53.020.99 其他起重设备 标准查询与下载

EN 1808:2015 悬吊设备的安全性要求.设计计算,稳定性标准和结构.试验

Application This European Standard specifies the requirements, test methods, marking and information to be provided by the manufacturer/supplier for suspended access equipment (SAE). It is applicable to both permanent and temporary equipment which can be powered or hand operated and which are defined in Clause 3. The requirements of this standard include the rails, tracks and other support systems on which SAE depend for their integrity and safety as well as taking into account all associated loads and fixings to the building structure. This document is not applicable to SAE which is manufactured before the date of its publication as an EN. Hazards This European Standard deals with significant hazards pertinent to SAE when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This European Standard specifies appropriate technical measures to eliminate or reduce risks arising from the significant hazards. Exclusions The following are not covered in this document: a) operation in severe and special conditions (e. g. extreme environmental conditions, corrosive environments, strong magnetic fields); b) operation subject to special rules (e. g. potentially explosive atmospheres, work on live overhead electrical lines); c) transportation of passengers from one level to another; d) handling of loads which could lead to a dangerous situation (e. g. molten metal, acids/bases, radioactive materials); e) working platforms suspended by cranes; f) silo access equipment; g) SAE using chains for the direct suspension of a platform; h) SAE using fibre ropes for the suspension of a platform; i) SAE intended to be used underground; j) SAE intended to be used in shafts; k) SAE directly powered by combustion engines.

Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests

LST EN 1570-1-2011+A1-2015 升降台的安全要求. 第1部分: 提供有两个固定着陆装置的升降台

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings

DIN EN 1570-1:2015 升降台安全要求.第1部分:提供有两个固定着陆装置的升降台;德文版本EN 1570-1-2011+A1-2014

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings; German version EN 1570-1:2011+A1:2014

GOST 33649-2015 升降工作平台. 分类

Elevating work platforms. Classification

GOST 33650-2015 升降工作平台. 术语和定义

Elevating work platforms. Terms and definition

SS 598-2014 悬浮支架的操作规范

This code of practice is intended to establish the minimum safety requirements for the system design, installation, testing and inspection, use and maintenance of working platforms suspended by wire ropes and capable of being raised and lowered by mechanical or manually operated winches and climbing devices. It is applicable to both permanent and temporary equipment.

Code of practice for suspendid scaffolds

EN 1570-1:2011+A1:2014 安全要求取消表-第1部分:提升表提供两个固定着陆 包含修改件A1,2014

This European Standard specifies the safety requirements for industrial lifting tables for raising and/or lowering goods and the operator(s):- where the lifting table does not pass a fixed landing; - serving not more than 2 fixed landings. This European Standard deals with all significant hazards pertinent to lifting tables when they are used as intended by the operating instructions and under the conditions foreseen (including foreseeable misuse) with the operating instructions (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce the risks arising from the significant hazards. Both power operated and manually operated lifting tables are included whether stationary or mobile. This European Standard does not apply to the following equipment; - lifting tables, serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s (EN 1570-2); - lifting tables, serving more than 2 fixed landings of a building for lifting operators, with a vertical travel speed not exceeding 0,15 m/s (EN 1570-3); - lifting tables carrying operators and installed in full enclosures (EN 1570-3); - permanently and temporarily installed lifting tables, serving specific levels of a building for lifting operators, with a vertical travel speed exceeding 0,15 m/s (EN 81-1 and EN 81-2); - lifting tables with flat or toothed belts lifting systems for the carrying of operators; - lifting tables whose vertical travel speed exceeds 0,15 m/s (unless safe by position and non person carrying); - power operated lifting platforms for persons with impaired mobility (EN 81-41); - mobile lifting tables for airport ground support equipment (EN 1915-2 and EN 12312-1); - lifting tables which are designed as part of a lift according to Directive (95/16/EC); - lifting tables used on ships; - mobile elevating work platforms (EN 280); - static elevating work platforms; - vehicle lifts for maintenance (EN 1493); -

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings

JB/T 11963-2014 气动葫芦

本标准规定了气动葫芦的术语和定义、型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于一般环境、爆炸性气体环境及爆炸性粉尘环境用的气动葫芦,其他特殊环境用的气动葫芦可以参照使用。

Air hoists

JB/T 10546-2014 汽车专用升降机

本标准规定了汽车专用升降机的术语和定义、型式与基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用于GB/T 26476中定义的汽车专用升降机(以下简称“升降机”)。本标准不适用于其他类型机械式停车设备。

Lift for vehicle

JB/T 9008.1-2014 钢丝绳电动葫芦 第1部分:型式与基本参数、技术条件

JB/T 9008的本部分规定了钢丝绳电动葫芦的术语和定义、型式与基本参数、技术要求、检验规则、标志、包装、运输和贮存。本部分适用于一般工作环境中使用或吊运熔融金属的钢丝绳电动葫芦(以下简称电动葫芦),其他环境中使用的电动葫芦可以参照采用。本部分不适用于下列环境中使用的电动葫芦:--有爆炸性气体、可燃性粉尘及腐蚀性气体环境;--核辐射环境、有毒气体环境。

Electric wire rope hoists.Part 1: Types and basic parameter, specification

DB51/T 1764-2014 机械式停车设备维修保养安全技术规范

Mechanical parking equipment maintenance safety technical specification

ISO 18893:2014 移动式升降工作平台. 安全原则, 检验, 维护和运行

This International Standard applies to all mobile elevating work platforms (MEWPs) that are intended to position persons, tools and materials and which, as a minimum, consists of a work platform with controls, an extending structure and a chassis. The technical safety requirements of this International Standard apply except where national or local regulations are more stringent. For related information, see ISO 16368. This International Standard applies to MEWPs to achieve the following objectives: a) prevention of personal injuries, property damage, and accidents; b) establishment of criteria for inspection, maintenance, and operation.

Mobile elevating work platforms - Safety principles, inspection, maintenance and operation

DIN EN 280:2014 移动升降工作平台.设计计算.稳定性标准.施工.安全.检查和试验.德文版本EN 280-2013

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests; German version EN 280:2013

GOST 32682.3-2014 "移动式升降工作平台. 设计, 计算, 安全要求和相关试验方法. 第3部分. 果园作业用MEWPs"

Mobile elevating work platfoms. Design,calculations, safety reguirements and test methods relative. Part 3. MEWPs for orchard operations

ANSI/ASME B30.21-2014 杠杆提升机(原手动杠杆操作提升机)

Lever Hoists (formerly Manually Lever Operated Hoists)

JB/T 8910-2013 升降横移类机械式停车设备

本标准规定了升降横移类机械式停车设备的术语和定义、型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于GB/T 26476中定义的升降横移类机械式停车设备(以下简称停车设备)。

Lift-sliding mechanical parking system

JB/T 11699-2013 高处作业吊篮安装、拆卸、使用技术规程

本标准规定了高处作业吊篮(以下简称吊篮)的安装、拆卸和使用维护方面的技术规程。本标准适用于高处作业工程中使用的电动吊篮、手动吊篮。本标准不适用于工具式脚手架、附着式升降脚手架。

Technical specification for installation dismantlement and operation of temporarily installed suspended access equipment

JB/T 8909-2013 简易升降类机械式停车设备

本标准规定了简易升降类机械式停车设备的术语和定义、型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于GB/T 26476中定义的简易升降类机械式停车设备(以下简称停车设备)。

Easy lifting mechanical parking system

JB/T 9229-2013 剪叉式升降工作平台

本标准规定了剪叉式升降工作平台的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存、操作与使用。本标准适用于剪叉式升降工作平台(以下简称剪叉式平台)。

Scissors elevating work platforms

JB/T 11700-2013 移动式升降工作平台 桥梁检测与维护用工作平台

本标准规定了移动式升降工作平台桥梁检测与维护用工作平台(以下简称桥检平台)的术语和定义、分类与标志、要求、试验方法、检验规则、信息标志、包装、运输和贮存、安全使用的一般原则要求。本标准适用于桁架移动式桥检平台。本标准不适用于固定安装在桥梁下部的检测与维护专用设备。

Mobile elevating work platforms.Work platforms for bridge inspection and maintenance