT/ONU)的光收发合一模块

xPON optical transceiver module technical conditions Part 6: Optical transceiver module for NG-PON2 stacked optical line terminal/optical network unit (OLT/ONU)