47.020.70 导航和控制设备 标准查询与下载

T/CEC 646-2022 电力北斗定位设备环境与电磁兼容测试方法

本文件规定了电力北斗定位设备环境适应性、电磁兼容性测试方法。 本文件适用于电力北斗定位设备环境适应性与电磁兼容性测试。

Environment and Electromagnetic Compatibility Test Method for Electric Beidou Positioning Equipment

22/30416022 DC BS ISO 23807 船舶和海洋技术 船岸数据通信通用要求

BS ISO 23807. Ships and marine technology. General requirements for the ship-shore data communication

BS ISO 11606:2022 船舶和海洋技术 船用电磁罗盘

1   Scope This document specifies general requirements, type tests and individual tests for the marine electromagnetic compasses , intended for steering purposes and/or taking bearings on board ships, required by Chapter V of SOLAS, 1974 and the International Code of Safety for High-Speed Craft (HSC Code). In accordance with IMO Resolution MSC.166(78), this document is applicable to marine electromagnetic compasses fitted before 1 July 2002. For marine electromagnetic compasses installed on or after 1 July 2002, ISO 22090‑2 is applicable. The magnetic compasses specified in this document apply to ships the overall length of which is normally not less than 24 m. NOTE In this document requirements extracted from the recommendations of IMO resolutions are printed in italics.

Ships and marine technology. Marine electromagnetic compasses

IEC 63173-2:2022 海上导航和无线电通信设备及系统.数据接口.第2部分:船岸安全通信（SECOM）

Maritime navigation and radiocommunication equipment and systems - Data interface - Part 2: Secure communication between ship and shore (SECOM)

BS ISO 20673:2022 船舶和海洋技术 电动舵角指示器

1   Scope This document specifies the construction, performance requirements, methods of testing and required test results for electric rudder angle indicators required to comply with Clause 2.5.4, Regulation 19, chapter V, SOLAS 1974 (as amended, 2000). This document is associated with IMO Resolution A.694 (17) and IEC 60945. Where a requirement in this document is different from IEC 60945, the requirement in this document takes precedence.

Ships and marine technology. Electric rudder angle indicators

ASTM F823-22 带橱柜的船用钢制台式原木标准规范

1.1 This specification covers the construction of marine log desks of steel construction with cabinets. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Desk, Log, Marine, Steel, with Cabinet

ASTM F824-22 船用钢制餐桌标准规范

1.1 This specification covers the construction of round, square, and rectangular marine mess tables with or without adjustable lee rails for use in crew, officer, and passenger dining areas aboard ship. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Tables, Mess, Marine, Steel

BS ISO 22555:2022 船舶和海洋技术 螺旋桨螺距指示器

What is ISO 22555 -   Propeller pitch indicators about?    ISO 22555 is an International Standard that focuses on ships and marine technology. ISO 22555 gives the best guidelines for propeller pitch indicators.    ISO 22555 specifies the construction, performance requirements, methods of testing and required test results for the propeller pitch indicators (hereinafter referred to as “indicator system”).   Who is ISO 22555 - Propeller pitch indicators ...

Ships and marine technology. Propeller pitch indicators

BS ISO 20672:2022 船舶和海洋技术 转弯速率指示器

What is ISO 20672 – Ships and marine technology about?    ISO 20672 is an International Standard that focuses on ships and marine technology.  ISO 20672 gives the best guidance about the rate of indicators.    ISO 20672 specifies the construction, performance requirements, methods of testing and required test results for the rate of turn indicators.   Note: All requirements that are extracted from the recommendations of IMO Resolution A.526(13) on performance standards for the rate of turn indicators are printed in italics and the resolution and paragraph numbers are indicated in brackets.  Who is ISO 20672 - Ships and marine technology

Ships and marine technology. Rate of turn indicators

ISO 20673:2022 船舶和海上技术.电动舵角指示器

This document specifies the construction, performance requirements, methods of testing and required test results for electric rudder angle indicators required to comply with Clause 2.5.4, Regulation 19, chapter V,ISOLAS 1974 (as amended, 2000). This document is associated with IMO Resolution A.694 (17) and IEC 60945. Where a requirement in this document is different from IEC 60945, the requirement in this document takes precedence.

Ships and marine technology — Electric rudder angle indicators

ISO 11606:2022 船舶和海上技术.海上电磁罗盘

This document specifies general requirements, type tests and individual tests for the marine electromagnetic compasses, intended for steering purposes and/or taking bearings on board ships, required by Chapter V ofISOLAS, 1974 and the International Code of Safety for High-Speed Craft (HSC Code). In accordance with IMO Resolution MSC.166(78), this document is applicable to marine electromagnetic compasses fitted before 1 July 2002. For marine electromagnetic compasses installed on or after 1 July 2002, ISO 22090-2 is applicable. The magnetic compasses specified in this document apply to ships the overall length of which is normally not less than 24 m. NOTE In this document requirements extracted from the recommendations of IMO resolutions are printed in italics.

Ships and marine technology — Marine electromagnetic compasses

ISO 20672:2022 船舶和海上技术.转向率指示器

This document specifies the construction, performance requirements, methods of testing and required test results for the rate of turn indicators required by Clause 2.9.1, Regulation 19, chapter V,ISOLAS 1974 (as amended, 2000). It is based upon the requirements of IMO Resolution A.526(13), and is also associated with IMO Resolution A.694 (17) and IEC 60945. Where a requirement in this document is different from that in IEC 60945, the requirement in this document takes precedence. NOTE All requirements that are extracted from the recommendations of IMO Resolution A.526(13) on performance standards for rate of turn indicators are printed in italics and the resolution and paragraph numbers are indicated in brackets.

Ships and marine technology — Rate of turn indicators

ISO 22555:2022 船舶和海上技术.螺旋桨螺距指示器

This document specifies the construction, performance requirements, methods of testing and required test results for the propeller pitch indicators (hereinafter referred to as “indicator system”) required by Clause 2.5.4, Regulation 19, chapter V,ISOLAS 1974 (as amended, 2000). This document is associated with IMO Resolution A.694 (17) and IEC 60945. Where a requirement in this document differs from IEC 60945, the requirement in this document takes precedence.

Ships and marine technology — Propeller pitch indicators

EN IEC 62288:2022 海上导航和无线电通信设备和系统 在船载导航显示器上显示导航相关信息 一般要求、测试方法和所需的测试结果

This document specifies the general requirements, methods of testing, and required test results, for the presentation of navigation-related information on shipborne navigational displays in support of IMO resolutions MSC.191(79) as amended by MSC.466(101) in June 2019, and where applicable MSC.302(87). This document also supports the guidelines included in the related IMO Circulars MSC.1/Circ.1609 on the standardization of user interface design for navigation equipment and SN.1/Circ.243 as revised in June 2019 on the presentation of navigation related symbols, terms and abbreviations. This document also specifies the presentation of AIS data reports and the AIS Application Specific Messages defined for international use in IMO SN.1/Circ.289 and intended to be received by a ship for display onboard. NOTE All text in this document whose wording is identical to text contained in an IMO document is printed in italics. Reference to the document is noted at the beginning of the paragraph. The notation contains a prefix referring to the document and a suffix with the paragraph number from the document (for example, (MSC191/1); (SN243/1), etc.).

Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results

KS V ISO 16273:2021 船舶和海上技术.高速船用夜视设备.操作和性能要求 试验方法和要求的试验结果

Ships and marine technology — Night vision equipment for highspeed craft — Operational and performance requirements, methods of testing and required test results

KS V ISO 16273-2021 船舶和海上技术.高速船用夜视设备.操作和性能要求 试验方法和要求的试验结果

Ships and marine technology－Night vision equipment for high-speed craft－Operational and performance requirements, methods of testing and required test results

IEC 62288:2021 海上导航和无线电通信设备和系统 在船载导航显示器上显示导航相关信息 一般要求、测试方法和所需的测试结果

Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results

DIN EN 303676:2021 用于内陆水道的导航雷达 操作、功能和技术要求（认可英文版 EN 303 676 V1.1.1（2021-07）作为德国标准）

This European Standard (EN) has been developed by the European Standardization Organization ETSI (European Telecommunication Standardization Institute) and specifies requirements in the telecommunications sector.

Navigation radar used on inland waterways - Operational, functional and technical requirements (Endorsement of the English version EN 303 676 V1.1.1 (2021-07) as a German standard)

LST EN IEC 63173-1:2021 海上导航和无线电通信设备和系统 数据接口 第1部分：基于 S-100（IEC 63173-1:2021）的 S-421 航线规划

Maritime navigation and radiocommunication equipment and systems - Data interface - Part 1: S-421 route plan based on S-100 (IEC 63173-1:2021)

OVE EN IEC 63173-2:2021 海上导航和无线电通信设备和系统 数据接口 第2部分：船岸安全通信（SECOM）（IEC 80/1005/CDV）（英文版）

Maritime navigation and radiocommunication equipment and systems - Data interface - Part 2: Secure communication between ship and shore (SECOM) (IEC 80/1005/CDV) (english version)