33.180.20 纤维光学和光学互连器件 标准查询与下载
共找到 3543 条与 纤维光学和光学互连器件 相关的标准，共 237 页
本标准规定了当器件经受环境试验（基本试验）时测量它衰减变化和回波损耗变化的程序。因为通常这类试验在某些时间周期内对一组器件进行试验，所以就将这种测量程序和相关的设备设计为在同一程序中对许多器件进行监测并采用自动数据采集装置。而且，由于器件衰减变化和回波损耗变化可能很小，而系统中这些器件的性能又很重要，因此强调本测量程序应始终保持测量的高稳定性。
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-3: Examinations and measurements--Monitoring change in attenuation and in return loss (multiple paths)
- ICS
- 33.180.20
- CCS
- L50
- 发布
- 2001-02-13
- 实施
- 2001-08-01
本标准旨在确定纤维光学器件承受实际使用、贮存和（或）运输中可能遇到的持续高温（干热）环境条件下的适应性。本标准不适用于评定上述器件在温度变化期间的承受能力和工作能力（对此情况，见IEC 61300-2-22）
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-18: Tests-dry heat-high temperature endurance
- ICS
- 33.180.20
- CCS
- L50
- 发布
- 2001-02-13
- 实施
- 2001-08-01
本标准适用于带有连接器和（或）面板安装用整套连接器的纤维光学器件。本程序目的是保证整套连接器在正常使用期间承受住将会到的剪切力。这一剪切力可能被施加于整套连接器上、器件的壳体上或其他规定的部分。
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-3: Tests--Static shear load
- ICS
- 33.180.20
- CCS
- L50
- 发布
- 2001-02-13
- 实施
- 2001-08-01
本标准目的是对光纤光缆连接器或其他互连器件经受一系列连续接合和分离循环后的效应进行评定。
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-2: Tests--Mating durability
- ICS
- 33.180.20
- CCS
- L50
- 发布
- 2001-02-13
- 实施
- 2001-08-01
本标准的目的是确保整套连接器或连接器与器件组合的锁紧机构能承受其正常使用中可能遇到的轴向拉力。
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-6: Tests--Tensile strength of coupling mechanism
- ICS
- 33.180.20
- CCS
- L50
- 发布
- 2001-02-13
- 实施
- 2001-08-01
GB/T 18309系列标准规定了一系列环境试验程序和测量程序，并给出了某些场合为评定纤维光学互连器件和无源器件在预期工作条件下工作的能力而设定的优先严酷等级。GB/T 18309系列标准除应用于这一范围外，还可用于需要的其他领域。 本标准与详细规范一起使用。详细规范中将规定所采用的试验及每项试验中所需的严酷等级、试验顺序，如适用，并提供允许的性能极限值。在本标准与详细规范出现矛盾时，应以详细规范中规定为准。
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 1: General and guidance
- ICS
- 33.180.20
- CCS
- L50
- 发布
- 2001-02-13
- 实施
- 2001-08-01
本标准规定了当外界磁场施加到器件上时对其光学性能变化的敏感性进行测量的试验方法。
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-39: Tests-Susceptibility to external magnetic fields
- ICS
- 33.180.20
- CCS
- L50
- 发布
- 2001-02-13
- 实施
- 2001-08-01
本标准目的是保证光纤/光缆与纤维光学器件连接能承受正常使用中可能遇到的拉力。
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-4: Tests--Fibre/cable retention
- ICS
- 33.180.20
- CCS
- L50
- 发布
- 2001-02-13
- 实施
- 2001-08-01
本规范适用于各种类型、尺寸和结构的光纤光缆用整套连接器和各个单独器件（例如转接器、插头、插座）。其中包括： ——整套连接器的要求； ——质量评定程序； ——整套连接器和各个单独器件（例如转接器、插头和插座）的测量和试验程序。
Connectors for optical fibres and cables--art 1: Generic specification
- ICS
- 33.180.20
- CCS
- L23
- 发布
- 2000-01-03
- 实施
- 2000-08-01
本标准规定了光纤熔接机（以下简称熔接机）的要求、试验方法、检验规则及包装、标志、运输、贮存等。 本标准适用于各种类型光纤熔接机。
General specification for optical fibre fusion splicers
- ICS
- 33.180.20
- CCS
- L23
- 发布
- 1998-11-17
- 实施
- 1999-06-01
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - General and guidance
- ICS
- 33.180.20
- CCS
- 发布
- 2024-06-30
- 实施
- 2024-06-30
BS EN IEC 62149-4/AMD Fibre optic active components and devices - Performance standards - Part 4. 1 300 nm fibre optic transceivers for Gigabit Ethernet application
- ICS
- 33.180.20
- CCS
- 发布
- 2024-06-07
- 实施
- 2024-06-07
1 Scope This part of IEC 63267 defines the dimensional limits of an optical interface for reference connections necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled and angled polished multimode reference connectors intended to be used for attenuation measurements in the field or factory. Several grades of reference connections are defined in this document. The multimode reference connections are terminated to restricted IEC 60793‑2‑10 A1-OM2b to A1-OM5b fibre at the 850 nm band only. The geometrical dimensions and tolerances of the specified reference connections have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors, and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory.
Fibre optic interconnecting devices and passive components. Connector optical interfaces for enhanced macro bend multimode fibres - Connection parameters of physically contacting 50 μm core diameter fibres. Non-angled and angled for reference…
- ICS
- 33.180.20
- CCS
- 发布
- 2024-05-31
- 实施
- 2024-05-31
1 Scope This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches need to satisfy in order to be categorized as meeting the requirements of category C – controlled environments, as defined in Annex A of IEC 61753‑1:2018.
Fibre optic interconnecting devices and passive components. Performance standard - Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C. Controlled environments
- ICS
- 33.180.20
- CCS
- 发布
- 2024-05-31
- 实施
- 2024-05-31
BS EN IEC 61300-1/AMD2 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Part 1. General and guidance
- ICS
- 33.180.20
- CCS
- 发布
- 2024-05-24
- 实施
- 2024-05-24
BS EN IEC 61300-3-52 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Part 3-52: Examinations and measurements. Guide hole and alignment pin deformation constant for angled physically…
- ICS
- 33.180.20
- CCS
- 发布
- 2024-05-17
- 实施
- 2024-05-17
BS EN IEC 61300-2-37 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic protective housings and hardened connectors
- ICS
- 33.180.20
- CCS
- 发布
- 2024-05-10
- 实施
- 2024-05-10
本文件规定了光模块用LC光接口Receptacle转接连接器的术语和定义、分类和型号、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。
LC optical interface Receptacle transfer connector for optical transceiver modules
- ICS
- 33.180.20
- CCS
- M732
- 发布
- 2024-05-09
- 实施
- 2024-06-09
BS EN IEC 61300-2-2. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Part 2-2. Tests. Mating durability
- ICS
- 33.180.20
- CCS
- 发布
- 2024-05-09
- 实施
- 2024-05-09
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Tests. Flexing of the strain relief of fibre optic devices and components
- ICS
- 33.180.20
- CCS
- 发布
- 2024-04-30
- 实施
- 2024-04-30
