45.060.01 铁路车辆综合 标准查询与下载
共找到 1302 条与 铁路车辆综合 相关的标准，共 87 页
IEC 62888-1:2018 describes the primary purpose of the Energy Measurement System (EMS), which measures energy consumption on board for applications such as energy management, energy saving, billing and others. It gives requirements for the complete EMS and also requirements for all devices implementing one or more functions of the EMS; applies to newly manufactured EMSs for use on board traction units, powered by AC and/or DC supply voltages as listed in IEC 60850.
Railway applications - Energy measurement on board trains - Part 1: General
- ICS
- 45.060.01
- CCS
- 发布
- 2022-05-12
- 实施
IEC 62888-4:2018 applies to the on board and on board to ground communication services, i.e. it covers the data communication using digital interfaces: a) between functions implemented within the EMS; b) between EMS function and other on board subsystems; c) between EMS and ground communication services.
Railway applications - Energy measurement on board trains - Part 4: Communication
- ICS
- 45.060.01
- CCS
- 发布
- 2022-05-12
- 实施
IEC 62888-3:2018 covers the requirements applicable to the Data Handling System (DHS) of an Energy Measurement System. This document also includes the basic requirements for the Data Collection Service on ground, relating to the acquisition and storage of Compiled Energy Measurement Data.
Railway applications - Energy measurement on board trains - Part 3: Data handling
- ICS
- 45.060.01
- CCS
- 发布
- 2022-05-12
- 实施
本文件规定了城市轨道交通工程信息模型在不同设计阶段的交付准备、交付物、交付协同、交付验收与归档的相关要求。 本文件适用于城市轨道交通车站工程、区间工程、车辆段工程、设备系统工程、控制中心及主变电所，新建、改建、扩建设计中应用模型建立的设计信息的交付，以及各参与方之间和参与方内部的信息传递。
Urban rail transit engineering information model — Specifications for design delivery
- ICS
- 45.060.01
- CCS
- G541
- 发布
- 2022-04-26
- 实施
- 2023-04-20
本文件规定了城市轨道交通列车可编程逻辑控制装置的使用条件、技术要求、试验方法和检验规则等。 本文件适用于城市轨道交通列车可编程逻辑控制装置的设计、制造和应用。
Urban rail transit—Programmable logic control unit for train—Technical specification
- ICS
- 45.060.01
- CCS
- G541
- 发布
- 2022-04-26
- 实施
- 2023-04-20
本文件规定了城市轨道交通电子导向胶轮系统车辆的使用条件、主要技术条件、基本要求、车体及车辆连接、司机室、客室、空调系统、转向架、制动系统、牵引及辅助供电系统、车载储能系统、照明系统、控制与诊断系统、电子导向控制系统、通信、广播与信息显示、试验方法、检验规则、标志、包装与运输、检查与验收等方面内容。 本文件适用于T/CAMET 00001规定的电子导向胶轮系统车辆，用于车辆的设计、生产、检验。
Electronically guided rubber tyred transit system—Vehicle—General technical specification
- ICS
- 45.060.01
- CCS
- G541
- 发布
- 2022-04-26
- 实施
- 2023-04-20
1 Scope This International Standard specifies general criteria to demonstrate by testing that newly constructed complete railway vehicles conform with standards or other normative documents. This International Standard, as a whole or in part, applies to all railway vehicles except special purpose vehicles such as track-laying machines, ballast cleaners and personnel carriers. The extent of application of the standard for particular vehicles will be specifically mentioned in the contract , to take account, where necessary, of any legislative requirements. NOTE 1 The parts of the standard which are applicable will depend on the type of vehicle (e.g. passenger, freight, powered trailer, etc.). NOTE 2 The scope of this standard excludes railbound and road/rail vehicles for construction and maintenance of railway infrastructure. NOTE 3 This standard does not deal with tests carried out on components or equipment before fitting to the vehicle. In so far as this International Standard is applicable, it may be used for the following: — generator sets mounted on a vehicle provided for auxiliary purposes; — electrical transmission used on trolley buses or similar vehicles; ...
Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service
- ICS
- 45.060.01
- CCS
- 发布
- 2022-03-31
- 实施
- 2022-03-31
This document defines specifications covering laboratory tests for seats designed for passengers and crew in railway tractive and trailer vehicles. It concerns tri-axial rectilinear vibration within the frequency range 0,5 Hz to 50 Hz. It specifies the input test vibration to be used at seat testing. This document makes it possible to characterize, in the form of frequency response functions, the manner in which vibration is transmitted to the seat occupant. It also provides an estimator showing the behaviour of the seat in terms of dynamic comfort perceived by the seated person. Different types of excitations can be used and are described depending on knowledge of the vibration environment encountered by the seat and the capability of the vibration simulator.
