47.020.40 起重设备和货物搬运设备 标准查询与下载

GOST R 54117-2010 全球导航卫星系统.海上航行接收设备.导航接收设备.性能标准,试验方法和要求测试结果

The Global Navigation Satellite Systems. Maritime differential subsystems. Navigation receiver equipment. Performance standards, methods of testing and required test results

ASTM F1797-09e1 绝缘采掘式起重机声音发射试验的标准试验方法

This test method permits testing of the major components of a digger derrick generated by the rapid release of energy from localized sources within the digger derrick under controlled loading. The energy releases occur during intentional application of a predetermined load. These energy releases can be monitored and interpreted by qualified individuals. Acceptance/rejection criteria are beyond the scope of this test method. The test may be discontinued at any time to investigate a particular area of concern, or to prevent a fault from continuing to ultimate failure of the digger derrick resulting from the application of the test load. This test method provides a means of detecting acoustic emission sources that may be defects, irregularities, or both, affecting the structural integrity or intended use of the aerial personnel device. Significant sources of acoustic emission found with this test method shall be evaluated by either more refined acoustic emission test techniques or by other nondestructive methods (visual, liquid penetrant, radiography, ultrasonic, magnetic particle, etc.). Other nondestructive methods may be required in order to precisely locate defects in the digger derrick, and to estimate their size. Additional tests are outside the scope of this test method. Defective areas found in digger derricks by this test method should be repaired and retested as appropriate. Repair procedure recommendations are outside the scope of this test method. Repair procedure recommendations are outside the scope of this test method.1.1 This test method covers a procedure for acoustic emission (AE) testing of digger derricks. 1.1.1 Equipment Covered8212;This test method applies to special multipurpose vehicle-mounted machines, commonly known as digger derricks. These machines are primarily designed to dig holes, set poles, and position materials and apparatus. 1.1.1.1 Insulated and non-insulated type digger derricks may be evaluated with this test method. 1.1.1.2 Digger derricks, if so equipped to position personnel or equipment, or both, may also be evaluated with this test method in conjunction with Test Method F914. 1.1.2 Equipment Not Covered8212;Excluded from this test method are general-purpose cranes designed only for lifting service and machines primarily designed only for digging holes. 1.2 The AE test method is used to detect and area-locate emission sources. Verification of emission sources may require the use of other nondestructive test (NDT) methods, such as radiography, ultrasonic, magnetic particle, liquid penetrant, and visual inspection. 1.3 WarningThis test method requires that external loads be applied to the superstructure of the vehicle under test. During the test, caution must be taken to safeguard personnel and equipment against unexpected failure or instability of the vehicle or components. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks

GOST R ISO 7364-2009 造船和海事建筑.舱面机械.舷梯绞车

Shipbuilding and marine structures. Deck machinery. Accommodation ladder winches

DIN 82008-1:2008 带螺纹柄的双耳接头配件.第1部分:旋转接头和松紧螺丝扣用非合金质量钢

Double lug head fittings with threaded shank - Part 1: For swivels and turnbuckles, non-alloy quality steel

DIN 82008-2:2008 带螺纹柄的双耳接头配件.第2部分:松紧螺丝扣用不锈钢

Double lug head fittings with threaded shank - Part 2: For turnbuckles, stainless steel

DIN 82010-1:2008 带螺柄的螺柱孔眼配件.第1部分:旋转接头和松紧螺丝扣用非合金质量钢

Stud-eye head fittings with threaded shank - Part 1: For swivels and turnbuckles, non-alloy quality steel

DIN 82006-1:2008 带螺纹柄的椭圆形孔眼接头配件.第1部分:旋转接头和松紧螺丝扣用非合金质量钢

Oval eye head fittings with threaded shank - Part 1: For swivels and turnbuckles, non-alloy quality steel

DIN 82006-2:2008 带螺纹柄的椭圆形孔眼接头配件.第2部分:松紧螺丝扣用不锈钢

Oval eye head fittings with threaded shank - Part 2: For turnbuckles, stainless steel

DIN 82010-2:2008 带螺纹柄的螺柱孔眼配件.第2部分:松紧螺丝扣用不锈钢

Stud-eye head fittings with threaded shank - Part 2: For turnbuckles, stainless steel

KS V ISO 8148-2008 造船和海洋结构物吊杆头配件固定式

Shipbuilding and marine structures－Derrick boom headfittings－Fixed type

CB/T 8521-2008 造船门式起重机设计要求

本标准规定了额定起重量不小于100t,跨度不小于40m的造船用门式起重机（以下简称起重机）的分类、设计准则、设计方法和设计验证项目与要求等。 本标准适用于起重机的设计。

Design requirements of shipbuilding gantry crane

ANSI MH30.1-2007 码头调准装置的安全、性能和测试

This standard defines safety, performance, and testing requirements with regard to design, use, and maintenance of dock leveling devices. The purpose of this Standard is to provide a uniform means of comparison, improve user confidence and knowledge, and define safety requirements of dock leveling devices.

Safety, Performance, and Testing of Dock Leveling Devices

KS V 6717-2006(2011) 液压系泊绞车

Hydraulic mooring winches

KS V 3437-2006(2011) 船舶顶部装置用钢制货舱

Ships’ steel cargo blocks for topping units

DS/ISO 16155:2006 船舶和航海技术 计算机应用 船载装载仪器

This standard is applicable where computer equipment is used to perform functions related to loading andship safety, such as, but not limited to, intact and damaged stability and longitudinal strength.This standard defines requirements to a shipboard loading instrument that is supplementary to IMO MSC/Circ.836, IMO MSC/Circ. 854, IMO MSC/Circ. 891 and ACS recommendation No. 48

Ships and marine technology - Computer applications - Shipboard loading instruments

KS V 2034-2006 船舶用小型立式链轮

? ??? ??? ???? ?? ??? ??? ??? ????.

Ships’ small size stand rollers

KS V 2116-2006(2011) 通用船舶链条

Ships’ chains for general use

KS V 2034-2006(2016) 船舶小型立辊

Ships’ small size stand rollers

KS V 2034-2006(2021) 船舶小型立辊

Ships’ small size stand rollers

KS V 2012-2006(2011) 铸铁螺栓型链终止

Cast iron dog type chain cable compressors