37.100.10 标准查询与下载
共找到 739 条与 相关的标准，共 50 页
Information technology — Method for the determination of ink cartridge yield for monochrome inkjet printers and multi-function devices that contain inkjet printer components
- ICS
- 37.100.10
- CCS
- 发布
- 2019-12-16
- 实施
Image quality evaluation methods for printed matter — Part 11: Colour gamut analysis
- ICS
- 37.100.10
- CCS
- 发布
- 2019-12-13
- 实施
1.1 These test methods cover the measurement of the adherence of the release liner to the adhesive of a pressuresensitive adhesive label. 1.2 These test methods provide means of assessing the uniformity of the adhesion to the liner of a given type of pressure-sensitive label. The assessment may be within a sheet or roll between sheets or rolls or between production lots. 1.3 Variation in the label backing, liner, liner release coating, adhesive, and adhesive coating weight, affect the response. Therefore, these methods cannot be used to pinpoint the specific cause(s) of nonuniformity. 1.4 These test methods may not be appropriate to test labels having either relatively stiff backings or stiff liners, or backings showing high stretch at low forces. These characteristics will result in a high variability of the test response that is not a true indication of the real nature of the adhesive bond. 1.5 The values stated in either SI or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently, without combining values in any way. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
- ICS
- 37.100.10
- CCS
- 发布
- 2019-08-01
- 实施
1.1 This practice covers a procedure for determining the abrasion resistance of printed materials using the Sutherland Rub Tester, or its equivalent, equipped with full-width rubber pads and using standardized receptors. 1.2 This practice is applicable to labels, folding cartons, corrugated boxes, inserts, circulars, and other packaging materials having applied graphics on a flat substrate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
- ICS
- 37.100.10
- CCS
- 发布
- 2019-08-01
- 实施
主要技术内容规定了：结构型式、型号、参数及安装要求、电子轴凹印机使用性能、装配精度、控制系统、外观质量、整机运行质量、机械安全、电气安全、装配精度检验、控制系统检验、外观质量检验、机械安全检验、电气安全检验、 整机运行质量检验、 印刷试验、 使用性能检测、套印精密度检测、附着力检测方法、残留溶剂检验方法、废料长度检验、外观检验、操作检验、气路水路系统检验、检验规则、出厂检验、型式试验、标志、标签、产品标志、包装标志、产品使用说明书、包装、运输、贮存等方面的技术要求和检测方法。具体技术内容见于标准文本。
Electronic shaft multi-color gravure printing machin
- ICS
- 37.100.10
- CCS
- C231
- 发布
- 2019-07-09
- 实施
- 2019-07-09
本标准规定了单张纸平版印刷机 全张及以上幅面（以下简称印刷机）的术语和定义、基本参数、基本要求、试验方法、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本标准适用于单张纸单面印刷型式的印刷机，带翻转印刷功能的印刷机可参照使用。 本标准不适用于单张纸双面平版印刷机。
Sheet-fed offset press-Large format
- ICS
- 37.100.10
- CCS
- C354
- 发布
- 2019-05-15
- 实施
- 2019-05-17
本标准规定了紫激光型高速精密数字直接制版机的术语和定义、型式及基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于紫激光型高速精密数字直接制版机（以下简称制版机）。
Precision high-speed digital violet laser direct plate setter
- ICS
- 37.100.10
- CCS
- C354
- 发布
- 2019-04-18
- 实施
- 2019-05-05
Test methods of remanufactured toner catridge
- ICS
- 37.100.10
- CCS
- 发布
- 2019-01-29
- 实施
This document provides directions for measuring and calculating the electricity consumption of any format of digital production press, whose modes, other than production printing mode, play a significant role in the comprehensive energy consumption. It excludes digital presses designed to print substrates other than paper or plastic and conventional printing presses fitted with digital inkjet printing heads. It can be used to compare the energy efficiency figures for different machine combinations: best-quality (slowest), highest-productivity (fastest) or other alternative combinations.
Graphic technology — Determination of the energy consumption of digital printing devices including transitional and related modes
- ICS
- 37.100.10
- CCS
- 发布
- 2018-12-04
- 实施
What is ISO/IEC 29112 - Test pages and methods for measuring monochrome printer resolution about? ISO/IEC 29112 defines methods for the objective measurement of the print quality characteristics that contribute to the perceived resolution of reflection mode monochrome printed pages produced by digital electro-photographic printers. ISO/IEC 29112 prescribes the following: Definitions of print quality characteristics that contribute to perceived resolution
Information technology. Office equipment. Test pages and methods for measuring monochrome printer resolution
- ICS
- 37.100.10
- CCS
- 发布
- 2018-11-30
- 实施
- 2018-11-30
Information technology — Office equipment — Test pages and methods for measuring monochrome printer resolution
- ICS
- 37.100.10
- CCS
- 发布
- 2018-11-07
- 实施
本标准规定了涂布机维护保养的术语和定义 、 技术 要 求 ， 证实方法 。 本标准适用于卷筒料涂布机的维护保养 。
Coating machine maintenance technical specifications
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2018-11-01
- 实施
- 2018-12-01
本标准规定了无溶剂复合机 ( 以下简称设备 ) 维护保养的术语和定义 、 技术要求和证实方法 。 本标准适用于无溶剂复合机的维护保养 。 其他类型的复合机可参照执行
Solvent-free compound machine maintenance technical specifications
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2018-11-01
- 实施
- 2018-12-01
本标准规定了小型切纸机的术语和定义、型式型号、基本要求、技术要求、检验方法、检验规则、标志、包装、运输和贮存以及质量承诺。 本标准适用于液压和电动型的裁切书刊、小规格的平张纸和其它类似纸质材料的小型切纸机。
Printing machinery-Small cutting machine
- ICS
- 37.100.10
- CCS
- C232
- 发布
- 2018-10-26
- 实施
- 2019-02-28
1 Scope This Standard (all parts) specifies methods to determine chemical emission rates of analyte from ICT & CE equipment during intended operation in an Emission Test Chamber ( ETC ). This Standard (all parts) includes specific methods for equipment using consumables, such as printers, and equipment not using consumables, such as monitors and PC’s. Part 2 specifies the methods to determine chemical emission rates of analyte from electronic equipment not using consumables. The methods comprise preparation, sampling (or monitoring) in a controlled ETC , storage and analysis, calculation and reporting of emission rates. Examples of EUT that do not use consumables are: — Monitors and TV sets (CRT, Plasma, LCD, Rear projector, Beamer). — Video (VCR, DVD Player/Recorder, Camcorder). — SAT Receiver (Set-Top Box). — Audio units (CD Player/Recorder, Home theatre Systems, Audio Home Systems, Micro-/Mini, Midi Systems, Amplifier, Receiver). — Portable Audio (CD Player, MP 3 Player, Radio recorder, Clock radio, etc .).
Information technology. Office equipment. Determination of chemical emission rates from electronic equipment - Not using-consumables
- ICS
- 37.100.10
- CCS
- 发布
- 2018-09-30
- 实施
- 2018-09-30
BS EN ISO 12643-1. Graphic technology. Safety requirements for graphic technology equipment and systems - Part 1. General requirements
- ICS
- 37.100.10
- CCS
- 发布
- 2018-09-24
- 实施
- 2018-09-24
BS EN ISO 12643-2. Graphic technology. Safety requirements for graphic technology equipment and systems - Part 2. Prepress and press equipment and systems
- ICS
- 37.100.10
- CCS
- 发布
- 2018-09-24
- 实施
- 2018-09-24
