53.020.99 其他起重设备 标准查询与下载

DB41/T 1841-2019 巷道堆垛类机械式停车设备监督检验规范

Specification for supervision and inspection of roadway stacking mechanical parking equipment

DB41/T 1839-2019 汽车专用升降机类机械式停车设备监督检验规范

Specifications for the supervision and inspection of mechanical parking equipment for automobile lifts

DB41/T 1838-2019 垂直循环类机械式停车设备监督检验规范

Specification for supervision and inspection of vertical circulation mechanical parking equipment

JB/T 9007-2018 起重滑车

Lifting tackle

T/ZZB 0843-2018 环链手扳葫芦

本标准规定了环链手扳葫芦的基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量承诺（以下简称“手扳葫芦”）。 本标准适用于一般用途的渐开线直齿圆柱齿轮传动的手扳葫芦。 本标准不适用于爆炸性环境中使用的手扳葫芦。

Chain lever hoists

DB41/T 1725-2018 钢丝绳电动葫芦振动检测和评价

Vibration detection and evaluation of wire rope electric hoist

T/ZZB 0724-2018 手拉葫芦

本标准规定了手拉葫芦的基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量承诺。 本标准适用于一般用途的渐开线直齿圆柱齿轮传动的手拉葫芦。 本标准不适用于爆炸性环境中使用的手拉葫芦。

Hand chain blocks

T/ZZB 0722-2018 链条式升降横移类机械式停车设备

本标准规定了链条式升降横移类机械式停车设备的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本标准适用于二层至六层、采用链条传动的升降横移类机械式停车设备（以下简称停车设备）。

Chain drived lift-sliding mechanical parking system

T/CPARK 2-2018 绝缘钢丝绳电动葫芦通用技术要求

规定了绝缘钢丝绳电动葫芦的技术要求、试验方法、检验规则、标志、包装、运输与贮存等要求

General technical requirements for insulated wire rope electric hoists

T/ZZB 0459-2018 铝合金环链紧线器

本标准规定了铝合金环链紧线器的术语和定义、基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于牵引作业的铝合金环链紧线器（以下简称紧线器）。

Chain puller with aluminum alloy body

JB/T 12478-2018 起重机用立式减速器

Vertical reducer for crane

JB/T 13482-2018 擦窗机规划设计和使用安全规程

Window cleaning machine planning, design and safety regulations for use

DB41/T 1584-2018 机械停车设备安装与拆卸安全要求

Safety requirements for installation and disassembly of mechanical parking equipment

NF E52-617*NF EN 16719:2018 运输平台

Transport platforms

T/ZZB 0268-2017 微型电动葫芦

本标准规定了微型电动葫芦的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输、贮存和服务承诺。 本标准适用于一般环境中使用的起重量小于1000 kg的微型电动葫芦（以下简称电动葫芦）。 本标准不适用于在有爆炸性气体、可燃性粉尘、有毒气体、腐蚀性气体、核辐射环境下使用的电动葫芦，也不适用于无线控制的电动葫芦。

Mini electric hoists

JB/T 2592-2017 螺旋千斤顶

本标准规定了0.5~100t螺旋千斤顶的型式和基本参数、技术要求、检验规则，以及标志和包装。 本标准适用于汽车、桥梁、船舶及钢结构工程用机械式螺旋千斤顶。其他型式的螺旋千斤顶亦应参照使用。

screw jack

JB/T 5315-2017 卧式油压千斤顶

Horizontal hydraulic jack

BS 7981:2017 桅杆攀登工作平台(MCWP)的安装、维护、彻底检查和安全使用操作规范

What is this standard about? It’s about mast climbing work platform (MCWP) safety. It offers recommendations and guidance on the installation, dismantling, maintenance and thorough examination of MCWPs. It also gives recommendations and guidance on their safe use. Who is this standard for? Users will come from many industry sectors including:  Building construction and maintenance Telecommunications Tree surgery Rental industry Training companies The standard will be used by:  Employers, managers, supervisors and operators of MCWPs Safety professionals Training and educational establishments Trade and industry federations Rental companies Manufacturers Enforcement authorities and standard agencies Why should you use this standard? Working at height is a high risk activity. Using this standard maximizes the likelihood that appropriate MCWPs are selected for use and that they are positioned, used, maintained and examined safely. What’s changed since the last update? Since BS 7981:2002 was published there have been significant technical developments affecting machine design, safety and working practices. Major changes to the standard include: a) Greater detail on the implementation of a risk assessment b) Simplification of the responsibilities for the safe operation of an MCWP, including: The removal of the term “user” and its replacement with “operator” The introduction of recommendations for the “appointed person (user)” and the“appointed person (supplier)” The recommendation for a trained installer to remove and reinstall a top tie Clarification of the role of the demonstrator c) The replacement o...

Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs)

BS 6037-1:2017 永久安装的接入设备的规划、设计、安装和使用 实践守则 悬挂式接入设备

What is this standard about? It gives guidance and recommendations on the planning, design, installation, safe use, examination, maintenance and testing of permanently installed suspended access equipment (SAE).  NOTE 1: SAE is generally a platform suspended by steel wire ropes from a securely mounted overhead structure (suspension rig). It is normally capable of being raised and lowered and moved laterally across the façade of a building. SAE includes equipment installed on a building to assist with continuing routine maintenance of the building.  NOTE 2: This British Standard does not cover industrial rope access and work positioning techniques, recommendations for which are given in BS 7985 . Who is this standard for? It will be used in a wide range of sectors including:  Building construction and maintenance, including building refurbishment Transport Shipbuilding and marine engineering Food and manufacturing industries Telecommunications Entertainment Equipment hire Work at height training organizations Test bodies Within these sectors responsibility for design and safe use and operation lies with the manufacturers and designers of SAE who will use the standard for design and quality management.  Building owners, facility managers, safety officers and specifiers will use the standard to ensure the provision of safe equipment in construction, refurbishment and facilities management. Other users will include: Architects Structural and construction engineers Specialist access consultants Principal designers

Planning, design, installation and use of permanently installed access equipment. Code of practice. Suspended access equipment

BS 8460:2017 安全使用 MEWPS 操作守则

What is this standard about? This standard is about helping organizations use mobile elevating work platforms (MEWPs) safely. It provides guidance and recommendations on selection, hiring, positioning, maintenance and thorough examination of MEWPs. It also includes recommendations on their safe use, including on the selection and training of operators and other competent personnel.  NOTE: This British Standard does not give recommendations for delivering persons and materials to fixed landing levels. Equipment intended for this purpose, such as lifts or hoists, is dealt with by other standards including BS EN 12158-1, Builder's hoists for goods, BS EN 12159, Builder's hoists for goods and passengers and BS EN 81, Safety rules for the construction and installation of lifts.  This British Standard is not applicable to: Mast climbing work platforms  Firefighting and fire rescue appliances  Non-integrated working platforms on forklift trucks  Lifting tables  Suspended access equipment  Building maintenance units  Construction hoists  Transport platforms  Wind turbine and tower crane access lifts  Belt and chain conveyors  Capstan winches  Hoists powered by direct drive internal combustion engines Who is this standard for?   There are more than 60,000 MEWPs in operation in the UK. They are typically used in: Building construction and maintenance Telecommunications Tree surgery Highways maintenance Sign erection Film and TV programme production This standard will be important to anyone responsible for the safe use and operation of MEWPs, including: Premises owners Employers Managers Operators Trainers  Why should you use th...

Code of practice for the safe use of MEWPS