共找到 502 条与 车辆 相关的标准,共 34 页
Railway applications - Closing and locking devices for payload protecting devices against environmental influences - Requirements for durability, operation, indication, maintenance, recycling (Amendment)
Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines (Amendment)
EMU rescue braking command conversion device
BS EN 15723 AMD1. Railway applications. Closing and locking devices for payload protecting devices against environmental influences. Requirements for durability, operation, indication, maintenance, recycling
BS EN 15877-2 AMD1. Railway applications. Markings of railway vehicles - Part 2. External markings on coaches, motive power units, locomotives and on track machines
标准主要测试对象为轨道车辆储能系统中的锂离子动力电池和超级电容储能元件,包括单体、模组和系统不同层级。测试内容包括电性能测试、安全测试和寿命测试,明确了测试项点及各测试项点的测试条件、测试方法和结果要求。同时,为了深入评估分析储能元件在轨道交通工况应用下的适应性,锂离子动力电池测试标准中专门新增了工况验证性试验项目作为研究性试验,实现了该标准针对不同车型应用的定制化设计特点。填补了我国国内锂离子动力电池和超级电容在轨道交通应用方面的标准空白。
Test methods for onboard energy storage system of railway transportation equipment —Part 2: Storage system with super capacitor
标准主要测试对象为轨道车辆储能系统中的锂离子动力电池和超级电容储能元件,包括单体、模组和系统不同层级。测试内容包括电性能测试、安全测试和寿命测试,明确了测试项点及各测试项点的测试条件、测试方法和结果要求。同时,为了深入评估分析储能元件在轨道交通工况应用下的适应性,锂离子动力电池测试标准中专门新增了工况验证性试验项目作为研究性试验,实现了该标准针对不同车型应用的定制化设计特点。填补了我国国内锂离子动力电池和超级电容在轨道交通应用方面的标准空白。
Test standards for super-capacitor cell and module of railway transportation equipment
标准主要测试对象为轨道车辆储能系统中的锂离子动力电池和超级电容储能元件,包括单体、模组和系统不同层级。测试内容包括电性能测试、安全测试和寿命测试,明确了测试项点及各测试项点的测试条件、测试方法和结果要求。同时,为了深入评估分析储能元件在轨道交通工况应用下的适应性,锂离子动力电池测试标准中专门新增了工况验证性试验项目作为研究性试验,实现了该标准针对不同车型应用的定制化设计特点。填补了我国国内锂离子动力电池和超级电容在轨道交通应用方面的标准空白。
Test methods for onboard energy storage system of railway transportation equipment— Part 1: Traction battery system
标准主要测试对象为轨道车辆储能系统中的锂离子动力电池和超级电容储能元件,包括单体、模组和系统不同层级。测试内容包括电性能测试、安全测试和寿命测试,明确了测试项点及各测试项点的测试条件、测试方法和结果要求。同时,为了深入评估分析储能元件在轨道交通工况应用下的适应性,锂离子动力电池测试标准中专门新增了工况验证性试验项目作为研究性试验,实现了该标准针对不同车型应用的定制化设计特点。填补了我国国内锂离子动力电池和超级电容在轨道交通应用方面的标准空白。
Traction battery cell and module for railway application
Railway applications - Closing and locking devices for payload protecting devices against environmental influences - Requirements for durability, operation, indication, maintenance, recycling
Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines
Railway applications -- Acoustics -- Measuring of door audible warnings
Three- and four-axle bogies of freight cars. General technical requirements
Bunker type freight cars. General specifications
Open hopper cars with the track 1520 mm for bulk cargoel. General specifications
Three- and four-axle bogies of freight cars. Acceptance rules and test methods
Railway applications. Ground based services. Vehicle waste water discharge equipment
This document specifies dimensions for couplings for railway- and truck containers; reducers adapting 51/2 inch to nipples nominal size 80 and 100 via G 3 or G 4 external threads according to DIN EN ISO 228-1.
Couplings for fuelling railway and truck containers - Reducer adapting 5 1/2 inch to nipples G 3 or G 4, nominal size 80 or 100
本文件规定了中低速磁浮交通列车制动系统(以下简称制动系统)的术语和定义、使用环境条件、技术要求、制动装置要求、检验、标志及质量保证等内容。 本文件适用于运营速度为120km/h及以下,线路采用F型导轨的中低速磁浮交通列车制动系统的设计、制造、检验与验收。
Technical specification for braking system of medium and low speed maglev transit
本文件规定了中低速磁浮交通列车(以下简称列车)落成后投入使用前的试验项目、试验条件、试验方法及试验评定指标。 本文件适用于列车落成后投入使用前的试验及其结果的评价。
Train test specification for medium and low speed maglev transit
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号