49.035 航空航天制造用零部件 标准查询与下载
共找到 2321 条与 航空航天制造用零部件 相关的标准，共 155 页
1.1 This photographic practice determines the optical distortion and deviation of a line of sight through a simple transparent part, such as a commercial aircraft windshield or a cabin window. This practice applies to essentially flat or nearly flat parts moreso than to highly curved materials. 1.2 Test Method F801 addresses optical deviation (angular deviation), and Test Method F2156 addresses optical distortion using grid line slope. Use these test methods instead of Practice F733 whenever practical. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
- ICS
- 49.035
- CCS
- 发布
- 2019-11-01
- 实施
What is BS EN 4854 ‑ 1 - Narrow series for aerospace applications about ? BS EN 4854 ‑ 1 is part one of a multi-series of European standards on aerospace series that covers dimensions and loads for narrow series. BS EN 4854 ‑ 1 specifies the characteristics of spherical plain bearings in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series for aerospace applications.
Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series…
- ICS
- 49.035
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
What is BS EN 4854 ‑ 3 - Spherical plain bearings - Technical specification about ? BS EN 4854 ‑ 3 is part one of a multi-series of European standards on aerospace series that covers technical specifications for spherical plain bearings in corrosion resisting steel. BS EN 4854 ‑ 3 specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for spherical plain bearings in corrosion resisting steel with self-lubricating liner, low starting t...
Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions - Technical…
- ICS
- 49.035
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
What is BS EN 4854 ‑ 2 - Wide series for aerospace applications about ? BS EN 4854 ‑ 2 is part two of a multi-series of European standards on aerospace series that covers dimensions and loads wide series. BS EN 4854 ‑ 2 specifies the characteristics of spherical plain bearings in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series for aerospace applications.
Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series -…
- ICS
- 49.035
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
What is BS EN 4539 ‑ 2 - Aerospace - spherical plain bearing about? BS EN 4539 ‑ 2 is part two of a multiseries of european standards on aerospace series that covers inch series of bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner. BS EN 4539 ‑ 2 specifies the characteristics of spherical plain bearing in corrosion resistant steel, with self-lubricating liner, wide series, elevated load under low oscillations applications. Note: They shall be used in the temperature range −55 °C to 163 °C. Who is BS EN 4539 ‑ 2 - Aerospace - spherical plain bearing for ? BS EN 4539 ‑ 2 on aerospace - spherical plain bearing is useful for: Aerospace - spherical plain bearing manufacturers
Aerospace series. Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner. Elevated load under low oscillations. Wide series. Dimensions and loads - Inch series
- ICS
- 49.035
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
- ICS
- 49.035
- CCS
- 发布
- 2019-07-01
- 实施
What is BS EN 6055 - Rod-end with bearing about ? BS EN 6055 is a European standard on aerospace series which covers rod-end with bearing EN 4265 in corrosion resisting steel. BS EN 6055 specifies the characteristics of adjustable rod-ends consisting of: A spherical plain bearing, metal to metal, in corrosion resisting steel, wide series ( EN 4265 ) A rod-end wi...
Aerospace series. Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank. Dimensions and loads. Inch series
- ICS
- 49.035
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
What is BS EN 6133 - Rod-end with bearing about? BS EN 6133 specifies the characteristics of adjustable rod-ends consisting of: A self-aligning spherical plain bearing with self-lubricating liner per EN 6096 Rod-end with threaded shank with an optional longitudinal groove for locking purposes Note: BS EN 6133 is published at edition P2. Former P1 and drafts may exist of Airbus development only but without any ASD-STAN official publication. In consequence configuration management discrepancies with these unofficial documents are under Airbus responsibility. Who is BS EN 6133 - Rod-end with bearing for? BS EN 6133 on rod-end with bearing is useful for : Aerospace parts manufacturers Adjustable rod end manufacturers ...
