49.035 航空航天制造用零部件 标准查询与下载

DIN EN 4695:2018 航空航天系列.整体螺栓拉杆.汇编代码G、H和K;德文和英文版本EN 4695-2017

This standard specifies the dimensions and tolerances of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range -55 °C to 85 °C. The rod ends should not be screwed completely apart.

Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K; German and English version EN 4695:2017

DIN EN 4694:2018 航空航天系列.整体螺栓拉杆.汇编代码D、E和F;德文和英文版本EN 4694-2017

This standard specifies the dimensions and tolerances of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range -55 °C to 85 °C. The rod ends should not be screwed completely apart.

Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F; German and English version EN 4694:2017

DIN EN 4691-1:2018 航空航天系列.整体螺栓拉杆.第1部分:技术规范

This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for rod assemblies with two adjustable ends with integrated bolts, designed to withstand static and dynamic loads possible for interior and substructure in the temperature range from -55 °C to 85 °C. It is applicable whenever referenced. For a complete overview see EN 4691-2.

Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification; German and English version EN 4691-1:2017

DIN EN 4692:2018 航空航天系列.整体螺栓拉杆.锁定夹;德文和英文版本EN 4692-2017

This standard shows the locking clips for the construction kit of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range -55 °C to 85 °C (EN 4691-2).

Aerospace series - Tie Rod with integrated bolts - Locking clip; German and English version EN 4692:2017

BS EN 4691-2:2018 航空航天系列. 带整体螺栓的拉杆. 建筑套件概述

Aerospace series. Tie rod with integrated bolts. Overview construction kit

EN 4691-2:2018 航空航天系列 带集成螺栓的拉杆 第2部分：结构套件概览

Aerospace series - Tie rod with integrated bolts - Part 2: Overview construction kit

ASTM E2580-17 用于航空航天应用的平板复合材料和三明治核心材料的超声波测试标准实践

1.1 This practice establishes two procedures for ultrasonic testing (UT) of flat panel composites and flat sandwich core panels (parallel surfaces). Typical as-fabricated lay-ups include uniaxial, cross ply and angle ply laminates; as well as honeycomb sandwich core materials. These procedures can be used throughout the life cycle of the materials; product and process design optimization, on line process control, after manufacture inspection, and in service inspection. Contact methods such as angle-beam techniques using shear waves, or surface-beam techniques using Lamb waves, are not discussed. 1.2 Ultrasonic testing is a common subsurface method for detection of laminar oriented discontinuities. Two techniques can be considered based on panel surface accessibility; pulse echo for one sided and through transmission (bubblers/ squirters) for two sided. As used in this practice, both require the use of a pulsed straight-beam ultrasonic longitudinal wave followed by observing indications of either the reflected (pulse-echo) or received (through transmission) wave. The general types of anomalies detected by both techniques include foreign materials, delamination, disbond/un-bond, fiber debonding, inclusions, porosity, and voids. 1.3 This practice provides two ultrasonic test procedures. Each has its own merits and requirements for inspection and shall be selected as agreed upon in a contractual document. 1.3.1 Test Procedure A, Pulse Echo (non-contacting and contacting), is at a minimum a single transducer transmitting and receiving a longitudinal wave in the range of 0.5 to 20 MHz (see Fig. 1). This procedure requires access to only one side of the specimen. This procedure can be conducted by automated or manual means. Automated and manual test results may be imaged or recorded. 1.3.2 Test Procedure B, Through Transmission, is a combination of two transducers. One transmits a longitudinal wave and the other receives the longitudinal wave in the range of 0.5 MHz to 20 MHz (see Fig. 2). This procedure requires access to both sides of the specimen. This procedure is automated and the examination results are recorded. 1.4 This practice does not specify accept-reject criteria. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

BS EN 6075:2017 航空航天系列 静态密封元件 O 形圈乙烯-丙烯 模制 耐磷酸酯（- 55 °C 至 107 °C） 英制系列

What is BS EN 6075 - Moulded O-Ring seal elements about?    BS EN 6075 is a European standard on aerospace series that covers static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant.   BS EN 6075 specifies the characteristics of configuration, dimensions, tolerances and mass for moulded O-Ring seal elements, phosphate ester fluid resistant, for use as static seals in hydraulic systems for aerospace application.   Who is BS EN 6075 - Moulded O-Ring seal elements for?  

Aerospace series. Static seal elements O-Ring ethylene- propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C). Inch series

BS EN 4692:2017 航空航天系列 带集成螺栓的拉杆 锁紧夹

What is BS EN 4692 - Tie Rod with integrated bolts about? BS EN 4692 is a European standard on aerospace series which covers tie rod with integrated bolts and its locking clip. BS EN 4692 shows the locking clips for the construction kit of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range −55 °C to 85 °C (EN 4691-2). Who is BS EN 4692 - Tie Rod with integrated bolts for ? BS EN 4692 on tie rod with integrated bolts is useful for:   Aerospace parts manufacturers Tie Rod with integrated bolts manufacturers Why should you use BS EN 4692 - Tie Rod with integrated bolts ? A tie rod or tie bar (also known as a hanger rod if vertical) is a slender structural unit used as a tie and (in most applications) capable of carrying tensile loads only. It is any rod or bar-shaped structural member designed to prevent t...

