43.160 特种车辆 标准查询与下载

T/CAAMTB 79-2022 经典车评价规范

本文件规定了经典车的评价规程框架体系、流程及工作方法。 本文件适用于国内生产或合法进口的经典车。

BS ISO 24160:2022 垃圾收集车 垃圾恶臭及渗滤液防治

1   Scope This document specifies methods for preventing the spread of waste odour and the leakage of leachate during the collection and transportation of waste in refuse collection vehicles ( RCVs ), when the control of the spread of waste odour and leakage of leachate is required in order to protect the surrounding environment. This document is not applicable in cases when it is not necessary to provide control of waste odour or leachate due to the composition or packaging of waste and there is no influence on the environment due to the loaded waste.

Refuse collection vehicles. Waste odour and leachate prevention and control

T/NTTX 002-2022 场(厂)内专用机动车辆安全监控管理系统 第1部分：技术要求和检验方法

规定了场(厂)内专用机动车辆(以下简称“车辆”）安全监控管理系统术语和定义、监控系统的构成、监控内容、监控系统的要求、检验方法、检验项目。适用于平衡重式叉车、前移式叉车、侧面式叉车、插腿式叉车、托盘堆垛车、三向堆垛式叉车、观光车和观光列车。

Safety monitoring and management system Part 1: technical requirements and inspection methods for powered vehicles on the place used for a particular purpose

22/30453554 DC BS ISO 8437-1 AMD1 抛雪者 安全要求和测试程序 第 1 部分：术语和常见测试

BS ISO 8437-1 AMD1. Snow throwers. Safety requirements and test procedures - Part 1. Terminology and common tests

22/30453558 DC BS ISO 8437-2 AMD1 抛雪者 安全要求和测试程序 第 2 部分：行人控制的抛雪机

BS ISO 8437-2 AMD1. Snow throwers. Safety requirements and test procedures - Part 2. Pedestrian-controlled snow throwers

22/30453562 DC BS ISO 8437-3 Amd 1. 抛雪机 安全要求和测试程序 第 3 部分：骑乘式扫雪机

BS ISO 8437-3 Amd 1. Snow throwers. Safety requirements and test procedures - Part 3. Ride-on snow throwers

ISO 24160:2022 垃圾收集车.垃圾气味和渗滤液的预防和控制

This document specifies methods for preventing the spread of waste odour and the leakage of leachate during the collection and transportation of waste in refuse collection vehicles (RCVs), when the control of the spread of waste odour and leakage of leachate is required in order to protect the surrounding environment. This document is not applicable in cases when it is not necessary to provide control of waste odour or leachate due to the composition or packaging of waste and there is no influence on the environment due to the loaded waste.

Refuse collection vehicles — Waste odour and leachate prevention and control

GSO EN 16486:2022 压实废料或可回收碎片的机器 压实机 安全要求

This European Standard specifies the safety requirements for the design, manufacture and information for the safe use of compactors that compact waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials. This European Standard applies to: - compactors using a horizontally moving screw, pendulum or plate as compacting part and where the materials move horizontally; and - compactors that are mechanically fed and/or fed by hand. These compactors can be: - static compactors; - transportable compactors; - traversing systems. The scope includes: - any integral mechanical feed equipment (e.g. bin lift); - feed hoppers/openings; - any integral pre-conditioning equipment in the hopper (e.g. perforators, pre-crushing devices and shredders); - any integral material flow control equipment; - the interface between the compactor and any feed equipment (except those excluded from the scope). The scope of this European Standard does not cover: - compactors that are covered by EN 1501 (all parts); - underground compactors, however if these compactors can be used above ground this standard applies; - compactors using thermal technologies for compaction; - vacuum compactors; - compactors where materials are compacted vertically; - containers for static compactors, however the interface between the compaction unit and the container is included; - bins in which materials are collected for feeding into the compactor; - any up-stream pre-treatment equipment that is not integral to the machine and is used to treat the materials before they are fed into the feed opening of the compactor; - vehicles including lifting equipment used to collect and transport the compactor or container; - cranes, lift trucks or other transportable plant used to load materials into the feed hopper/opening and the hazards arising out of using this equipment to load; - any suction or dust control equipment. This European standard does not cover the lifting and transport of transportable compactors. This European Standard does not apply to hazards arising from the materials being processed (e.g. asbestos, clinical waste, aerosol containers). All hazards mentioned in Clause 4 are dealt with in this European Standard. This European Standard is not applicable for compactors which are manufactured before the date of its publication as an EN.

Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements

T/CIPR 0017-2022 用于隧道消防的机器人及其自动供料机构

用于隧道消防的机器人及其自动供料机构 ：提高使用过程中的稳定性，避免其重心不稳而发生倾倒，对机器人起到一个防护效果，使用起来更加稳定。 在进行上料时，电动推杆会均匀推动隔板，使其隔板均匀的再次移动到螺纹杆上，整个自动供料机构结构简单，操作比较方便，节省时间，效率更高

Robot and its automatic feeding mechanism for tunnel fire fighting

ISO/TS 24159:2022 垃圾收集车.手动和后装垃圾收集车的安全性

Refuse collection vehicles — Safety of manual and rear-loaded refuse collection vehicles

BS ISO 24162:2022 垃圾收集车能耗测试方法

What is ISO 24162 - RCV energy consumption testing about?    Refuse collection vehicles (RCVs) carry all types of garbage, waste, and hazardous material. Proper maintenance and functioning of RCVs ensures optimum functioning. ISO 24162 is an International Standard that discusses the test method for energy consumption of RCVs. ISO 24162 specifies a uniform, reproducible testing process for various drive units, chassis, constructions, and lifting devices for the refuse collection vehicles described in EN 1501 (all parts, excluding EN 1501 ‑ 4 ), with which comparison for energy consumption can be performed. This specification defines the criteria for a reference area with regard to a synthesized tour (test circuit). This, therefore, serves to determine a representative test circuit and/or data for a software calculation tool, e.g. VECTO1). Note: VECTO (Vehicle Energy Consumption calculation TOol) is a simulation tool that has been developed by the European Commission for determining CO2 emissions and fuel consumption from heavy-duty vehicles with a gross vehicle mass above 3 500 kg. Who is ISO 24162 - RCV energy consumption testing for?   ISO 24162 on RCV energy consumption testing is applicable to policymakers, planners, administrators, manufacturers, and users. Specifically, ISO 24162 is useful f...

Test method for energy consumption of refuse collection vehicles

ISO 24162:2022 垃圾收集车能耗的试验方法

This document specifies a uniform, reproducible testing process for various drive units, chassis, constructions and lifting devices for the refuse collection vehicles described in EN 1501 (all parts, excluding EN 1501-4), with which a comparison for energy consumption can be performed. This specification defines criteria for a reference area with regard to a synthesized tour (test circuit). This therefore serves to determine a representative test circuit and/or data for a software calculation tool, e.g. VECTO1). NOTE VECTO (Vehicle Energy Consumption calculation TOol) is a simulation tool that has been developed by the European Commission for determining CO2 emissions and fuel consumption from heavy duty vehicles with a gross vehicle mass above 3500 kg. URL: https://​ ec​ .europa​ .eu/​ clima/​ policies/​ transport/​ vehicles/​ vecto​ _en​ #tab​ -0​ -0

Test method for energy consumption of refuse collection vehicles

T/LSZQ 010-2021 自装卸式垃圾车

本文件规定了自装卸式垃圾车的车辆型号、技术要求、作业功能性要求、试验方法、检验规则、标志、运输、贮存和随车技术文件

Self-loading garbage truck

T/LSZQ 009-2021 路面养护车

本文件规定了路面养护车的车辆型号、技术要求、作业功能性要求、试验方法、检验规则、标志、运输、贮存和随车技术文件

road maintenance vehicle

T/SICCA 012-2022 负压救护车

5.1 整车 5.2 医疗舱 5.3 气密性 5.4 负压净化装置 5.5 车载消毒装置 5.6 驾驶室与医疗舱双控系统 5.7 噪声

Negative Pressure Ambulanc

T/SZZL 005-2021 清洗吸污车

整车技术要求、车辆专用性能等

Sewage cleaning truck

T/SZZL 008-2021 仓栅式运输车

整车技术要求，专用装置要求等

Warehouse type transport vehicle

T/SZZL 006-2021 自装卸式垃圾车

整车性能，专用装置要求等。

Self-loading garbage truck

T/SZZL 007-2021 气瓶运输车

整车要求、专用装置要求等

Gas cylinder transport vehicle

DB3208/T 154-2021 场（厂）内专用机动车辆日常维护保养和检查规范

Specifications for daily maintenance and inspection of special motor vehicles in the field (factory)