43.080.10 卡车和挂车 标准查询与下载

ABNT NBR 14324-2012 道路设备 - 坦克 - 格式几何

This Standard specifies the geometric shapes of tanks commonly used.

Road equipment - Tank - Format geometric

EN 12252:2012 液化石油气设备及配件-装备的液化石油气油轮

This European Standard specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling, transportation and discharge operations can be carried out safely. It specifies the requirements for the assembly of the accessories and the vehicle LPG equipment to the road tanker. This European Standard also identifies additional equipment and accessories that can be used on road tankers carrying LPG. This European Standard does not preclude the use of alternative designs, materials and equipment testing which provide the same or a higher level of safety. ADR requires that such alternative technical codes be recognised by the competent authority, provided that the minimum requirements of section 6.8.2 of ADR are complied with. This European Standard does not apply to "tank-containers" or "battery-vehicles" used for the transport of LPG.

LPG equipment and accessories - Equipping of LPG road tankers

DS/EN 13081+A1:2012 危险货物运输罐 罐用服务设备 蒸汽收集适配器和耦合器

This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between the transport tank and the stationary loading and unloading facilities.This European Standard specifies the performance requirements and th

Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler

DS/EN 13082+A1:2012 危险货物运输罐 罐用服务设备 蒸汽转移阀

This European Standard covers the vapour transfer valve, used for the transfer of vapour between the tank compartment and the pipework connecting to the vapour collection adaptor.This European Standard specifies the performance requirements and the critic

Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve

SAE J2807-2012 用于测定牵引车辆总重等级和拖车重量等级的性能要求

This document establishes tow-vehicle performance requirements for combination vehicle acceleration, tradeability, understeer, trailer sway response, braking and park brake at GCWR, and tow-vehicle hitch/attachment structure at TWR. In order to minimize test variations, it provides standard test trailer specifications and requirements for use in these tests. It is acknowledged that there are a wide variety of conditions experienced while ttailering which cannot be completely addressed within this document and in no way is that document intended to establish or limit manufacturers' designs or instructions to the customer. This document provides simple equations to determine TWR from GCWR in conjunction with other vehicle ratings and defined vehicle weight conditions and dimensions.

Performance Requirements for Determining Tow-Vehicle Gross Combination Weight Rating and Trailer Weight Rating

DS/EN 12493+A1:2012 LPG 设备和配件 液化石油气（LPG）焊接钢罐 公路罐车设计和制造

This European Standard specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker tanks and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels

LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture

ANSI/ASAE S478.1-2012 小型通用拖拉机的滚翻防护结构(ROPS）

Establish the test and performance requirements of a roll-over protective structure, ROPS, designed for compact utility tractors to minimize the frequency and severity of crushing injury to the operator resulting from accidental tractor upset.

Roll-Over Protective Structures (ROPS) for Compact Utility Tractors

DS/EN 15969-1:2011 危险货物运输罐 罐车与固定设施之间数据传输的数字接口 第1部分：协议规范 控制、测量和事件数据

This European Standard specifies data protocols and data format for the interfaces between electronic equipment (TVE), on-board computer (OBC) of the tank vehicle and stationary equipment for all interconnecting communication paths.This European Standard specifies the basic protocol FTL used in the communication (basic protocol layer), the format and structure of FTL-data to be transmitted (data protocol layer) and describes the content of the FTL-data.NOTE This data protocol may be used for other application e.g. between stationary tank equipment and offices.

Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data

DS/EN 13922:2011 危险货物运输罐 罐服务设备 液体燃料防溢系统

This European Standard specifies the following points regarding the minimum requirements for an overfill prevention system:- functions;- major components;- characteristics;- test methods.This European Standard is applicable to overfill prevention systems for liquid fuels having a flash point up to but not exceeding 100 °C, excluding liquefied petroleum gas (LPG). The requirements apply to overfill prevention systems suitable for use at ambient temperatures in the range from - 20 °C to + 50 °C, subjected to normal operational pressure variations.

Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels

DS/EN 15969-2:2011 危险货物运输罐 罐车与固定设施之间数据传输的数字接口 第2部分：商业和物流数据

This European Standard specifies the data structure needed for tour management, scheduling orders of measured and unmeasured products online to the truck. Processed orders are transferred back to the host in the office at once or later every time the truck is online. It specifies the transfer of commercial and logistic data between transport vehicle equipment, on board computer of the tank vehicle and stationary facilities for all communication channels between these parties.

Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data

DB13/T 1475-2011 电控液力自动变速器总成技术条件

Technical specifications for electronically controlled hydraulic automatic transmission assembly

DIN 70073:2011 道路车辆.可倾斜装配系统车辆的稳定性.后自动倾斜卡车合成腔式气悬半拖车

Road vehicles - Steadiness of vehicles with tiltable constructional systems - Air-suspended semitrailer with rear-dump truck cavity built-up

SAE J682-2011 后轮飞溅和扔石头保护

For guidance only in regard to highway commercial motor vehicles where protection to the rear against rear wheel splash and stone throw is deemed necessary, the following clearance specifications are recommended.

Rear Wheel Splash and Stone Throw Protection

SAE J851-2011 卡车和客车垫圈间箍和可拆卸轮辋,可拆卸轮辋的尺寸轮

This SAE Recommended Practice establishes dimensions for wheels for demountable rims, demountable rims, and rim spacers. The dimensions given are those necessary to maintain serviceability and interchangeability of the demountable rim, rim spacers, and wheels for demountable rims. Special and less common applications are not covered in this recommended practice.

Dimensions - Wheels for Demountable Rims, Demountable Rims, and Spacer Bands - Truck and Bus (Stabilized Type)

SAE J2233-2011 车身加热系统测试

This SAE Recommended Practice establishes uniform cold weather test procedures and performance requirements for engine coolant type heating systems of bus that are all vehicles designed to transport 10 or more passengers. The intent is to provide a test that will ensure acceptable comfort for bus occupants. It is limited to a test that can be conducted on uniform test equipment in commercially available laboratory facilities. Required test equipment, facilities, and definitions are included. There are two options for producing hot coolant in this recommended practice. Testing using these two approaches on the same vehicle will not necessarily provide identical results. Many vehicle models are offered with optional engines, and each engine has varying coolant temperatures and flow rates. If the test is being conducted to compare the performance of one heater design to another heater design, then the external coolant source approach (Test A) will yield the most comparable results. If the test is being conducted to validate the heater installation on a specific vehicle model with a specific engine, then using the engine to heat the coolant (Test B) will be more appropriate. Defrosting and defogging procedures and requirements are established by SAE J381 which is hereby included by reference. This document will be reviewed and revised as required with advancements in technology and changes in environmental laws.

Bus Body Heating System Test

ASTM E2517-11 III型(M35A2型2.5 t货运卡车/M1078型2.5 t中轻型装甲车/M1082型2.5 t拖车)货运车斗盖的标准规格

1.1 This specification covers the general requirements for the Type III Cargo Bed Cover (CBC). The Type III CBC is a removable general purpose rigid wall enclosure that is mounted on any of the following model 2.5 ton cargo trucks (1) the M35A2 Lightweight Medium Tactical Vehicle (LMTV) and (2) the M1078 LMTV . It can also be mounted on the M1082 LMTV Trailer. The CBC provides environmental protection and security for mission equipment and items of general transport. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)

JT/T 316-2010 货运挂车产品质量检验评定方法

本标准规定了货运挂车产品质量检验的抽样、检验项目与检验方法，以及整车产品质量综合评定方法。 本标准适用于符合GB 1589要求的货运挂车的产品质量监督检验和企业内部质量控制,其他挂车产品的质量检验可参照执行。

Products quality inspection and evaluation method of freight trailer

JT/T 389-2010 厢式挂车技术条件

本标准规定了厢式挂车的技术要求、试验方法、检验规则、标志、包装、运输及储存。 本标准适用于货物运输的厢式半挂车、厢式牵引杆挂车和厢式中置轴挂车(以下简称“厢式挂车”)。

Specification for van trailers

SAE J1750-2010 卡车驾驶员视野描述和评估

This SAE Recommended Practice establishes three alternate methods for describing and evaluating the truck driver's viewing environment: the Target Evaluation, the Polar Plot and the Horizontal Planar Projection. The Target Evaluation describes the field of view volume around a vehicle, allowing for ray projections, or other geometrically accurate simulations, that demonstrate areas visible or non-visible to the driver. The Target Evaluation method may also be conducted manually, with appropriate physical layouts, in lieu of CAD methods. The Polar Plot presents the entire available field of view in an angular format, onto which items of interest may be plotted, whereas the Horizontal Planar Projection presents the field of view at a given elevation chosen for evaluation. These methods are based on the Three Dimensional Reference System described in SAE J182a. This document relates to the driver's exterior visibility environment and was developed for the heavy truck industry (Class B vehicles, class 6, 7, 8 vehicles) although the projection principles presented in this document can be applied to any class of motor vehicles. This document is intended to complement SAE J1050a and provides a visual format that can describe the driver's entire viewing environment. This environment can then be analyzed to determine what the driver is capable of seeing. It should be noted that one of the most important factors affecting the driver's field of view and the ability to make valid vehicle/design comparisons is the location of the driver's eyepoint. SAE J941 defines the Eyellipse which forms the basis for eyepoints chosen as the origin for Polar Plots and Horizontal Planar Projections. The Target Evaluation, Horizontal Planar Projection and Polar Plot create monocular evaluations. Projections/plots of multiple eyepoints must be overlaid to create binocular or ambinocular evaluations. Analytical methods for creating Target Evaluations, Polar Plots and Horizontal Planar Projections for direct and indirect vision (planar and spherical convex mirrors) are presented. Note that it is possible to create plots and projections for other mirror surfaces and vision devices if the equations for determining reflection points are provided.

Describing and Evaluating the Truck Drivers Viewing Environment

SAE J2869-2010 机械系统物理故障分析试验验证

This report details continuing work examining the fatigue life durability of a US Army Trailer. This report describes, through example, a process to evaluate and reduce the experimental data needed for a Mechanical Systems Physics-of- Failure analysis. In addition the report describes the process used to validate the computer simulation models. Evaluate and reduce the experimental data obtained during testing of an instrumented trailer.

Mechanical Systems Physics-of-Failure Analysis Experimental Validation