Aerospace series. Tie Rod with integrated bolts. Locking clip

BS EN 4693:2017 航空航天系列 带集成螺栓的拉杆 汇编代码 A、B 和 C

What is BS EN 4693 - Tie rod with integrated bolts about? BS EN 4693 is a European standard on aerospace series which covers tie rod with integrated bolts and its assembly code A, B and C. BS EN 4693 specifies the dimensions and tolerances of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range − 55 °C to 85 °C. The rod ends should not be screwed completely apart. Who is BS EN 4693 - Tie rod with integrated bolts for ? BS EN 4693 on tie rod with integrated bolts is useful for:   Aerospace parts manufacturers Tie Rod with integrated bolts manufacturers Why should you use BS EN 4693 - Tie rod with integrated bolts ? A tie rod or tie bar (also known as a hanger rod if vertical) is a slender structural unit used as a tie and (in most applications) capable of carrying tensile loads only. It is any rod or bar-shaped structural member designed to prevent the separation of two parts, as in aerospace series. Bolts are one of the most versatile structural fasteners, available in a vast array of configurations to suit different materials and strength requirements. These fasteners differ primarily in thread specification, length, and head shape, with varying combinations of these characteristics resulting in bolts with different functions. BS EN 4693 specifies the dimensions and tolerances of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure. This can benefit you by the use of this info...

Aerospace series. Tie rod with integrated bolts. Assembly code A, B and C

BS EN 4694:2017 航空航天系列 带集成螺栓的拉杆 汇编代码 D、E 和 F

What is BS EN 4694 - Tie rod with integrated bolts about? BS EN 4694 is a European standard on aerospace series which covers assembly code D, E and F of tie rod with integrated bolts. BS EN 4694 specifies the dimensions and tolerances of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range − 55 °C to 85 °C. The rod ends should not be screwed completely apart. Who is BS EN 4694 - Tie rod with integrated bolts for ? BS EN 4694 on tie rod with integrated bolts is useful for:   Aerospace parts manufacturers Tie Rod with integrated bolts manufacturers Why should you use BS EN 4694 - Tie rod with integrated bolts ? A tie rod or tie bar (also known as a hanger rod if vertical) is a slender structural unit used as a tie and (in most applications) capable of carrying tensile loads only. It is any rod or bar-shaped...

Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F

BS EN 4691-1:2017 航空航天系列 带集成螺栓的横拉杆 技术规格

What is BS EN 4691-1 - Tie Rod with integrated bolts about?      BS EN 4691-1 is the first part of the multi series European standard that specifies the required characteristics, inspection, and test methods, qualification and acceptance conditions for rod assemblies with two adjustable ends with integrated bolts, designed to withstand static and dynamic loads possible for interior and substructure in the temperature range from − 55 °C to 85 °C. It is applicable whenever referenced.   For a complete overview see EN 4691-2 .   Who is BS EN 4691-1 - Tie Rod with integrated bolts for?  

Aerospace series. Tie rod with integrated bolts - Technical specification

BS EN 4695:2017 航空航天系列 带集成螺栓的拉杆 装配代码 G、H 和 K

What is BS EN 4695 - Tie rod with integrated bolts about? BS EN 4695 is a European standard on aerospace series which covers assembly code G, H and K of tie rod with integrated bolts. BS EN 4695 specifies the dimensions and tolerances of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range − 55 °C to 85 °C. The rod ends should not be screwed completely apart. Who is BS EN 4695 - Tie rod with integrated bolts for ? BS EN 4695 on tie rod with integrated bolts is useful for:   Aerospace parts manufacturers Tie Rod with integrated bolts manufacturers Why should you use BS EN 4695 - Tie rod with integrated bolts ? A tie rod or tie bar (also known as a hanger rod if vertical) is a slender structural unit used as a tie and (in most applications) capable of carrying tensile loads only. It is any rod or bar-shaped...

Aerospace series. Tie Rod with integrated bolts. Assembly Code G, H and K

BS EN 4702-05:2017 航空航天系列. 用于非结构和衬里应用的快速释放紧固系统. 弹簧垫圈

Aerospace series. Quick release fastening systems for non-structural and lining applications. Retaining washer

BS EN 4702-03:2017 航空航天系列. 用于非结构和衬里应用的快速释放紧固系统. 螺柱快速释放锁定

Aerospace series. Quick release fastening systems for non-structural and lining applications. Stud - quick-release and locking

BS EN 4702-04:2017 航空航天系列. 用于非结构和衬里应用的快速释放紧固系统. 弹簧夹

Aerospace series. Quick release fastening systems for non-structural and lining applications. Spring clamp

BS EN 4702-02:2017 航空航天系列. 用于非结构和衬里应用的快速释放紧固系统. 弹簧夹螺柱组合

Aerospace series. Quick release fastening systems for non-structural and lining applications. Spring clamp stud combination

EN 4694:2017 航空航天系列 带集成螺栓的拉杆 装配代码 D E 和 F

Aerospace series - Tie rod with integrated bolts - Assembly code D@ E and F

EN 4702-03:2017 航空航天系列 非结构和衬里应用的快速释放紧固系统 第03部分：螺柱 快速释放和锁定

Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking

EN 4691-1:2017 航空航天系列 带集成螺栓的拉杆 第1部分：技术规范

Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification