35.200 接口和互连设备 标准查询与下载

T/SUCA 031-2022 高级数字内容保护系统技术规范 第一部分：统一多媒体互联接口内容保护技术规范

本文件规定了在统一多媒体互联接口（UMMI）接口上安全传输数字内容的技术要求，包括设备认证及密钥协商、授权控制、内容加解密、信任体系等内容。

Technical Specification of Advanced Digital Content Protection System Part I: Technical Specification of Content Protection for UMMI

IEC 62680-1-2:2022 用于数据和电源的通用串行总线接口 第 1-2 部分：通用组件 USB 供电规范

Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification

IEC 62680-1-3:2022 用于数据和电源的通用串行总线接口 第 1-3 部分：通用组件 USB Type-C 电缆和连接器规范

Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C？ cable and connector specification

KS X ISO/IEC 14776-341-2022 信息技术 小型计算机系统接口-3(SCSI-3) 第341部分：控制器命令(SCC)

Information technology－Small Computer System Interface-3(SCSI-3)－Part 341：Controller Commands(SCC)

KS X 4505-1-2022 智能家居网络复杂服务器协议 第1部分：基础协议

The complex server protocol for intelligent home network－Part 1：Base protocol

KS X 4505-2-2022 智能家庭网络复杂服务器协议 第2部分：家庭网关/Wallpad简介

The complex server protocol for intelligent home network－Part 2：Profile for home gateway/wallpad

KS X ISO/IEC 14776-342-2022 信息技术 小型计算机系统接口 第342部分：控制器命令-2(SCC-2)

Information technology－Small Computer System Interface－Part 342：Controller Commands-2(SCC-2)

KS X ISO/IEC 9318-3-2022 信息技术 智能外设接口 第3部分：磁盘和光盘驱动器设备通用命令集

Information technology－Intelligent Peripheral Interface－Part 3：Device generic command set for magnetic and optical disk drives

KS X ISO/IEC 9318-4-2022 信息技术 智能外设接口 第4部分：磁带机设备通用命令集

Information technology－Intelligent Peripheral Interface－Part 4：Device generic command set for magnetic tape drives

ASTM F1221-89(2022) 机构间信息交换的标准指南

1.1 This guide covers the planning, operations, and evaluation phases of interagency communications as part of a comprehensive EMS system. 1.2 This is a guide for interagency communications within an EMS system. Interagency communications involves the EMS responder and support agencies whose primary mission is not to deliver prehospital emergency medical care. 1.3 The primary focus of this guide is to address interagency communications necessary for ongoing EMS responses. 1.4 The guide also addresses interagency communications in any major EMS incident, including man-made or natural disasters. 1.5 The recommendations for drills/exercises for the evaluation of interagency communications during an EMS event are also incorporated into this guide. 1.6 Additional information can be found in Guide F1220 and Refs (1-5).2 1.7 The sections in this guide appear in the following sequence: Section Introduction Scope 1 Referenced Documents 2 Terminology 3 Significance and Use 4 Procedure 5 Rationale Appendix X1 Keywords 6 References 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This guide is under the jurisdiction of ASTM Committee F30 on Emergency Medical Services and is the direct responsibility of Subcommittee F30.04 on Communications. Current edition approved Sept. 1, 2022. Published September 2022. Originally approved in 1989. Last previous edition approved in 2014 as F1221 – 89 (2014). DOI: 10.1520/F1221-89R22. 2 The boldface numbers in parentheses refer to the references at the end of this guide. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Interagency Information Exchange

ISO/IEC 14763-4:2021/Cor 1:2022 信息技术.用户房屋布线的实施和操作.第4部分：端到端（E2E）链路、模块化插头端接链路（MPTL）和直接连接布线的测量.技术勘误1

Information technology — Implementation and operation of customer premises cabling — Part 4: Measurement of end-to-end (E2E) links, modular plug terminated links (MPTLs) and direct attach cabling — Technical Corrigendum 1

T/JSGS 009-2022 灌区监测数据交换规约

前  言　I 引  言　II 1  范围　3 2  规范性引用文件　3 3  术语和定义　3 4  总体要求　4 5  技术要求　4 6  数据协议　4 7  服务交换流程　6 附录A（规范性）灌区编码规定　7 附录B（规范性）类别编码表　8 附录C（规范性）监测站点指标分类表　9

Protocols for irrigated monitoring data exchange

BS ISO/IEC 30118-3:2021 信息技术 开放连接基金会 (OCF) 规范 桥接规范

1   Scope This document establishes an ergonomic model for any cyclical human work planned and executed in an industrial competitive environment. It also covers the process of measuring work based on the concept of normal work performance and of the assessment of risk factors commonly associated with body postures, body or hand forces, manual material handling of loads and handling low loads at high frequency. This document applies to the adult working population and is intended to give reasonable protection for nearly all healthy adults. Those areas concerning health risks and control measures are mainly based on experimental studies regarding musculoskeletal loading, discomfort or pain and endurance or fatigue related to work organization and methods. The scope of this document is any cyclical human work planned and executed in an industrial competitive environment. The most typical cases are within industries where there is the need to define an expected output (products or services) based on the optimization of the trade-off between labour productivity and health and safety. The most sensitive organizations to this proposal are those within labour-intensive manufacturing industries with series and batch production systems: — automotive (original equipment manufacturer and tier 1 and 2 suppliers); — industrial automotive (trucks, buses, agricultural and mining equipment);

Information technology. Open Connectivity Foundation (OCF) Specification - Bridging specification

T/SZBD 001-2022 基于国家健康扶贫动态管理系统的多源数据接口标准

本文件规定了基于国家健康扶贫动态管理系统的多源数据接口标准的术语和定义、概述、关键参数、接口设计、交易信息结构定义。

Multi source data interface standard based on national health poverty alleviation dynamic management system

T/JSQX 0006-2022 道路交通标志数据采集接口规范

道路交通标志数据采集整体由交通电子标志、道路交通电子标志控制系统、车联网数据交换平台、车联网终端、车联网设备身份认证平台五部分组成。本标准规定了道路交通标志数据采集的接口形式、交换过程、通信方式，可变信息标志、可变车道行驶方向标志、可变限速标志、停车场诱导标志、交通诱导可变信息屏等的数据格式与消息内容。

Interface Specification for Data Acquisition of Road Traffic Signs

T/JSQX 0004-2022 道路交通信号机数据采集接口规范

本标准规定了道路交通信号机数据采集系统的接口要求规范，包括从道路交通信号机及控制系统进行数据采集的接口要求、格式要求、认证要求及同步要求等。规定了道路交通信号机的数据接口形式和交换的过程，通用报文格式以及报文的具体规定细则，以及道路交通信号机数据中的数据通讯方式和协议。

Data acquisition interface specification for road traffic signal

T/JSQX 0008-2022 激光雷达数据采集接口规范

激光雷达数据采集整体由路侧系统、车联网数据交换平台、车联网终端、车联网设备身份认证平台四部分组成。本标准规定了激光雷达数据通信要求、激光雷达与路侧通信单元的数据接口格式、路侧通信单元与数据交换平台的数据接口格式。

LiDAR Data Acquisition Interface Specification

T/JSQX 0010-2022 车辆基础数据采集接口规范

车辆基础数据采集整体由车辆数据中台、车联网数据交换平台、车联网终端、车联网设备身份认证平台四部分组成。本标准规定了车联网数据交换平台、车辆数据中台、车联网终端相互之间的接口形式和数据交换过程、车辆基础数据同步接口格式。

Vehicle Basic Data Acquisition Interface Specification

T/JSQX 0009-2022 毫米波雷达数据采集接口规范

毫米波雷达数据采集整体由路侧系统、车联网数据交换平台、车联网终端、车联网设备身份认证平台四部分组成。本标准规定了毫米波雷达数据通信要求、毫米波雷达与路侧通信单元通信的接口格式、路侧通信单元与数据交换平台的数据接口格式。

Millimeter wave radar data acquisition interface specification

T/JSQX 0005-2022 停车场数据采集接口规范

规定了停车场信息服务云平台、停车场管理系统、车联网数据交换平台、车联网终端之间之间数据交互的组网结构、系统框架，规范了停车场信息服务云平台、停车场管理系统、车联网数据交换平台、车联网终端之间的数据接口形式和交换方式，停车场信息服务云平台、停车场管理系统数据采集相关的登录认证、进场、出场、空位等数据信息的接口格式。

Parking lot data acquisition interface specification