Aerospace series. Rod-end, with bearing per EN 6096, with self-lubricating liner in corrosion resisting steel, extra wide inner ring, external threaded shank. Dimensions and loads. Inch series
- ICS
- 49.035
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
What is BS EN 6098 - Rod-end with bearing about? BS EN 6098 is a European standard on aerospace series which covers rod-end with bearing per EN 6097 in corrosion resisting steel. BS EN 6098 specifies the characteristics of adjustable rod ends consisting of: A spherical plain bearing, metal to metal, in corrosion resisting steel, extra wide series. A rod–end with threaded shank with an optional longitudinal groove for locking purposes. Note: BS EN 6098 is published at edition P2. Former P1 and drafts may exist of Airbus development only but without any ASD-STAN official publication. In consequence configuration management discrepancies with these unofficial documents are under Airbus responsibility. Who is BS EN 6098 - Rod-end with bearing for? BS EN 6098 on adjustable rod ends in corrosion resisting steel is applicable to: Aerospace parts manufacturers Adjustable rod end manufacturers Dimensions and loads engineers Why should you use BS EN 6098 - Rod-end with bearing ? A rod end bearing is a common type of mechanical joint used on the ends of control rods. The steering columns in most cars, trucks and other vehicles, for example, feature tie rods with a rod end bearing. Of course, tie rods are designed to connect a vehicle's steering rack to its steering knuckle . Adjustable rod ends are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms, which is vital for aeroplane passengers safety. BS EN 6098 on aerospace series of adjust...
Aerospace series. Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank. Dimensions and loads. Inch series
- ICS
- 49.035
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
What is BS EN 6096 about? BS EN 6096 specifies the general characteristics of spherical plain bearings in corrosion resisting steel with self-lubricating liner, extra wide inner ring, and inch series, that are intended for use in fixed or moving parts of the aircraft structure and control mechanisms. Who is BS EN 6096 for? BS EN 6096 on spherical plain bearings applies to: Aerospace and Defence Industries
Aerospace series. Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel. Dimensions and loads. Inch series
- ICS
- 49.035
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
What is BS EN 6056 - Rod-end with bearing about ? BS EN 6056 is a European standard on aerospace series which covers rod-end with bearing per EN 4614. BS EN 6056 specifies the characteristics of adjustable rod-ends consisting of: A self-aligning ball bearing with self-lubricating liner (EN 4614). A rod-end with threaded shank with an optional longitudinal groove for locking purposes. Note: BS EN 6056 is published at edition P2. Former...
Aerospace series. Rod-end with bearing per EN 4614 with self lubricating liner in corrosion resisting steel with external threaded shank. Dimensions and loads. Inch series
- ICS
- 49.035
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
What is BS EN 6097 - Spherical plain bearing about? BS EN 6097 is a European standard on aerospace series which covers inch based spherical plain bearings, metal to metal, in corrosion resisting steel. BS EN 6097 specifies the characteristics of inch based spherical plain bearings, metal to metal, in corrosion resisting steel, extra wide inner ring inch series. Note: BS EN 6097 is published at edition P2. Former P1 and drafts may exist of Airbus development only but without any ASD-STAN official publication. In consequence configuration management discrepancies with these unofficial documents are under Airbus responsibility. Who is BS EN 6097 - Spherical plain bearing for? BS EN 6097 on the characteristics of inch based spherical plain bearings is applicable to: Aerospace parts manufacturers Spherical plain bearings manufacturers Dimensions and loads engineers
Aerospace series. Bearing, spherical plain, metal to metal, extra wide inner ring in corrosion resisting steel. Dimensions and loads. Inch series
- ICS
- 49.035
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
What is BS EN 2584 about? BS EN 2584 specifies the characteristics of spherical plain bearings in corrosion resisting steel, with self ‑ lubricating liner, intended for use in the fixed or moving parts of the aircraft structure and control mechanisms. Who is BS EN 2584 for? BS EN 2584 on the characteristics of spherical plain bearings should be adopted by: Agencies involved in making corrosion resisting steel Aerospace industries
Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Narrow series. Elevated load at ambient temperature. Dimensions and loads
- ICS
- 49.035
- CCS
- 发布
- 2019-03-31
- 实施
- 2019-03-31
What is BS EN 2585 about? BS EN 2585 is a European standard on bearings that discusses the technical specification of the spherical plain bearings. BS EN 2585 specifies the characteristics of spherical plain bearings in corrosion resisting steel, with self-lubricating liner, wide series, for elevated load at ambient temperature, with or without swaging groove, intended for use in the fixed or moving parts of the aircraft structure and control mechanisms. They shall be used in the temperature range −55° C to 163° C. Who is BS EN 2585 for? BS EN 2585 on spherical plain bearings is relevant to: Manufacturer of spherical plain bearings Mechanical engineer
Aerospace series. Bearing, spherical plain in corrosion resisting steel with self-lubricating liner. Wide series. Elevated load at ambient temperature. Dimensions and loads
- ICS
- 49.035
- CCS
- 发布
- 2019-03-31
- 实施
- 2019-03-31
Standard Guide for Classifying Alterations for In-Service Aircraft under FAA Authority Oversight
- ICS
- 49.035
- CCS
- 发布
- 2018-12-01
- 实施
1.1 This guide is intended for Part 23 and predecessor aircraft (see Civil Air Regulations (CAR) 3) and: 1.1.1 Is applicable to aircraft to which Part 43 applies. 1.1.2 Addresses both initial installation and replacement of aircraft articles. 1.1.3 Is a guide for classifying an alteration. 1.1.4 The intended audience of this guide is individuals who have been tasked with evaluating alterations for the purpose of categorizing an alteration for the purpose of satisfying the regulations. 1.1.5 Is an alteration to an article. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Guide for Classifying Alterations for In-Service Aircraft under FAA Authority Oversight
- ICS
- 49.035
- CCS
- 发布
- 2018-12-01
- 实施
What is BS EN 4710 ‑ 01 about? BS EN 4710 is a series of European standards on quick-release fastening systems that discusses the criteria for the workability of quick-release fastening systems. BS EN 4710 ‑ 01 is the first part of a series of documents on quick-release fastening systems. BS EN 4710 ‑ 01 specifies the required characteristics, inspections, tests, quality assurance requirements, conditions for qualification acceptance, and delivery of quick-release fastening systems.
Aerospace series. Quick release fastening systems for non-structural applications. Technical specification
- ICS
- 49.035
- CCS
- 发布
- 2018-11-30
- 实施
- 2018-11-30
What is BS EN 4710 ‑ 03 about? BS EN 4710 is a series of European standards on quick-release fastening systems that discusses the criteria for the workability of a spring clamp. BS EN 4710 ‑ 03 is the third part of a series of documents on quick-release fastening systems. BS EN 4710 ‑ 03 specifies the dimensions, mass, tolerances, and static values of spring clamps for use in fuselage interior equipment and non-structural or secondary structural area. BS EN 4710 ‑ 03 shall be used in conjunction with EN 4710 ‑ 06 and EN 4710 ‑ 07 as described in EN 4710 ‑ 02. The applicable temperature range is −55 °C to 85 °C. ...
Aerospace series. Quick release fastening systems for non-structural applications. Spring clamp
- ICS
- 49.035
- CCS
- 发布
- 2018-11-30
- 实施
- 2018-11-30
What is this standard about? This European Standard specifies preferred test fluids for evaluating the resistance of non-metallic and related materials to the action of fluids. The aim of this document is to rationalise the choice of fluids used for qualification and batch testing of materials. In some cases, the test fluid and conditioning temperatures may closely simulate in-service conditions. However, no direct behaviour with service conditions shall be implied.
Aerospace series. Fluids for assessment of non-metallic materials
- ICS
- 49.035
- CCS
- 发布
- 2018-11-30
- 实施
- 2018-11-30
This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for rod assemblies with two adjustable ends with integrated bolts, designed to withstand static and dynamic loads possible for interior and substructure in the temperature range from -55 °C to 85 °C. It is applicable whenever referenced. For a complete overview see EN 4691-2.
Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification; German and English version EN 4691-1:2017
- ICS
- 49.035
- CCS
- V22
- 发布
- 2018-04-00
- 实施
