共找到 524 条与 其他起重设备 相关的标准,共 35 页
本标准规定了手拉葫芦的分类、技术要求、试验方法、检验规则以及标志和包装。 本标准主要适用于额定起重量为0.5~32t一般用途的渐开线直齿圆柱齿轮传动的手拉葫芦,其它结构形式的手拉葫芦亦应参照使用。
Hand chain hoist
本标准规定了剪叉式高空作业平台(以下简称“剪叉式平台”)的术语和定义、基本要求、技术要求、检查和试验方法、检验规则、标志、包装、运输和贮存、操作与使用、质量承诺。 本标准适用于平台最大高度不小于2m的拖行移动剪叉式和自行移动剪叉式高空作业平台。 本标准不适用车载移动剪叉式高空作业平台和固定剪叉式高空作业平台。
Self-propelled scissors aerial work platform
本标准适用于曳引式简易升降机和强制式简易升降机的出厂检验、定期检验、监督检验和型式试验。其他结构型式的简易升降机检验可参照使用
Simple lift inspection rules
Electric hoist energy efficiency limit
Terminology and classification of lifting work platforms
本标准规定了环链电动葫芦的术语和定义、型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于一般工作环境中使用或吊运熔融金属的环链电动葫芦,其他环境中使用的环链电动葫芦可以参照使用。 本标准不适用于下列环境中使用的环链电动葫芦(以下简称环链葫芦):有爆炸性气体、可燃性粉尘和腐蚀性气体环境。
Electric chain hoists
Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
Scope is not provided for this standard
Elevating work platforms -- Mast-climbing work platforms
Boom lifting working platform
JB/T 9008的本部分规定了钢丝绳电动葫芦的基本试验要求以及各项试验的试验内容及方法。 本部分适用于一般环境中使用或吊运熔融金属的钢丝绳电动葫芦(以下简称电动葫芦)。其他环境中使用的电动葫芦可参照采用。
Electric wire rope hoists.Part 2: Testing method
Line pole comprehensive work vehicle
Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests; German version EN 1808:2015
This European Standard specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis. NOTE Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs. This European Standard is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards. It does not cover the hazards arising from: a) use in potentially explosive atmospheres; b) electromagnetic incompatibility; c) work from the platform on external live electric systems; d) use of compressed gases for load bearing components; e) getting on and off the work platform at changing levels; f) specific applications (e. g. railway, ships) covered by National or local regulations. This European Standard does not apply to: a) machinery serving fixed landings (see e. g. EN 81-1 and EN 81-2, EN 12159); b) fire-fighting and fire rescue appliances (see e. g. EN 1777); c) unguided work cages suspended from lifting appliances (see e. g. EN 1808); d) elevating operator position on rail dependent storage and retrieval equipment (see EN 528); e) tail lifts (see EN 1756-1 and EN 1756-2); f) mast climbing work platforms (see EN 1495); g) fairground equipment; h) lifting tables (see EN 1570-1); i) aircraft ground support equipment (see e. g. EN 1915-1 and EN 1915-2); j) elevating operator positions on industrial trucks (see EN 1726-2). Classification: MEWPs are divided into two main groups: a) Group A: MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines. b) Group B: All other MEWPs. Relating to travelling, MEWPs are divided into three types: 1) Type 1: Travelling is only allowed with the MEWP in its transport configuration; 2) Type 2: Travelling with raised work platform is controlled from a point of control at the chassis; 3) Type 3: Travelling with raised work platform is controlled from a point of control at the work platform. NOTE Type 2 and type 3 can be combined.
Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
Safety requirements for suspended access equipment. Design calculations, stability criteria, construction. Examinations and tests
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号