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 2: Application to railway vehicles
- ICS
- 45.060.01
- CCS
- 发布
- 2022-03-29
- 实施
1 Scope This part of IEC 61375 applies to all equipment and devices implemented according to IEC 61375‑2‑3:2015, IEC 61375‑2‑5:2014 and IEC 61375‑3‑4:2014, i.e. it covers the procedures to be applied to such equipment and devices when the conformance should be proven. The applicability of this document to a TCN implementation allows for individual conformance checking of the implementation itself, and is a pre-requisite for further interoperability checking between different TCN implementations.
Electronic railway equipment. Train communication network (TCN) - TCN conformance test
- ICS
- 45.060.01
- CCS
- 发布
- 2022-02-28
- 实施
- 2022-02-28
What is BS EN 15734‑2 about? BS EN 15734‑2 is the second part of the multi-series of European standards on ‘Railway applications. BS EN 15734‑2 specifies test methods and acceptance criteria for a brake system for use in high-speed trains as described in the TSI Rolling Stock, operating on routes of the trans-European high-speed rail system. The tests defined in BS EN 15734‑2 have the purpose of verifying that the braking performance and functions of the train's brake system comply at least with the respective requirements of EN 15734-1 . NOTE: BS EN 15734‑2 is applicable to: New vehicles of high-speed trains New constructions of existing vehicle types Major overhauls of the above-mentioned vehicles if they involve redesigning or extensive alteration to the brake system of the vehicle concerned.
Railway applications. Braking systems of high speed trains - Test methods
- ICS
- 45.060.01
- CCS
- 发布
- 2022-01-31
- 实施
- 2022-01-31
1 Scope This European Standard describes the functionality, constraints, performance and operation of a brake system for use in high speed trains as described in the TSI High Speed Rolling Stock, operating on routes of the European railways and their infrastructure systems. The brake system requirements specified in this European Standard apply to trains that may operate at a maximum speed of up to 350 km/h on lines specifically built for high speed and define graduated values for deceleration related to four speed ranges (see Clause 6). This European Standard covers: — all new vehicle designs of high speed trains; — all major overhauls of the above-mentioned vehicles if they involve redesigning or extensive alteration to the brake system of the vehicle concerned. This European Standard does not cover locomotive hauled trains, which are specified by EN 14198. NOTE This document applies the functional subdivision into subsystems as specified in the TSI High speed. The braking system is part of the function: “Accelerate, maintain speed, brake and stop”.
Railway applications. Braking systems of high speed trains - Requirements and definitions
- ICS
- 45.060.01
- CCS
- 发布
- 2022-01-31
- 实施
- 2022-01-31
Railway applications - Current collection systems - Pantographs, testing methods for contact strips
- ICS
- 45.060.01
- CCS
- 发布
- 2021-12-16
- 实施
本文件适用于城市轨道交通工程及市域郊铁路进入文物保护单位保护范围和建设控制地带的文物建筑影响评估，包括古建筑、石窟寺及石刻、近现代重要史迹及代表性建筑等。地下不可移动文物和重要遗址的影响评估方法可参照执行。
Technical specification for impact assessment of urban rail transit projects on cultural relics buildings
- ICS
- 45.060.01
- CCS
- S 09
- 发布
- 2021-12-09
- 实施
- 2022-01-09
BS EN 15654-1 AMD1. Railway applications. Measurement of vertical forces on wheels and wheelsets - Part 1. On-track measurement sites for vehicles in service
- ICS
- 45.060.01
- CCS
- 发布
- 2021-12-09
- 实施
- 2021-12-09
本文件规定了公铁两用车的术语和定义、分类、通用设计要求、主要系统要求、整车性能及试验方法、检验规则、标识、运输和贮存的要求。 本文件适用于标准轨距、宽轨、窄轨路况下的公铁两用车的设计和制造。
Road-rail vehicle general technical specification
- ICS
- 45.060.01
- CCS
- C372
- 发布
- 2021-12-06
- 实施
- 2021-12-07
IEC 61375-2-8:2021 applies to all equipment and devices implemented according to IEC 61375-2-3:2015, IEC 61375-2-5:2014 and IEC 61375-3-4:2014, i.e. it covers the procedures to be applied to such equipment and devices when the conformance should be proven. The applicability of this document to a TCN implementation allows for individual conformance checking of the implementation itself, and is a pre-requisite for further interoperability checking between different TCN implementations.
Electronic railway equipment - Train communication network (TCN) - Part 2-8: TCN conformance test
- ICS
- 45.060.01
- CCS
- 发布
- 2021-12-03
- 实施
- 2022-03-01 (7)
Railway applications -- Testing and Simulation for the acceptance of running characteristics of railway vehicles -- Running Behaviour and stationary tests
- ICS
- 45.060.01
- CCS
- 发布
- 2021-11-05
- 实施
- 2021-11-05
Railway applications. Vehicle Maintenance. Guide for identification and management of Safety Critical Components for railway vehicles
- ICS
- 45.060.01
- CCS
- 发布
- 2021-11-05
- 实施
- 2021-11-05
Railway applications — Suspension components — Part 2: Approval procedure and quality monitoring for elastomer-mechanical parts
- ICS
- 45.060.01
- CCS
- 发布
- 2021-11-04
- 实施
