33.180.30 光纤放大器 标准查询与下载

DIN EN 61290-1-3:2015 光学放大器.试验方法.第1-3部分:光功率参数和增益参数.光功率计法(IEC 61290-1-3-2015);德文版本EN 61290-1-3-2015

Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2015); German version EN 61290-1-3:2015

EN 62343-1-2:2015 动态模块 第 1-2 部分：性能标准 可调色散补偿器（非连接器）

IEC 62343-1-2:2015 contains the recommended minimum initialization test and measurement requirements and severities for optical tuneable chromatic dispersion compensators (TDC). This second edition cancels and replaces the first edition published in 2007. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - substantial addition of definitions and removal of type C performances; - change in the title to reflect standard terminology. Keywords: optical tuneable chromatic dispersion compensators (TDC)

Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized)

DIN EN 61290-1:2015 光放大器.试验方法.第1部分:功率和增益参数(IEC 61290-1-2014);德文版本EN 61290-1-2015

Optical amplifiers - Test methods - Part 1: Power and gain parameters (IEC 61290-1:2014); German version EN 61290-1:2015

YD/T 2973-2015 远程泵浦光放大器

Remote pump optical amplifier

DIN EN 62343-5-1:2015 动态模块.试验方法.第1-5部分:动态增益倾斜均衡器.响应时间测量 (IEC 62343-5-1-2014);德文版本 EN 62343-5-1-2015

Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement (IEC 62343-5-1:2014); German version EN 62343-5-1:2015

DIN EN 62148-18:2015 纤维光学有源元件和器件. 包装和接口标准. 第18部分: 在LC型连接器中使用的40-Gbit/s串行发射器和接收器组件 (IEC 62148-18-2014); 德文版本EN 62148-18-2015)

Fibre optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector (IEC 62148-18:2014); German version EN 62148-18:2015

BS EN 61290-1-1:2015 光纤放大器.试验方法.第1-1部分:功率和增益参数.光学频谱分析仪法

Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method

EN 61290-1-1:2015 光放大器 测试方法 第 1-1 部分：功率和增益参数 光谱分析仪方法

IEC 61290-1-1:2015(E) applies to all commercially available optical amplifiers (OAs) and optically amplified modules. It applies to OAs using optically pumped fibres (OFAs based on either rare-earth doped fibres or on the Raman effect), semiconductor OAs (SOAs) and planar optical waveguide amplifiers (POWAs). The object of this standard is to establish uniform requirements for accurate and reliable measurements, by means of the optical spectrum analyzer test method, of the following OA parameters, as defined in IEC 61291-1: - nominal output signal power; - gain; - polarization-dependent gain; - maximum output signal power; - maximum total output power. The object of this standard is specifically directed to single-channel amplifiers. For multichannel amplifiers, one should refer to the IEC 61290-10 series. This third edition cancels and replaces the second edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: updates on the characteristics of measurement apparatus and revised list of addressed optical amplifier parameters. Keywords: optical amplifiers, optical spectrum analyzer test, single-channel amplifiers

Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method

BS EN 61290-1-3:2015 光学放大器.试验方法.功率和增益参数.光功率计法

Optical amplifiers. Test methods. Power and gain parameters. Optical power meter method

EN 61290-1-3:2015 光放大器 测试方法 第 1-3 部分：功率和增益参数 光功率计法

IEC 61290-1-3:2015 applies to all commercially available optical amplifiers (OA) and optically amplified subsystems. It applies to OA using optically pumped fibres (OFA based on either rare-earth doped fibres or on the Raman effect), semiconductors (SOA), and waveguides (POWA). The object of this part of IEC 61290-1 is to establish uniform requirements for accurate and reliable measurements, by means of the optical power meter test method, of the following OA parameters, as defined in IEC 61291-1: - nominal output signal power; - gain; - polarization-dependent gain; - maximum output signal power; - maximum total output power. All numerical values followed by (‡) are suggested values for which the measurement is assured. Other values may be acceptable but should be verified. This part of IEC 61290-1 applies to single-channel amplifiers. For multichannel amplifiers, the IEC 61290-10 series applies. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Detail description of most parameters has been described in IEC 61290-1 and removed from this part; - Description of maximum output signal power and maximum total output power are added. Keywords: optical amplifiers (OA), single-channel amplifiers, optical power meter test method

Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method

IEC 62343-1-2:2015 动态模块. 第1-2部分: 性能标准. 可调谐色散补偿器 (非连接式)

This part of IEC 62343 contains the recommended minimum initialization test and measurement requirements and severities for optical tuneable chromatic dispersion compensators (TDC).

Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized)

DIN EN 62343-2:2015 动态模块.第2部分:可靠性鉴定(IEC 62343-2-2014).德文版EN 62343-2-2014

Dynamic modules - Part 2: Reliability qualification (IEC 62343-2:2014); German version EN 62343-2:2014

IEC 61290-1-1:2015 光学放大器.试验方法.第1-1部分:功率和增益参数.光频谱分析仪法

Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method

IEC 61290-4-3:2015 光放大器. 试验方法. 第4-3部分: 功率瞬态参数. 输出功率控制中的单通道光放大器

This part of IEC 61290 applies to output power controlled optically amplified@ elementary subsystems. It applies to optical fibre amplifiers (OFA) using active fibres containing rare-earth dopants@ presently commercially available@ as indicated in IEC 61291-1@ as well as alternative optical amplifiers that can be used for single channel output power controlled operation@ such as semiconductor optical amplifiers (SOA). The object of this standard is to provide the general background for optical amplifier (OA) power transients and its measurements and to indicate those IEC standard test methods for accurate and reliable measurements of the following transient parameters: a) Transient power response b) Transient power overcompensation response c) Steady-state power offset d) Transient power response time The stimulus and responses behaviours under consideration include: 1) Channel power increase (step transient) 2) Channel power reduction (inverse step transient) 3) Channel power increase eduction (pulse transient) 4) Channel power reduction/increase (inverse pulse transient) 5) Channel power increase eduction/increase (lightning bolt transient) 6) Channel power reduction/increase eduction (inverse lightning bolt transient) These parameters have been included to provide a complete description of the transient behaviour of an output power transient controlled OA. The test definition defined here are applicable if the amplifier is an OFA or an alternative OA. However@ the description in Annex A of this document concentrates on the physical performance of an OFA and provides a detailed description of the behaviour of OFA; it does not give a similar description of other OA types.

Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control

JIS C 6123-4:2015 光学放大器.性能规范模板.第4部分:多通道设备用光学放大器

Optical amplifiers -- Performance specification template -- Part 4: Optical amplifiers for multichannel applications

JIS C 6123-1:2015 光放大器. 性能规格模板. 第1部分: 单通道应用的光放大器

Optical amplifiers -- Performance specification template -- Part 1: Optical amplifiers for single channel applications

DIN EN 61290-10-5:2015 光放大器 测试方法 第 10-5 部分：多通道参数 分布式拉曼放大器增益和噪声系数（IEC 61290-10-5:2014）；德文版 EN 61290-10-5:2014

Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure (IEC 61290-10-5:2014); German version EN 61290-10-5:2014

DIN EN 62343-3-3:2015 动态模块 第 3-3 部分：性能规范模板 波长选择开关（IEC 62343-3-3:2014）；德文版 EN 62343-3-3:2014

Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches (IEC 62343-3-3:2014); German version EN 62343-3-3:2014

DIN EN 62148-15:2015 光纤有源元件及器件.封装和接口标准.第15部分:离散垂直型控表面发射激光封装(IEC 62148-15-2014).德文版本EN 62148-15-2014

Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages (IEC 62148-15:2014); German version EN 62148-15:2014

DIN EN 62149-2:2015 纤维光学有源元件和器件.性能标准.第2部分:850mm离散垂直空腔表面发射激光器封装件

Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices (IEC 62149-2:2014); German version EN 62149-2:2014