49.025.99 其他材料 标准查询与下载

SAE AMS2641B-2012 石油基,车辆磁粉探伤

This specification covers two types of refined hydrocarbon compounds in the form of liquids. This product has been used typically as a vehicle for the suspension of magnetic particles used in magnetic particle inspection procedures, but usage is not limited to such applications.

Vehicle, Magnetic Particle Inspection, Petroleum Base

SAE AMS2280C-2012 痕量元素控制,镍合金铸件

This specification establishes maximum permissible limits for trace elements in nickel alloy castings. These products have been used typically for limited use to achieve premium-quality material for highly-stressed rotating parts, such as turbine blades, where control of trace elements is required to maintain elevated-temperature tensile, stress-rupture, creep, and low-cycle fatigue properties, but usage is not limited to such applications.

Trace Element Control, Nickel Alloy Castings

SAE AMS5665N-2012 74Ni 15.5Cr 8.0Fe镍合金, 耐腐蚀和耐热, 棒材, 锻件和环

This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings. These products have been used typically for parts requiring both corrosion and oxidation resistance and where such parts may require welding during fabrication and for parts requiring oxidation resistance up to 2000 degrees F (1093 degrees C) but useful at the higher temperatures only when stresses are low, but usage is not limited to such applications. Strength at elevated temperatures is similar to that of the 18-8 type of steel.

Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 74Ni 15.5Cr 8.0Fe

SAE AMS1478B-2012 反应物类型的飞机包装喷雾除臭剂

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.. This specification covers one type of a biodegradable, deactant-type deodorizer in the form of an aerosol-packaged liquid. Primarily for use as a deodorizer in aircraft cabins, galleys, and lavoratories to control odor by chemical reaction rather than by masking.

Deodorizer, Aircraft, Deactant-Type, Aerosol Packaged

SAE AMS4544G-2012 67Ni 30Cu退火镍铜合金, 防腐蚀薄板材, 带材以及板材

This specification covers a corrosion-resistant nickel-copper alloy in the form of sheet, strip, and plate. These products have been used typically for formed or moderately-drawn parts requiring corrosion resistance, but usage is not limited to such applications.

Nickel-Copper Alloy, Corrosion Resistant Sheet, Strip, and Plate 67Ni 30Cu, Annealed

SAE AMS2774D-2012 热处理锻造镍合金和钴合金零件

This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts made of wrought nickel or cobalt alloys, of raw materials during fabrication, and of fabricated assemblies in which wrought nickel or cobalt alloys are the primary structural components.

Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts

SAE AMS4439G-2012 4.2Zn 1.2稀土族镁合金铸件.O.7Zr (ZE41A-T5)沉淀热处理

This specification covers a magnesium alloy in the form of sand castings. These castings have been used typically for components requiring uniform medium strength up to 320 °F (160 °C), pressure tightness, good fatigue and creep characteristics, and which may require welding during fabrication, but usage is not limited to such applications.

Magnesium Alloy Castings 4.2Zn 1.2 Rare Earths - O.7Zr (ZE41A-T5) Precipitation Heat Treated

SAE AMS2728C-2012 熟铜铍合金零件热处理

This specification establishes the requirements for heat treatment of wrought copper beryllium parts by users or by their vendors or subcontractors. This specification is applicable to parts made from the following alloys: UNS C17000, UNS C17200, UNS C17300, UNS C17500, and UNS C17510.

Heat Treatment of Wrought Copper Beryllium Alloy Parts

SAE AMS4881D-2012 冷浸淬火与回火78Cu 11Al 5.1Ni 4.8Fe,马氏体镍-铝-铜砂模和连续铸件

This specification covers a nickel-aluminum bronze alloy in the form of sand or centrifugal castings. These castings have been used typically for parts requiring a combination of high strength and hardness with some ductility and toughness, but usage is not limited to such applications.

Nickel-Aluminum-Bronze, Martensitic, Sand and Continuous Castings, 78Cu 11Al 5.1Ni 4.8Fe, Quench Hardened and Tempered Annealed

SAE AMS-G-81937A-2012 公制特净仪器仪表润滑脂

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers the requirements for one grade of an ultra-clean instrument grease with characteristics which permit its use from -54°C to 121°C.

