47.020.70 导航和控制设备 标准查询与下载

T/CANSI 118-2023 海上钻井平台设备运行监测系统一般要求

本文件规定了海上钻井平台的设备运行监测系统的性能要求、数据采集、数据处理、状态判别、趋势监测以及决策信息输出与显示。

General requirements for offshore drilling platform equipment operation monitoring system

T/CANSI 77-2023 智能船舶系统试航阶段功能试验一般要求

本文件规定了智能船舶试航阶段的试验准备、智能船舶系统、数据交互试验流程、智能船舶系统功 能试验流程等。

General requirements for function test of intelligent ship system during sea trial

IEC 61162-450:2023 PRV

IEC 61162-1:2023 PRV

BS ISO 22554:2023 船舶和海洋技术 传动轴转速指示器 电动式、电子式

Ships and marine technology. Propeller shaft revolution indicators. Electric type and electronic type

ISO/FDIS 16425:2023 船舶和航海技术 船上设备和系统的船舶通信网络安装规范

Ships and marine technology — Specification for the installation of ship communication networks for shipboard equipment and systems

ISO/FDIS 19848:2023 船舶和海洋技术 船上机械和设备的标准数据

Ships and marine technology — Standard data for shipboard machinery and equipment

ISO 22554:2023 船舶和航海技术 螺旋桨轴转数指示器 电动型和电子型

Ships and marine technology — Propeller shaft revolution indicators — Electric type and electronic type

KS V ISO 19636-2023 船舶和海洋技术.液化天然气运输船纵倾和纵倾测定用倾斜仪的一般要求

Ships and marine technology — General requirements for inclinometers used for the determination of trim and list of LNG carriers

ASTM F956-91(2023) 铸钟声音信号的标准规范

1.1 This specification covers cast sound-signalling bells, together with bulkhead mounting plates for the smaller bells, for use on ships, boats, and other marine craft, for compliance with the rules in the convention on the International Regulations for Preventing Collisions at Sea (commonly called Colregs).2 See Appendix X1. 1.2 Bells and bulkhead mounting plate shall be sized as indicated in Section 4 (see Appendix X2). 1.3 For consistency with International Regulations, all measurements are in SI units. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Bell, Cast, Sound Signalling

ASTM F957-91(2023) 锣声信号标准规范

1.1 This specification covers gongs for use on ships 100 m or more in length, as required by International Regulations (see Appendix X1). 1.2 For consistency with International Regulations, all measurements are in SI units. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Gong, Sound Signaling

ISO/DIS 19848 船舶与航海技术《船用机械设备标准资料》

Ships and marine technology — Standard data for shipboard machinery and equipment

ISO/DIS 16425 船舶与航海技术《船载设备和系统船舶通信网络安装规范》

Ships and marine technology — Specification for the installation of ship communication networks for shipboard equipment and systems

ISO 9875 船舶与航海技术 海洋回声测深设备

Ships and marine technology — Marine echo-sounding equipment

ISO 25862:2019/DAmd 1 船舶与航海技术 船用磁罗经、罗经柜和方位读数装置 修正案1

Ships and marine technology — Marine magnetic compasses, binnacles and azimuth reading devices — Amendment 1

ISO/DIS 8728 船舶与航海技术 船用电罗经

Ships and marine technology — Marine gyro-compasses

ISO/DIS 19847 船舶与海洋技术 船载数据服务器共享海上现场数据

Ships and marine technology — Shipboard data servers to share field data at sea

ISO 9875:2023 船舶和海洋技术 海洋回声探测设备

This document specifies the minimum operational and performance requirements, methods of testing and test results of marine echo-sounding equipment required to comply with the performance standards adopted by the IMO Resolution A.224(VII) as amended by IMO Resolution MSC.74(69), Annex 4. This document is intended to be used in conjunction with IMO Resolution A.694(17) and with IEC 60945. For bridge alert management, IMO Resolution MSC.302(87) supersedes IMO Resolution MSC.74(69), Annex 4. Accordingly, this document incorporates references to IEC 62923-1 and IEC 62923-2 which are associated with Resolution MSC.302(87) for requirements and tests where applicable. In accordance with IMO Resolution MSC.74(69), Annex 4, Articles 1 and 2, the purpose of echo-sounding equipment is to provide reliable information on the depth of water under a ship to aid navigation in particular in shallow water. This document is applicable for ship speeds from 0 kn to 30 kn.

Ships and marine technology — Marine echo-sounding equipment

ISO/FDIS 22554 船舶与航海技术 螺旋桨轴转数指示器 电动式和电子式

Ships and marine technology — Propeller shaft revolution indicators — Electric type and electronic type

23/30469096 DC BS ISO 25862 AMD 1. 船舶和航海技术 船用磁罗经、罗盘和方位读取装置

BS ISO 25862 AMD 1. Ships and marine technology. Marine magnetic compasses, binnacles and azimuth reading devices