43.080.10 卡车和挂车 标准查询与下载
共找到 265 条与 卡车和挂车 相关的标准，共 18 页
JT/T 886的本部分规定了道路甩挂运输半挂车的基本要求、配置要求、匹配尺寸要求以及结构与主要参数。本部分适用于道路甩挂运输半挂车的生产与使用管理。
Technical requirements for swap trailer transport of road vehicles.Part 2:Semi-trailer
- ICS
- 43.080.10
- CCS
- T70
- 发布
- 2014-04-15
- 实施
- 2014-09-01
1.1 This standard defines the requirements for the design, manufacture, inspection and testing of cargo tank shell mounted with bottom-loading and vapor-recovery systems. Inspection, testing and periodic maintenance requirements are also covered. 1.2 This standard shall not apply to cryogenic, LPG, chemical tank vehicles, aircraft refuelers, reduced crude, fuel oil and asphalt tank truck / tank trailer shells. 1.3 This standard shall cover the following: • One product, single compartment cargo tank . • Two or more product, two or more compartment cargo tank for hauling products of different groups of classification (This item shall be subject to the loading facility approval prior to fabrication to ensure the compatibility). A single compartment cargo tank is considered as a BASE LINE design. Manufacture or purchase of two or more compartment cargo tanks is OPTIONAL and not a mandatory requirement. 1.4 This standard shall apply to all bottom-loading tank truck / tank trailer vehicles licensed for service in the GCC States. 1.5 This standard does not cover trailer frame components including chassis frame, suspension system, trailer brake system, wheels, air supply reservoir, and other trailer components.
Road Vehicles - Bottom Loading Tank Truck & trailer
- ICS
- 43.080.10
- CCS
- 发布
- 2014-04-02
- 实施
This standard establishes the scope of work, and outlines the requirements for initial inspection and subsequent periodic maintenance inspections by qualified Inspection Personnel or alternatively by a Third Party Inspection Contractor (TPIC) on tank trucks modified to bottom loading.
Bottom loading tank truck – Inspection and periodic maintenance
- ICS
- 43.080.10
- CCS
- 发布
- 2014-04-02
- 实施
This European Standard specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling, transportation and discharge operations can be carried out safely. It specifies the requirements for the assembly of the accessories and the vehicle LPG equipment to the road tanker. This European Standard also identifies additional equipment and accessories that can be used on road tankers carrying LPG. This European Standard does not preclude the use of alternative designs, materials and equipment testing which provide the same or a higher level of safety. ADR [9] requires that such alternative technical codes be recognised by the competent authority, provided that the minimum requirements of section 6.8.2 of ADR [9] are complied with. This European Standard does not apply to "tank-containers" or "battery-vehicles" used for the transport of LPG.
LPG equipment and accessories - Equipping of LPG road tankers
- ICS
- 43.080.10
- CCS
- E00
- 发布
- 2014-04
- 实施
Technical requirements for identification, monitoring and sealing of construction waste transportation vehicles
- ICS
- 43.080.10
- CCS
- T46
- 发布
- 2014-03-12
- 实施
- 2014-03-15
Technical conditions for car and train configuration in drop and pull transport stations Part 1: Semi-trailer tractor
- ICS
- 43.080.10
- CCS
- T45
- 发布
- 2014-01-23
- 实施
- 2014-02-23
Drop and pull transport station car train configuration technical requirements part 2: semi-trailer
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2014-01-23
- 实施
- 2014-02-23
GLOSSARY OF TERMS FOR CARGO TYPE REAR BODY OF MOTOR TRUCKS
- ICS
- 43.080.10
- CCS
- 发布
- 20131218
- 实施
- 20131218
LPG equipments and accessories - Filling and discharge procedures for LPG road tankers; German version EN 13776:2013
- ICS
- 43.080.10
- CCS
- E98
- 发布
- 2013-08
- 实施
This European Standard specifies filling, discharge and emergency procedures for road tankers equipped in accordance with EN 12252 used for the transportation of liquefied petroleum gas (LPG). This European Standard does not apply to "batteries of recept
LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
- ICS
- 43.080.10
- CCS
- 发布
- 2013-06-30
- 实施
- 2013-06-30
LPG equipment and accessories. Filling and discharge procedures for LPG road tankers
- ICS
- 43.080.10
- CCS
- T58
- 发布
- 2013-06-30
- 实施
- 2013-06-30
This European Standard specifies filling, discharge and emergency procedures for road tankers equipped in accordance with EN 12252 used for the transportation of liquefied petroleum gas (LPG). This European Standard does not apply to "batteries of receptacles".
LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
- ICS
- 43.080.10
- CCS
- E98
- 发布
- 2013-06-01
- 实施
- 2013-06-01
本标准规定了液压悬挂挂车的术语和定义、产品型号表示方法、要求、试验方法、检验规则、标志、包装、运输和储存。本标准适用于实现大件运输的液压悬挂挂车(以下简称液压挂车)。
General technical specifications for platform trailer with hydraulic suspension
- ICS
- 43.080.10
- CCS
- T20
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了从事道路货物运输的半挂牵引车和半挂车车型匹配的技术要求,包括一般要求和机械连接、电气连接、结构安全、动力性能和节能环保等专项要求。本标准适用于半挂牵引车与半挂车组成汽车列车时的匹配。
Technical requirements for matching of towing vehicle and semi-trailer
- ICS
- 43.080.10
- CCS
- T79
- 发布
- 2013-04-25
- 实施
- 2013-09-01
This European Standard covers the digital interface at the product loading and/or discharge coupling which is used for the transfer of product related information and specifies the performance requirements, critical safety aspects and tests to provide com
Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels
- ICS
- 43.080.10
- CCS
- 发布
- 2013-01-14
- 实施
- 2013-01-14
LPG equipment and accessories - Equipping of LPG road tankers
- ICS
- 43.080.10
- CCS
- 发布
- 2012-12-21
- 实施
- 2012-12-21
This European Standard specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling,transportation and discharge operations can be carried out safely. It specifies the requirements for the assembly of the accessories and the vehicle LPG equipment to the road tanker. This European Standard also identifies additional equipment and accessories that can be used on road tankers carrying LPG.
LPG equipment and accessories - Equipping of LPG road tankers; German version EN 12252:2012
- ICS
- 43.080.10
- CCS
- E98
- 发布
- 2012-12
- 实施
This European Standard is applicable to non-pressure balanced and pressure balanced footvalves intended for loading and unloading and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment
Tanks for the transport of dangerous goods - Service equipment - Footvalve sizes other than 100 mm dia (nom)
- ICS
- 43.080.10
- CCS
- 发布
- 2012-11-22
- 实施
- 2012-11-22
This European Standard specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling, transportation and discharge operations c
LPG equipment and accessories - Equipping of LPG road tankers
- ICS
- 43.080.10
- CCS
- 发布
- 2012-11-16
- 实施
- 2012-11-16
LPG equipment and accessories. Equipping of LPG road tankers
- ICS
- 43.080.10
- CCS
- T58
- 发布
- 2012-09-30
- 实施
- 2012-09-30