Grease, Instrument, Ultra-Clean, Metric

SAE AMS-G-4343A-2012 气动系统润滑油

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a pneumatic system grease. This grease is identified by NATO Code Number G 392.

Grease, Pneumatic System

SAE AMS-G-6032A-2012 公制NATO代码耐汽油和油的油脂旋塞阀

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers the requirements for two types of gasoline and oil resistant grease for lubrication of tapered plug valves, gaskets, and for other applications in fuel and oil systems. The type I grease is identified by NATO symbol G-363.

Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric

SAE AMS2750E-2012 高温测定法

This specification covers pyrometric requirements for thermal processing equipment used for heat treatment. It covers temperature sensors, instrumentation, thermal processing equipment, system accuracy tests, and temperature uniformity surveys. These are necessary to ensure that parts or raw materials are heat treated in accordance with the applicable specification(s). This specification is not applicable to heating, or to intermediate thermal processing unless specifically referenced by a material or process specification.

Pyrometry

SAE AMS1538B-2012 镁合金用酸性脱氧剂

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers an acidic deoxidizer in the form of a liquid. This product has been used typically for removing oxides and corrosion from magnesium alloys.

Deoxidizer, Acidic, for Magnesium Alloys

SAE AMS4455G-2012 溶解和沉积热处理10A1(AM100A-T6)镁合金熔模铸件

This specification covers a magnesium alloy in the form of investment castings. These castings have been used typically for small intricate parts, which may operate up to 300 °F (149 °C) and are cast to approximate final dimensions, where the intricacy of the part is such that high fluidity of the molten metal is required, but usage is not limited to such applications.

Magnesium Alloy, Investment Castings 10Al (AM100A-T6) Solution and Precipitation Heat Treated (UNS M10100)

SAE AMS4442G-2012 镁合金砂模铸件3.2稀土族2.5Zn 0.70Zr (EZ33A-T5)沉积热处理

This specification covers a magnesium alloy in the form of sand castings. These castings have been used typically for parts operating in service up to 500 °F (260 °C), but have good pressure tightness, but usage is not limited to such applications.

Magnesium Alloy Sand Castings 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5) Precipitation Heat Treated (UNS M12330)

SAE AMS4453F-2012 溶解和沉淀热处理9.0Al 2.0Zn (AZ92A-T6)镁合金熔模铸造

This specification covers a magnesium alloy in the form of investment castings. These castings have been used typically for intricate parts cast to approximate final dimensions, but usage is not limited to such applications.

Magnesium Alloy, Investment Castings 9.0Al 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated

SAE AMS4452E-2012 溶解和沉淀热处理镁合金熔模铸件8.7Al 0.70Zn 0.22Mn (AZ 91C-T6)

This specification covers a magnesium alloy in the form of investment castings. These castings have been used typically for small, intricate parts requiring good strength with good ductility and weldability, but usage is not limited to such applications.

Magnesium Alloy, Investment Castings 8.7Al 0.70Zn 0.22Mn (AZ 91C-T6) Solution and Precipitation Heat Treated

SAE AMS1431D-2012 固体逃逸和滑行道除冰/防冻化合物

This specification covers a deicing and anti-icing compound in the form of a solid. Unless otherwise started, all specifications referenced herein are latest (current) revision. These compounds have been used typically at airports on aircraft maneuvering areas, such as aprons, runways, and taxiways, for the prevention and removal of frozen deposits of snow, frost, and ice, but usage is not limited to such applications.

Compound, Solid Runaway and Taxiway Deicing/Anti-Icing

SAE AMS1435C-2012 液体类除冰/防冻跑道和滑行跑道

This specification covers deicing and anti-icing materials in the form of a fluid. Unless otherwise stated, all specifications referenced herein are latest (current) revision. This deicing/anti-icing fluid has been used typically on runways, taxiways, and other aircraft maneuvering areas for the prevention and removal of frozen deposits of frost and ice. Fluids must not be used to deice/anti-ice aircraft.

Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways