49.025.99 其他材料 标准查询与下载

DIN EN 3102:2013 航空航天系列. 密封剂. 试验方法. 低温柔韧性的测定; 德文和英文版本EN 3102-2013

Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013

DIN EN 3861:2013 航空航天系列. 非金属材料. 玻璃透明度. 材料标准. 热处理碱石灰浮法玻璃; 德文和英文版本EN 3861-2013

Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass; German and English version of EN 3861:2013

SAE AMS-C-6183A-2013 软木制品和橡胶合成物薄片.耐燃料和耐油垫圈用

This specification covers vulcanized sheet made of granulated cork uniformly dispersed in a synthetic rubber compound, for use in gaskets where aromatic fuel or oil resistance is required.

Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

SAE AMS5555E-2013 镍线和镍带的99镍

This specification covers nickel in the form of round wire and rectangular ribbon. These products have been used typically as weldable leads for electronic component parts or as filler wire for welding, but usage is not limited to such applications.

Nickel Wire and Ribbon 99Ni

DIN EN 3862:2013 航空航天系列.非金属材料.玻璃透明胶片.材料标准.化学钢化碱石灰浮法玻璃.德文和英文版本EN 3862-2013

Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass; German and English version EN 3862:2013

BS EN 3102:2013 航空航天系列.密封剂.试验方法.低温韧性的测定

Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility

SAE AS4792A-2013 含水磁粉检验用水质稳定剂

This SAE Aerospace Standard (AS) covers water conditioning agents used to facilitate aqueous wet-method magnetic particle inspection. Such conditioning agents, in powder or liquid form, provide suitable corrosion protection, wetting, and particle dispensability properties when mixed in water for application of magnetic particles on the surface of an object for magnetic particle inspection as described in AMS 3042, AMS 3044, ASTM E1444, and others. Water conditioning agents can consist of varying combinations of such components as dispersants, surfactants, corrosion inhibitors, and anti-foaming agents. Individual components may be added to the bath of a syst

Water Conditioning Agents for Aqueous Magnetic Particle Inspection

SAE AMS4371-2013 4.0Y 2.25Nd 0.5Zr(WE43C-T5)镁合金板材沉淀热处理

Magnesium Alloy, Plate 4.0Y 2.25Nd 0.5Zr (WE43C - T5) Precipitation Heat Treated

SAE AS5502C-2013 航空密封剂和粘合促进剂的标准要求

This document establishes standard requirements for aerospace sealants and adhesion promoters, which may be incorporated as part of Aerospace Material Specifications (AMS) for such products. This document provides for commonality of methods and procedures for responsibility for inspection, source inspection, classification of tests, establishment of/and qualification to qualified products lists, approval, reports, resampling and retesting, packaging, and marking.

Standard Requirements for Aerospace Sealants and Adhesion Promoters

SAE AMS-DTL-22499A-2013 层压衬垫

This specification covers the requirements for surface bonded laminated shim stock.

Shim Stock, Laminated

LST EN 3861-2013 航空航天系列 非金属材料 透明玻璃 材料标准 热钢化钠钙浮法玻璃

Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass

DS/EN 3863:2013 航空航天系列非金属材料玻璃透明制品试验方法平整度的测定

This European Standard defines the requirements for the determination of the flatness of monolithic glass transparencies for aircraft applications. The method is designed to eliminate the effect of the glass deflecting under its own weight, thus eliminati

Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness

LST EN 3866-2013 航空航天系列非金属材料玻璃透明制品试验方法铰和表面波纹的测定

Aerospace series - Non-metallic materials - Glass tranparencies - Test methods - Determination of ream and surface ripple

LST EN 3863-2013 航空航天系列非金属材料玻璃透明制品试验方法平整度的测定

Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness

DS/EN 3866:2013 航空航天系列非金属材料玻璃透明制品试验方法铰和表面波纹的测定

This European Standard defines a qualitative method for the determination of the ream and surface ripple in glass transparencies for aircraft applications.

Aerospace series - Non-metallic materials - Glass tranparencies - Test methods - Determination of ream and surface ripple

DS/EN 3861:2013 航空航天系列 非金属材料 透明玻璃 材料标准 热钢化钠钙浮法玻璃

This European Standard specifies the requirements relating to universally available and high light transmission, thermally tempered float glass plies, for aerospace applications.

Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass

LST EN 3862-2013 航空航天系列 非金属材料 透明玻璃 材料标准 化学钢化钠钙浮法玻璃

Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass

DS/EN 3862:2013 航空航天系列 非金属材料 透明玻璃 材料标准 化学钢化钠钙浮法玻璃

This European Standard specifies the requirements relating to universally available and high light transmission, chemically tempered float glass plies, for aerospace applications.

Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass

SAE AMS2675H-2013 铜焊镍合金填充金属

This specification covers the requirements for producing brazed joints in parts made of steels, iron alloys, nickel alloys, and cobalt alloys by use of nickel alloy filler metal. This process has been used typically for joints requiring high strength and corrosion and oxidation resistance up to 1200 degrees F (649 degrees C), but usage is not limited to such applications.

Brazing, Nickel Alloy Filler Metal

SAE AMS5920A-2013 真空感应加真空自耗电极融化溶解热处理工作增强和老化,改进强度耐蚀耐热钴镍合金圆棒材19Cr 36Co 25Ni 7.0Mo 0.50Cb (Nb) 2.9Ti 0.20Al 9.0Fe

This specification covers a corrosion and heat-resistant, work strengthened and aged cobalt-nickel-chromium alloy in the form of bars 2 inches (50.8 mm) and under in nominal diameter. These bars have been used typically for parts, such as fasteners, requiring a room temperature minimum tensile strength of 170 ksi (1172 MPa) for use up to 850 °F (454 °C) in applications requiring high ductility to promote toughness and resistance to cracking under shock loading conditions, but usage is not limited to such applications. This alloy exhibits exceptionally good resistance to corrosion, crevice corrosion, and stress-corrosion cracking.

Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Round Bars 19Cr 36Co 25Ni 7.0Mo 0.50Cb (Nb) 2.9Ti 0.20Al 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened and Aged, Modified Strength